Instruction/ maintenance manual of the product iConverter GX/X Omnitron Systems Technology
Go to page of 2
ABOUT THIS MANUAL This document supports revision “xx/10” of the GX/X. Please refer to the serial number label on the GX/X for the revision number of your product. This revision incorporates the following improvements to the GX/X: 1. Product enhancements now prevent unpredictable behavior under undefined or incompatible DIP-Switch selections.
Any other DIP-Switch configuration will disable Symmetrical Fault Detection mode. NOTE: Converters in SFD mode must be deployed in pairs. Board Mounted DIP-Switch Settings BPAEN BPBEN MAN MAN = = = = Backplane “ A ” Enabled Backplane “B” Enabled P1 Manual P2 Manual AN AN = = Off Off P1 Auto Negotiate P2 Auto Negotiate ON Fig.
An important point after buying a device Omnitron Systems Technology iConverter GX/X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omnitron Systems Technology iConverter GX/X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omnitron Systems Technology iConverter GX/X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omnitron Systems Technology iConverter GX/X you will learn all the available features of the product, as well as information on its operation. The information that you get Omnitron Systems Technology iConverter GX/X will certainly help you make a decision on the purchase.
If you already are a holder of Omnitron Systems Technology iConverter GX/X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omnitron Systems Technology iConverter GX/X.
However, one of the most important roles played by the user manual is to help in solving problems with Omnitron Systems Technology iConverter GX/X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omnitron Systems Technology iConverter GX/X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
