Instruction/ maintenance manual of the product Q300 Optoma Technology
Go to page of 26
User’s Guide Optoma MirrorBoard Q300 .
2 Index Chapter 1 3. Overview Chapter 2 4. Setting-Up the MirrorBoard 5. Install the Software Driv ers 6. Microsoft .NET Framework 2.0 “Wind ows XP only” 9. Wireless USB WinD rivers 10. USB Tablet Manager 11. Power Presenter RE 12. DisplayLink Graphics Adapter Software 13.
3 Chapter 1 Overview Compatible Operating Systems: Windows XP, Windows Vista or Windows 7 Battery Life: 2.5 hours of continuous use Resolution: WSVGA (1024 x 600) The Optoma MirrorBoard gives .
4 Chapter 2 Setting-Up the MirrorBoar d There are several tasks that you should perfo rm pr ior to your first use of the MirrorBoard: 1) Charge MirrorBo.
5 Install the Software Drivers 1. Insert the included MirrorBoard CD into your computer disk drive. If the menu does not automatically open, locate the CD-ROM drive on your PC and double click on “Autorun.exe.” 2. On the MirrorBoard CD Menu, choose the appropriate drivers for your operating system (Windows XP or Windows 7 / Vista).
6 Once you click on Next, the installation of several drivers will commence, one at a time. Windows may request a restart. Select cancel and do not restart the computer until all drivers are installed. Accept all the default values throughout the installations.
7 If Microsoft .NET Framework 2.0 is not installed on your computer, you will need to install it using the installation wizard. Click on Next and follow the directions:.
8 .
9 Wireless USB WinDrivers Installation will start automatically..
10 USB Tablet Manager Do not restart! If you mistakenly re start, run the installer again..
11 Power Presenter RE Optional installation: Power Presenter RE is a simple tool that lets you use the pen to markup or annotate any displayed document.
12 DisplayLink Graphic s Adapter Software.
13 After installation of all software, the MirrorBoard Se tup Wizard will request that you restart your PC. Click on Restart to comply. A gray icon will appear in the Windows syst em tray (lower right of the desktop). In Windows 7, you may have to click on the up arrow to show all icons.
14 Windows 7: Click the icon and choose “Advanced Configuration.” Set “Multiple displays” to “Duplicate these displays.” Click “Apply.” Please note that your computer display may adjust. The MirrorBoard automatically sets both the MirrorBoard and the computer display to a common resolution.
15 Calibrate the Pen The pen must be calibrated prior to first use. Click the Pen Pad icon and choose “Calibrati on”. Follow the instructions. Set other pen properties according to your preference. Your MirrorBoard is now ready for first use.
16 Chapter 3 Using MirrorBoard • General Use • Using the Pen • Power Prese nter RE • Touch Buttons • Using the MirrorBoar d with a Projector General Use On/Off Turn on the MirrorBoard by holding the green button on the top left end of the unit for one s econd and then releasing it.
17 Windows 7: Click the icon and choose “Advanced Configuration” or right click on the Desktop and select “Screen resolution”. Set “multiple displays” to “Duplicate these displays.” Click “Apply.” Please note that your computer display may adjust.
18 Power Presenter RE Power Presenter RE is a simple tool to use the pen to markup or annotate any document displayed. NOTE: Power Presenter RE only works when MirrorBoard is connected to the computer.
19 .
20 For additional information, refer to the Power Presenter RE Manual: Start>Program Files> Power Prese nter RE> Manual.
21 Touch Buttons MirrorBoard has seven touch buttons on the front panel . Activate these buttons with your fingers – Do not the pen. 1 2 3 4 5 6 7 1) ESC: Allows you to exit current function.
22 If MirrorBoard does not show the complete desktop, set the computer’s resolution to 800 by 600. (Right click on desktop, select Properties, Settings tab). Windows 7: Make sure that your MirrorBoard is powered on and connec ted wirelessly to the computer.
23 Next, click on Screen 2 (Projector), and in the Multiple Displays section, select "Duplicate Displays 2 and 3". Click Apply. Next, select the display that says 2|3. Check the "Make This My Main Display" box, and click Apply.
24 Chapter 4 Troubleshooting & FAQ’s MirrorBoard is showing the desktop backg round, but not the icons or Start Menu : MirrorBoard has to be set to “Mirror” mode to show the desktop. Select the DisplayLink icon in your system tray, and select “Mirror” from the list.
25 Appendix Optoma Global Offices For service or support pleas e contact your local office. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com serv ices@optoma.com Cana da 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www.
26 Precautions Do not use MirrorBoard near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the product to rain or moisture. Clean only with dry cloth. Only use attachments/accessories specified by the manufacturer.
An important point after buying a device Optoma Technology Q300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Optoma Technology Q300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Optoma Technology Q300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Optoma Technology Q300 you will learn all the available features of the product, as well as information on its operation. The information that you get Optoma Technology Q300 will certainly help you make a decision on the purchase.
If you already are a holder of Optoma Technology Q300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Optoma Technology Q300.
However, one of the most important roles played by the user manual is to help in solving problems with Optoma Technology Q300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Optoma Technology Q300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
