Instruction/ maintenance manual of the product BAR938HG Oregon Scientific
Go to page of 7
GB 1 CABLE FREE WEATHER STATION MODEL: BAR938HG USER’S MANUAL INTRODUCTION Thank you for selecting the BAR938HG Top Weather Station. BAR938HG is an all-in-one clock and weather device.
GB 2 L ° C/ ° F SLIDE SWITCH Selects between Centigrade ( ° C) and Fahrenheit ( ° F) display M RELATIVE HUMIDITY WINDOW Displays the relative humidity N COMFORT INDICATOR Indicates the comfort lev.
GB 3 4. Insert the batteries strictly according to the polarities shown. 5. Replace the battery compartment door and secure its screws. Replace the batteries when the low-battery indicator of the particular channel lights up on the main unit.
GB 4 automatically which is indicated by the appearance of the [ ] symbol. To disable this function, press the DOWN button in the Pre Alarm mode. The [ ] symbol will disappear to indicate that it is disabled. The pre-alarm will operate during the selected time interval before the daily alarm time.
GB 5 NOTE ON ° C AND ° F The outdoor temperature display on the main unit is dominated by the selection on the ° C/ ° F slide switch of the main unit. Whatever the display unit of the remote sensor is, it will only apply to the remote sensor itself and the temperature will be automatically converted to the chosen one of the main unit.
GB 6 Table-stand First, unlock the two panels by pressing the unlock button. Lay the control panel on a flat surface. Then adjust the angle of the display panel for best display and support. HOW TO RESET THE UNIT The RESET button allows you to return all settings to its factory values.
GB 7 Remote Temperature measurement Proposed operating range : -5.0 ° C to +50.0 ° C (23.0 ° F to 122.0 ° F) Temperature resolution : 0.1 ° C (0.2 ° F) Relative Humidity Measurement Indoor relative humidity : 25% RH to 95% RH measurement range Resolution : 1% R H Remote unit Measuring range : -20.
An important point after buying a device Oregon Scientific BAR938HG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR938HG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR938HG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR938HG you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR938HG will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR938HG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR938HG.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR938HG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR938HG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
