Instruction/ maintenance manual of the product REC-11 Omega Vehicle Security
Go to page of 10
6/02 MO_REC-11/433 COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 2000 This product is designed for professional installation only! REC-11 REMOTE RECEIVER UNIT OWNER'S MANUAL This device complies with FCC Rules part 15.
You received two remote control transmitters to operate your Remote Keyless Entry System. The system LED will flash two times every time the ignition key is turned “on”. This alert will last 90 seconds for the first 48 hours after a new installation.
Transmitter Functions LOCK BUTTON Pressing the LOCK button will lock all of the doors and engage the optional starter interrupt; when held operates “Panic”. GREEN LIGHT Illuminates whenever any transmitter button is pressed. III BUTTON Pressing the III button for two seconds can be used to activate the 3rd Channel Output.
Page 4 Concealed Transmitter Codes: Each system includes two transmitters, and up to two additional transmitters can be stored in the unit's memory for your convenience. Each transmitter has its own unique code. Thus, no other transmitter is coded the same as yours.
Page 5 LED Off ...................................................................... Ignition switch is "On" OR the system is "at rest", indicating that no automatic features will occur. LED On Solid Red ..........................
Page 6 turned "off" as a reminder. Single beeps will also accompany the engagement of automatic locking and starter interrupt circuit engagement.
Page 7 The Valet Switch is used to place the system into Valet Mode, which is used to stop or interrupt any optional automatic functions, such as Starter Disable, which may be programmed to operate.
Page 8 Step 1. Enter the vehicle normally. Step 2. Using your key, turn "on" the ignition. Be prepared to perform the following Step before 5 seconds expires. Step 3. Within 5 seconds, press and release the Valet Switch*. The system will be immediately overridden.
Page 9 Programming Transmitters Programming Transmitters To Operate Your System: To use an additional or replacement transmitter, it's unique digital code must first be added to the control module's memory.
Page 10 6) Repeat Step 5 within 10 seconds for each additional transmitter. As each transmitter is learned, the buzzer will sound, which is then followed by beeps indicating the number of the transmitters learned.
An important point after buying a device Omega Vehicle Security REC-11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega Vehicle Security REC-11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega Vehicle Security REC-11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega Vehicle Security REC-11 you will learn all the available features of the product, as well as information on its operation. The information that you get Omega Vehicle Security REC-11 will certainly help you make a decision on the purchase.
If you already are a holder of Omega Vehicle Security REC-11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega Vehicle Security REC-11.
However, one of the most important roles played by the user manual is to help in solving problems with Omega Vehicle Security REC-11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega Vehicle Security REC-11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
