Instruction/ maintenance manual of the product Hard Disk Drive Oki
Go to page of 16
Hard Disk Drive (HDD) Installation Instructions 59393401.
© 2007 by Oki Data Americas, Inc. A ll rights reserved. Document P/N 59383401 Disclaimer Every effor t has been made t o ensure that the information in this document is co mplete, accurate, and up-to-date. The manufacturer assumes no responsi bility for the results of er rors beyond its co ntrol.
3 Installation 1. T urn off the printer and detach the power cord from the back of the printer . 2. Detach the interface cable..
4 3. Open the top cover ..
5 Warning! If the printer has been powered on re cently, the fuser will be hot. This area is clearly labeled. 4. Press the release and open the front cover .
6 5. Loosen the thumbscrew holding the printer side panel in place..
7 6. Lift up on the ends of the side panel, th en remove it from the printer ..
8 7. Slide the access door in the metal plate and open it. 8. R emove the HDD from i ts shipping package. Caution! Observe antistat ic precautions when installing the hard disk drive.
9 9. Plug the connecting cable (1) firmly into the connector (2) on the printer , then tighten the two thumbscrews (3)..
10 10. Close the access cover and slide it to secure it in the metal plate. 11. Replace the side panel on the printer ..
11 12. Use the thumbscrew to secure the panel. 13. Close the front cover ..
12 14. Close the top cover . 15. Attach the interface cable. 16. Plug the power cord into the back and turn on the printer ..
13 Verify the Installation Print the MenuMap 1. Press + one or more times until INFORMA TION MENU appears on the display . 2. Press ENT ER twice. The MenuMap prints.
14 Activate the HDD in the Driver Windows ® Postscript Emulation Driver 1. First Windows Vista a. Click Start → Settings → [Hardware and Sound] Printer . The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Fa x e s .
15 5. Select Installed. 6. Click OK and close the dialog box. PCL Driver 1. First Windows Vista a. Click Start → Settings → [Hardware and Sound] Printer . The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Fa x e s .
16 3. Click Printer → Setup. 4. Click Configure. 5. Select Hard Disk in the Change drop-down menu. 6. Change the setting of the next drop-down menu to Installed. 7. Click OK twice and close Chooser . Mac OS 10.2, 10.3, 10.4 1. First OS 10.2 a. Activate Print Center: Local Hard Drive → Applications → Utilities → Print Center .
An important point after buying a device Oki Hard Disk Drive (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oki Hard Disk Drive yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oki Hard Disk Drive - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oki Hard Disk Drive you will learn all the available features of the product, as well as information on its operation. The information that you get Oki Hard Disk Drive will certainly help you make a decision on the purchase.
If you already are a holder of Oki Hard Disk Drive, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oki Hard Disk Drive.
However, one of the most important roles played by the user manual is to help in solving problems with Oki Hard Disk Drive. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oki Hard Disk Drive along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
