Instruction/ maintenance manual of the product EMR812 Oregon Scientific
Go to page of 11
1 GB MULTI-CHANNEL IN-OUT CABLE FREE THERMOMETER MODEL: EMR812 USER’S MANUAL INTRODUCTION Congratulations on your purchase of the EMR812 Multi-Channel In-Out Thermometer with 433MHz cable free sensor. The EMR812 is an easy-to-use, state-of-the-art thermometer.
2 GB L WALL - MOUNT RECESSED HOLE For mounting the main unit on a wall FEATURES: REMOTE THERMO-HYGRO SENSOR A EXTRA LARGE TWO - LINE DISPLAY Facilitates easy reading of remote and indoors temperatures.
3 GB A . TWO-LINE LCD Displays the current temperature and humidity monitored by the remote unit B. LED INDICATOR Flashes when the remote sensor transmits a reading C . °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenheit (°F) D . CHANNEL SLIDE SWITCH Select the remote sensor Channel 1, Channel 2 or Channel 3 E.
4 GB 4 . Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and secure its screws. Replace the batteries when the low-battery indicator of the particular channel lights up on the main unit.
5 GB If no signals are received, blanks “ ” will be displayed and the kinetic wave icon will show “ ”. Press CHANNEL and MEM simultaneously to enforce another search for about 30 seconds. This is useful in synchronizing the transmission and reception of the remote and main units.
6 GB HOW TO USE TEMPERATURE ALARMS The temperature alarms allow you to set the upper and lower limits of readings for individual channels. The alarm will activate if a limit is exceeded. To set the alarm, 1. Select the channel to be set. 2. Press the HI/LO button for the upper (HI) or lower (LO) limit.
7 GB As for the remote unit, it comes with a wall-mount holder and a removable stand. Use either to hold the unit in place. THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button.
8 GB PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: 1. Do not immerse the unit in water. 2. Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuit.
9 GB Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC : NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display.
MODEL: EMR812 MUL TI-CHANNEL IN-OUT CABLE FREE THERMOMETER Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento.
An important point after buying a device Oregon Scientific EMR812 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific EMR812 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific EMR812 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific EMR812 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific EMR812 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific EMR812, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific EMR812.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific EMR812. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific EMR812 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
