Instruction/ maintenance manual of the product EMR963HG Oregon Scientific
Go to page of 12
1 MULTI-CHANNEL IN-OUT CABLE FREE THERMO-HYGROMETER MODEL : EMR963HG USER’S MANUAL INTRODUCTION Congratulations on your purchase of Oregen Scientific's Cable-Free Thermo-Hygro sensor. Enclosed with this package is one (1) main display unit and one (1) cable-free remote thermo-hygro sensor unit.
2 A Extra large two-line Liquid Crystal Display (LCD) Multifunction display showing temperature and humidity, max./min. memory, and trend indicators for the main unit and remote sensors.
3 H Wall-mount holder Supports the remote unit in wall-mounting I Removable table stand For standing the remote unit on a flat surface BEFORE YOU BEGIN To ensure proper functioning of the EMR963HG follow this setup procedure. For best operation: 1. Assign different channels to different remote units.
4 Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. 2. Select the channel number on the CHANNEL slide switch. 3. Select the temperature display unit on the °C/°F slide switch. 4. Insert the batteries strictly according to the polarities shown therein.
5 GETTING STARTED Once batteries are placed in a given remote sensor unit, it will start transmitting information at 40-second intervals. Also, for approximately a 3-minute duration, the main unit will automatically search for signals once batteries are installed.
6 The unit is in searching mode. Transmission data are securely registered. No signals. THE COMFORT-LEVEL ICONS The comfort level is based on the recorded relative humidity. An indicator will be displayed ot show if the level is comfortable, wet or dry.
7 To deactivate the remote-sensor scanning mode: • Press any button. MAXIMUM AND MINIMUM TEMPERATURE AND HUMIDITY The maximum and minimum recorded temperature and humidity readings will automatically be stored in the memory. To display the maximum and minimum display memory: 1.
8 Note: The temperature range is from -50°C (-58°F) to +70°C (158°F). If this is the first time you set the limits, the lower limit will start from -50°C (-58°F) and the upper limit +70°C (158°F). Otherwise, the reading will start from the temperature last selected.
9 TRANSMISSION COLLISION Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product.
10 THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully.
11 General RF Transmission Frequency : 433 MHz No. of Remote unit : Maximum of 3 RF Transmission Range : Maximum 30 meters Temperature compensation : 0.1° C to ( 0.2°F) Temperature sensing cycle : around 40 seconds Power Main unit : 2 pcs UM-3 or “AA” 1.
12 CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display.
An important point after buying a device Oregon Scientific EMR963HG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific EMR963HG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific EMR963HG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific EMR963HG you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific EMR963HG will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific EMR963HG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific EMR963HG.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific EMR963HG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific EMR963HG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
