Instruction/ maintenance manual of the product BAR936HG Oregon Scientific
Go to page of 15
W eather Station with Scrolling Message Alerts Model: BAR933HG / BAR936HG User Manual BAR933HG Eng Cover R7 OP 8/20/04, 11:03 PM 1 Black.
EN 1 CONTENTS Contents ................................................................... 1 Introduction .............................................................. 1 Product Overview .................................................... 2 Front View .
EN 2 1. LCD display 2. MODE: Change settings / display 3. MEMOR Y : View current, maximum and minimum temperature / humidity / UV readings 4. HISTOR Y : View historical barometer / temperature / humidity and UV readings 5. MESSAGE: View dif ferent messages 6.
EN 3 2 1 3 4 5 1 3 4 5 2 6 7 8 9 10 1 2 4 5 3 6 7 8 9 10 13 1 1 12 LCD DISPLA Y 1. Weather Forecast Area: Animated weather forecast 2. Clock / Alarm / Calendar Area: Radio-controlled clock; alarms; calendar 3. UVI / Barometer Area: UV Index and barometric pressure readings 4.
EN 4 REMOTE SENSOR (RTGR368N) 1 2 3 4 1. LCD display 2. LED status indicator 3. V entilation duct 4. Fold-out stand 1. Signal reception 2. T ime 3. Channel number 4. T emp / humidity readings 5. Low battery icon 6. T emp ( ° C or ° F) 7. Humidity % 1 2 3 4 5 6 7 Made in PR C RTGR368 N SEARCH RESET 12 3 4 5 CHANNEL EU UK C F 1 3 4 5 2 6 7 1.
EN 5 GETTING ST ARTED BA TTERIES Batteries are supplied with this product: • Main unit 4 x UM-4 (AAA) 1.5V • Remote unit 2 x UM-3 (AA) 1.5V Insert batteries before first use, matching the polarity as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit.
EN 6 T o fold out the stand: T o use the wall mount: For best results: • Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor . • Place the sensor out of direct sunlight and moisture. • Do not place the sensor more than 70 metres (230 feet) from the main (indoor) unit.
EN 7 RF clock enabled: RF clock disabled: SET CLOCK Y ou only need to do this if you have disabled the radio- controlled clock, or if you are too far from a RF signal. 1. Press SELECT to navigate to the Clock Area. will show next to the Area. 2. Press and hold MODE for 2 seconds.
EN 8 ACTIV A TE ALARM Navigate to the Clock Area, then press ALARM / to switch to Daily Alarm or Pre-Alarm view . T o activate or deactivate the alarm, press UP or DOWN . When the alarm time is reached, the backlight will be on for 5 seconds and crescendo alarm will sound for 2 minutes.
EN 9 2. Press CHANNEL to select user 1-4. 3. Press and hold MODE for 2 seconds to enter the Skin T ype Setting Mode of the selected user . 4. Press UP or DOWN to choose 1 of the 4 skin type settings. Then press MODE to confirm and enter the SPF Set Up Mode.
EN 10 ZONE WET COM TEMPERA TURE HUMIDITY Any >70% 20-25 ° C (68-77 ° F) 40-70% DRY Any <40% This information is shown in the Humidity Area when the current measurement is displayed. HEA T INDEX The Heat Index advises 4 levels of warning if the temperature is high.
EN 11 MESSAGE DEFINITION Heat Index N / A Possibility of heat exhaustion Strong heat: Possibility of dehydration V ery strong heat: Heat exhaustion likely Intense heat: Strong possibility of heat stroke 26.7 ° C to 32.2 ° C / 80 ° F to 90 ° F 32.2 ° C to 40.
EN 12 SPECIFICA TIONS Main Unit Dimensions L x W x H 295 x 86 x 1 10 mm (1 1.61 x 3.39 x 4.33 inches) Weight 386 grams (0.85 lbs) without battery Remote Unit Dimensions L x W x H 70 x 24.
EN 13 EC-DECLARA TION OF CONFORMITY This product contains the approved transmitter module that complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.
© 2004 Oregon Scientific. All Rights Reserved. P/N.: 086-003589-019 BAR933HG Eng Back R7 OP 8/20/04, 11:03 PM 1 Black.
An important point after buying a device Oregon Scientific BAR936HG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR936HG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR936HG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR936HG you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR936HG will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR936HG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR936HG.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR936HG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR936HG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
