Instruction/ maintenance manual of the product TA-6711 Onkyo
Go to page of 16
1 T A-671 1 Ster eo Cassette T ape Deck CONTENTS Features ................................................ 2 Important Safeguards ........................... 3 Precautions .......................................... 3 Control Position and Names .......
2 FOR CANADIAN MODEL:(POUR LE MODELE CANADIEN:) • For models having a power cord with a polarized plug CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
3 Precautions 1. Read Instructions — All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions — The safety and operating instructions should be retained for future reference. 3. Heed Warnings — All warnings on the appliance and in the operating instructions should be adhered to.
4 Control Positions and Names If there is a protective film on the surface of the display which makes it difficult to read, remove it. For more information about a button or control, turn to the page number listed in square brackets [ ]. Front Panel 1.
5 System Connections • Do not plug in the power cord until all connections have been made. • On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left channel. Also refer to the amplifier's instruction manual for further information on connections.
6 Playing T apes Listening to a Tape 1. Press the EJECT button to open the cassette holder. 2. Insert a cassette. • The portion of the cassette where the tape is exposed sholud be facing downward and the side you wish to play facing outward. 3. Close the cassette holder.
7.
8 Real T ime Counter 1 2 3 C-46 C-50 C-60 C-64 C-120 C-70 C-74 C-90 C-100 C-54 Determining the Elapsed Tape Running Time (ELAPSED) The counter reads [0:00] "ELAPSED'' when the power is first turned on. 1. Insert a cassette. 2. Press the T-SIZE button to set the size of the cassette to be used.
9 Determining the Remaining Tape Running Time (REMAIN) The Real Time Counter can also be used to show the amount of time remaining on a cassette as it is being recorded or played back. 1. Insert a cassette. 2. Set the proper length using the T-SIZE button.
10 Recording If recording does not begin even when the steps listed below are followed: • Check to see if one or both of the cassette's erasure prevention tabs have been broken off. • Confirm that the cassette deck is properly connected to the amplifier and other components in the system.
11 8. While observing the peak level indicators, adjust the recording level and balance as appropri- ate. • Adjust the REC BALANCE knob so that the level of the left and right channels is approximately the same. • Use the REC LEVEL knob to adjust the recording level.
12 Making Good Sounding Recordings Dolby Noise Reduction Systems Dolby B NR is the system used in most cassette tape decks to reduce the background noise that is inherent in all cassette tapes.
13 Useful Functions TAPE MONITOR TAPE MONITOR Connecting Microphone(s) • For stereo recording, connect two micro- phones to the L (MONO) and R MIC jacks. • For monaural recording, connect the microphone to the L (MONO) jack. Notes: • Be sure to set the REC LEVEL knob at the lowest recording level before connecting microphone(s).
14 Examine cassette tapes carefully before using them with the TA-6711. A AB Erasure Prevention Cassette tapes are constructed with erasure prevention niches on the back edge that are initially covered by break-off tabs. 1. If you wish to protect a recording from accidental erasure, break off the tab(s) of the appropriate side(s).
15 T roubleshooting Guide • No power. Cause: Power cord plug is loose Remedy: Insert plug properly into outlet. • Playback but no sound. Cause: Hookup incorrect. Remedy: Check and hook up correctly according to page 5. Cause: Stereo amplifier input selector switch is set to wrong position.
2 E SN29342245 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572, JAPAN Tel: 0720-31-8111 Fax: 0720-33-5222 ONKYO U.S.A. CORPORATION 200 Williams Drive, Ramsey, N.
An important point after buying a device Onkyo TA-6711 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo TA-6711 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo TA-6711 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo TA-6711 you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo TA-6711 will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo TA-6711, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo TA-6711.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo TA-6711. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo TA-6711 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
