Instruction/ maintenance manual of the product DPC10-CS Omega Engineering
Go to page of 6
kD Voltage Thresholds: Low 0 to 0.4 V dc High 2.0 to 28 V dc Maximum High 28 V dc PROGRAM ENABLE INPUT (Terminal 5) Operation: Level sensitive (maintained) COUNT ACCURACY Absolute when operated within specifications. DPCl O-CC Inputs A & B are designed for contact closures to dc common.
+0.4 V dc or less. Counts are entered on the negative-going edge of the pulse. Page 2 +3 V dc. The sensor must be capable of sinking current from the input to bring the input voltage down to +28 V dc to the input. Counts are entered on the positive-going edge of the pulse.
m key. Repeat this process until all digits are set correctly. them key to move the flashing digit one place to the left. Change this digit to the desired value with the m key will cause the numbers to autoscroll. Next press m key until reaching the desired digit value.
, Page 4 (DPCIO-CS) Count Input Current Sink Input (DPCIO-CC) 4 Reset Connect through Contact Closure to Ground 5 Program Connect to Ground to Enter Enable Program Mode (DPClO-CC) 3 Input A Current So.
Nothinginthismenualmaybereproducedinanymanner,eitherwhollyorinpa~forenypurpose whatsoever without written permission from OMEGA ENGINEERING, INC. Printed in U.S.A. Page 5 Q Copyright 1993 OMEGA ENGINEERING, INC. All rights reserved including illustrations.
@ Laboratory Heaters ENGINEERING INC. One Omega Drive, P.O. Box 4047 Stamford, CT 06907 Tel: (203) 359-1660 Telex: 996404 Cable OMEGA Fax: (203) 359-7700 m Flexible Heaters & Band Heaters fij ’ .
An important point after buying a device Omega Engineering DPC10-CS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega Engineering DPC10-CS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega Engineering DPC10-CS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega Engineering DPC10-CS you will learn all the available features of the product, as well as information on its operation. The information that you get Omega Engineering DPC10-CS will certainly help you make a decision on the purchase.
If you already are a holder of Omega Engineering DPC10-CS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega Engineering DPC10-CS.
However, one of the most important roles played by the user manual is to help in solving problems with Omega Engineering DPC10-CS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega Engineering DPC10-CS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
