Instruction/ maintenance manual of the product QS110 Oreck
Go to page of 12
SIMPL Y AMAZING ® U SER ’ S G UIDE •IMPOR T ANT• SA VE THIS BOOKLET! Includes: Important Safety Instructions W arranty Operating Instructions M ODEL QS110 S ERIES 40322-01 REV A.
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER W ARNING T o reduce the risk of fire, electric shock, or injury: IMPOR T ANT SAFETY INSTRUCTIONS • Do not use outdoors or on wet surfaces.
2 W arranty ORECK MANUF ACTURING COMP ANY : (ORECK gives you the following limited warranty for this product only if it was originally purchased for use, not resale, from ORECK or an ORECK Authorized Retail Dealer .
3 Assembly Model QS1 10 Series 1. Main housing 2. Hand held vacuum 3. Power head 4. Dirt Cup 5. ON/OFF handle switch 6. Handle control button 7. Release button for hand held vacuum 8. Charging socket 9. Hand held vacuum ON/OFF switch 10. Charging lamp 1 1.
4 Start-Up Instructions The box should include (a) Main housing ( fig. 1 ) (b) Power head ( fig. 1 ) (c) Adapter (power supply/charger) (d) User ’s Guide Fig 1. Insert the power head into the air intake of the main unit. Charging the Unit Fig 2. Before charging, make sure both switches are in the “OFF” position.
5 Combining/Detaching Hand V ac Fig. 5 T o remove the hand held unit, push the release button and pull the hand held unit outward. Fig. 6 T o replace the hand held unit, insert the air intake of the hand held unit into the main housing (at the base of the unit).
12 10 Operating Instructions Cleaning the Dust Filter Fig. 9 Empty dirt cup. Fig. 10 Remove the filter frame from the dust filter . Fig. 1 1 W ash the filter in warm soapy water , using a soft brush if necessary . Dry the filter completely before replacing it into the filter frame and dirt cup.
What happens if the red charging indicator is not lit while charging? Suction power is not sufficient. Running time is not sufficient. Machine does not stop when switched off. Brush does not work while operating. Hand held unit works, but the stick broom does not.
T o preserve natural resources, please recycle or dispose of expired battery pack properly . THIS PRODUCT CONT AINS A NICKEL-CADMIUM BA TTERY . IT MUST BE DISPOSED OF PROPERL Y . LOCAL, ST A TE, OR FEDERAL LA WS MA Y PROHIBIT DISPOSAL OF NICKEL- CADMIUM BA TTERIES IN ORDINARY TRASH.
9.
10.
© 2004 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks are owned and used under the authority of Oreck Holdings, LLC.
An important point after buying a device Oreck QS110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oreck QS110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oreck QS110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oreck QS110 you will learn all the available features of the product, as well as information on its operation. The information that you get Oreck QS110 will certainly help you make a decision on the purchase.
If you already are a holder of Oreck QS110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oreck QS110.
However, one of the most important roles played by the user manual is to help in solving problems with Oreck QS110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oreck QS110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center