Instruction/ maintenance manual of the product XL2070RHSM Oreck
Go to page of 8
U SER ’ S G UIDE •IMPOR T ANT• SA VE THIS BOOKLET! COMMERCIAL XL2070RHSM HIGH SPEED UPRIGHT V ACUUM CLEANER WITH CLEANING SYSTEM ® SIMPL Y AMAZING ® Includes: • Safety W arnings • W arrant.
2 When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER W ARNING T o reduce the risk of fire, electric shock, or injury: IMPOR T ANT SAFETY INSTRUCTIONS • Do not leave appliance unattended when plugged in.
3 W arr anty ORECK MANUF ACTURING COMP ANY : (Oreck gives you the following limited warranty for this product only if it was originally purchased for use, not resale, from Oreck or an Oreck Authorized Retail Dealer .
4 O per ating I nstructions T o Operate Make sure disposable paper filter dust bag is in place. DO NOT operate the cleaner without a paper filter dust bag. Plug the power cord into an electrical outlet and press the On (l) - OFF (O) switch on Helping Handle Assembly , or on top of base for Straight Handle Models when ready to operate.
5 All paper dust bags are not the same. Y our ORECK disposable dust bags have been designed to be used with the ORECK cleaner . Using bags other than genuine ORECK disposable bags will affect the cleaning ability of your cleaner and could cause damage to it.
6 W ARNING: Unplug cord from electrical outlet before servicing. Remove the replacement belt from the storage channel. Remove the door by removing the hold down screw located on side of power head. Slide the door for ward by pr ying open with a screwdriver or coin.
IMPORT ANT : On plush and new carpets, stuffing may occur due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner , many older carpets will cause stuffing when the cleaner is first used on them.
75628-03 REV B ©2005 Oreck Holdings, LLC. All Rights Reserved.All word marks, logos, product configurations, and registered tradmarks are owned and 05/05 ECN# R-8018 used under the authority of Oreck Holdings, LLC.
An important point after buying a device Oreck XL2070RHSM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oreck XL2070RHSM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oreck XL2070RHSM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oreck XL2070RHSM you will learn all the available features of the product, as well as information on its operation. The information that you get Oreck XL2070RHSM will certainly help you make a decision on the purchase.
If you already are a holder of Oreck XL2070RHSM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oreck XL2070RHSM.
However, one of the most important roles played by the user manual is to help in solving problems with Oreck XL2070RHSM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oreck XL2070RHSM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
