Instruction/ maintenance manual of the product C610 Oki
Go to page of 109
User’s Guide C610/C711 59320301 my .okidata.c om.
2 – C610/C711 User’s Guide Copyright Information Copyright © 2009 by Oki Data. All Rights Reserved C610/C711 User’s Guide P/N 59320301, Revision 1.0 September, 2009 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date.
3 – C610/C711 User’s Guide Emergency First Aid Take care with toner powder: If swallowed, give small amounts of cold water and seek medical attention. DO NOT attempt to induce vomiting. If inhaled, move the person to an open area for fresh air. Seek medical attention.
4 – C610/C711 User’s Guide Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Printer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 C610 Front View . . . . . .
5 – C610/C711 User’s Guide Contents (cont.) Available Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Duplex (two-sided pri nting) Unit . . . . . . . . . . . . . . . . . . . . . . 67 Additional RAM Memory . . . .
6 – C610/C711 User’s Guide Notes, Cautions and Warnings Note: A note appears in this manual like this. A note provides additional information to supplement the main text which may help you to use and understand the product. CAUTION! A caution appears in this manual like this.
7 – C610/C711 User’s Guide Introduction Your printer includes these features: • High Definition Color (HD Co lor), multi-level technology produces more subtle tones and smoother gradations of co.
8 – C610/C711 User’s Guide Printer Overview ________________ C610 Front View *The display langu age can be changed to show English, French, Spanish or Portu uese. 1. Output stacker, face down Standard printed copy delivery point. Holds up to 250 sheets at 80 g/m².
9 – C610/C711 User’s Guide C610 Rear View This view shows the connection pa nel, the rear output stacker and the location of the optional duplex (two-sided printing) unit. * The Network Interface may have a protective “plug” which must be removed before connection can be made.
10 – C610/C711 User’s Guide C711 Front View *The display langu age can be changed to show English, French, Spanish or Portu uese. 1. Output stacker, face down Standard printed copy delivery point. Holds up to 350 sheets at 80g/m². 2. Operator panel Menu driven oper ator controls and LCD* p ane l.
11 – C610/C711 User’s Guide C711 Rear View This view shows the connection pa nel, the rear output stacker and the location of the optional duplex (two-sided printing) unit. * The Network Interface may have a protective “plug” which must be removed before connection can be made.
12 – C610/C711 User’s Guide Changing the Display Language ____ The default language used by yo ur printer for display messages and for report printing is English.
13 – C610/C711 User’s Guide Paper Recommendations Your printer will handle a variety of print media, including a range of paper weights and sizes, transparencies and envelopes. This section provides general advice on choice of media, and explains how to use each type.
14 – C610/C711 User’s Guide Tray 1 and Optional Trays 2 and 3___ Media sizes Media Weight Settings If you have identical paper stock loaded in another tray (2nd or 3rd tray if you have one, or multi pu rpose tray) you can set the printer to automatically switch to the ot her tray when the current tray SIZE DIMENSIONS Letter 8.
15 – C610/C711 User’s Guide runs out of paper. When printing from Windows applications, this function is enabled in the driver settings. When printing from other systems, this function is en abled in the Print Menu. (See “Menu Functions” on page 23 .
16 – C610/C711 User’s Guide Duplex Unit ____________________ This option provides automatic two-sided printing on the same range of paper si zes as tray 2 (i.e. all cassette sizes except A6), using paper stocks from: • C610 : 17-32 lb. US Bond (64-120 g/m²) • C711 : 17-59 lb.
17 – C610/C711 User’s Guide Loading Paper Tray 1 and Optional Trays 2 and 3___ 1. R emove the paper tr ay from the printer . 2. F an the paper to be loaded at the edges (1) and in the middle (2) to ensure that all sheets are properly separated, then tap the edges of the stack on a flat surface to make it flush again (3).
18 – C610/C711 User’s Guide 3. Load paper (letter headed paper face down and top edge towards the front of the printer), as shown. a b b c.
19 – C610/C711 User’s Guide 4. Adjust the rear stopper (a) and paper guides (b) to the size of paper being used. To prevent paper jams: • Do not leave space between the paper and the guides and rear stopper . • Do not overfil l the paper tra y .
20 – C610/C711 User’s Guide capacity is approximately 10 0 sheets of 20-lb. US Bond (75 g/m 2 ) paper. CAUTION! Do not open or close the rear paper exit while printing as it may result in a paper jam.
21 – C610/C711 User’s Guide Multi-Purpose Tray ______________ __________ 1. Open the multi purpose tray (a). 2. F old out the paper supports (b). 3. Press gently down on the paper platform (c) to ensure it is latched down. 4. Load the paper and adjust the paper guides (d) to the siz e of paper being used.
