Instruction/ maintenance manual of the product BAR888 Oregon Scientific
Go to page of 14
1 GB WEATHER FORECAST MULTI-CHANNEL IN-OUT THERMOMETER WITH CABLE FREE SENSOR AND RADIO CONTROLLED CLOCK MODEL: BAR888 USER’S MANUAL INTRODUCTION Congratulations on your purchase of the BAR888 Weather Fore- cast Multi-Channel In-Out Thermometer with 433MHz cable free sensor and radio-controlled calendar clock.
2 GB FIVE-LINE DISPLAY Facilitates easy reading of weather forecast, remote and indoors temperatures and calendar clock CHANNEL BUTTON Selects among different channels MEMORY BUTTON Recalls the maximu.
3 GB LCD Displays the current temperature monitored by the remote unit LED INDICATOR Flashes when the remote unit transmits a reading °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenhe.
4 GB 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and secure its screws. 6. Using a blunt styles such as a paper clip, press RESET. Note: To avoid malfunction, alway press reset after battery replacement.
5 GB 3. Replace the battery compartment door. Replace the batteries when the low-battery indicator of the indoors temperature lights up. (Repeat the steps described in section “BEFORE YOU BEGIN”) LOW BATTERY WARNING When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected.
6 GB THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. GETTING STARTED Once batteries are in place for the remote units, they will start transmitting temperature readings at 30-second intervals.
7 GB HOW TO READ THE KINETIC WAVE DISPLAY The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: The unit is in searching mode.
8 GB WEATHER FORECAST FUNCTION Your BAR888 detects barometric pressure changes and the LCD displays the illustrated weather symbols which indicates the weather forecast for 12 to 24 hours ahead, for an area with a radius of about 30-50 km. Important: 1.
9 GB When the reception is complete, the radio reception signal will stop blinking. The strength of the reception for the last full hour will be indicated. For better reception, place the clock away from metal objects and electrical appliances to minimize interference.
10 GB HOW TO SET THE CLOCK MANUALLY To set the clock manually, hold MODE/SET for three seconds. The display will return to MODE 1, with the hour digits blinking. Use ( ) or ( ) to select the hour. Press and hold to increase or decrease the value rapidly.
11 GB TIME ZONE AND OFFSET TABLE SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature measurement Displayed IN temperature range : -9.9°C to +70.0°C (14.2°F to 158.0°F) Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.
12 GB Remote Temperature measurement Displayed OUT temperature range : -50.0°C to +70.0°C (-58.0°F to 158.0°F) Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.0°F) Temperature resolution : 0.1°C (0.2°F) Remote unit Displayed range : -50.
13 GB instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
14 GB MODEL: BAR888 WEA THER FORECAST MUL TI-CHANNEL IN-OUT THERMOMETER WITH CABLE FREE SENSOR AND RADIO CONTR OLLED CLOCK Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manu.
An important point after buying a device Oregon Scientific BAR888 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR888 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR888 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR888 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR888 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR888, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR888.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR888. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR888 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
