Instruction/ maintenance manual of the product CL531 Omega Engineering
Go to page of 10
omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info U ser ’ s Guide CL531 mA Loop Calibrator ® MADE IN Shop online at.
Servicing Nor th America: U.S.A.: One Omega Drive, Box 4047 ISO 9001 Certified Stamford, CT 06907-0047 Tel: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 Bergar Laval (Quebec) H7L 5A1, Canada Tel: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.
1 Basic Keypad Operations 1 1 EZ-Check™ Switch SOURCE mode: Slide th e switch to select from Hi and low range pre- set values and the mid ranger (Dial) is selectable . Dial the mid range value and it will store the value with-in 5 seconds automatically.
2 EZ-Check ™ Switch The EZ-Check™ switch has three positions -- h igh, dial, and low. Its position is shown at the left edg e of the display with “HI ” and “LO” indicators. Neither indicator ind icates the middle position. Use of the EZ-Check™ switch depends on mode.
3 Power and Measure Transmitter Mode The CL531 supplies 15Volts or 24 Volts to th e transmitter and displays the output in mA or % on the CL531 display. In read mode press the EZ-Dial™ Knob twice to get into the featur e options. Then press the EZ-Dial™ Knob to select mA PW R - M.
4 Specifications General Specifications: (Unless otherwise indicate d all specifications are rated from a nominal 23 °C, 70 % RH for 1 year from calibration ) Operating Temperature Range -20 to 60 °.
5 1. Precision Current Meter with accuracy of ±0.025% at 20mA. 2. Precision Current Source with accuracy of ±0.025% at 20mA Place in fresh batteries and allow one hour for the CL531 to stabilize to the ambient temperature. Remove the battery cover and the Phillips head screws.
6 NOTES.
WARRANTY / DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 37 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal three (3) year product warranty to cover handling and shipping time.
Where Do I Find Ever ything I Need for Pr ocess Measurement and Control? OM EGA…Of Course! Shop online at omega.com TEMPERA TURE 䡺 ⻬ Thermocouple, RTD & Thermistor Probes, Connectors, Panels.
An important point after buying a device Omega Engineering CL531 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega Engineering CL531 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega Engineering CL531 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega Engineering CL531 you will learn all the available features of the product, as well as information on its operation. The information that you get Omega Engineering CL531 will certainly help you make a decision on the purchase.
If you already are a holder of Omega Engineering CL531, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega Engineering CL531.
However, one of the most important roles played by the user manual is to help in solving problems with Omega Engineering CL531. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega Engineering CL531 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