22 – C610/C711 User’s Guide • F or two-sided (duplex) printing on letterhead paper load the paper with pre-printed si de down and top edge away from the printer . (Optional duplex unit must be installed for this function.) • Envelopes should be loaded fa ce up with top edge to the left and short edge into the printer .
23 – C610/C711 User’s Guide Menu Functions This section lists the menus ac cessed via the controls on the printer’s operator panel and displayed in the LCD window.
24 – C610/C711 User’s Guide Operator Panel: _______________ 1. Ready LED ON: Rea d y t o receive data. BLINKING: Processing data. OFF: Offline. 2. Display Displays the printer status and any error messages. 3. Menu Scroll Buttons Enters the Menu mode.
25 – C610/C711 User’s Guide 5. Attention LED ON : A warning occurs. Printing may be possible (e.g low toner). BLINKING : An error occurs. Printing not possible (e.g. toner empty). OFF : Normal condition. 6. Back Button R eturns to the previous higher level menu item.
26 – C610/C711 User’s Guide How to Change the Settings: User ___ It should be noted that many of these settings can be, and often are, overridden by settings in the Windows printer drivers. However, several of the driver settings can be left at “Printer Setting”, which will then default to the settings entered in these printer menus.
27 – C610/C711 User’s Guide How to Change the Settings: Administrator __________________ You can set whether to ENABLE or DIS ABLE each catego ry in the user menu. Disabled categories are not disp layed in the User’s menu. Only a system administrator can change these settings.
28 – C610/C711 User’s Guide Menus ________________________ Configuration Menu ITEM ACTION EXPLANATION Tr a y Count Tr a y 1 Tr a y 2 * Tr a y 3 * MP T ray *Note: Only av ailable when optional tra ys are present Select an item to display the total number of pages p rinted from the relevant tr ay .
29 – C610/C711 User’s Guide Print Information Menu This menu provides a quick method of listing various items stored within the printer. Sys te m Serial Number Asset Number Lot Number CU V ersion PU V ersion To t a l M e m o r y Flash Memory SD Card Date and Ti me Displays information for these items.
30 – C610/C711 User’s Guide Shutdown Menu This item should always be selected before switching the printer off, to ensure that no data is lost. EPSON FX F ont List Execute Scroll down to this parameter and select execute to print out an Epson FX emulation font list.
31 – C610/C711 User’s Guide Print Secure Job Menu Note: This menu only displays if the optional SD card is installed or on a C610hdn with a hard disk drive installed. ITEM ACTION EXPLANATION Encrypted Job Not F ound Print Delete Used for printing an encrypted authentication print job (Encrypted Job) stored in the SD card.
32 – C610/C711 User’s Guide Stored Job Not F ound Print Delete Used to print out a stored job in the SD card. Not Found will be displayed where a file, which could be printed is not available. The following message will appear if a printable file is av ailable.
33 – C610/C711 User’s Guide Menus Menu ITEM ACTION EXPLANATIO N Tr a y Configuration Paper feed Default: Tray 1 Select tray . Select by scroll and Enter button. Auto T r ay Switch Default: On Switches Auto ON/OFF . Select by scroll and Enter button.
34 – C610/C711 User’s Guide Tray Configuration (cont.) MP T r ay Config Paper Size: •A 4 / A 5 / A 6 / B 5 • Legal14/ Legal 13.5/ Legal13 • Letter • Exec uti ve •C u s t o m •C o m - 9.
35 – C610/C711 User’s Guide Tr a y 2 C o n f i g Tr a y 3 C o n f i g Note: only present if option installed System Adjust Pow e r S av e Ti m e Default: 30 Select from 1/2/3/ 4/5/10/15/ 30/60/12 0/180 Minutes . Select by scroll and Enter button. Sleep Time Default: 10 Select from 1/2/3/ 4/5/10/15/ 30/60/12 0/180 Minutes .
36 – C610/C711 User’s Guide System Adjust (cont.) Paper Black Setting –2/–1/0/+1/+2 Default: 0 Used for fine adjustment of the black print on paper . Paper color Setting –2/–1/0/+1/+2 Default: 0 Used for fine adjustment of the color print on paper .
37 – C610/C711 User’s Guide Admin Setup ITEM SETTINGS EXPLANATION Enter Password xxxxxxxxxxxx Enter a password to gain entry to the Admin Setup menu. Password should be from 6 to 12 digits of alpha/numeric characters (or mix) The default value is "aaaaaa" Network Setup TCP / IP Enable Disable Sets TCP/IP Protocol.
38 – C610/C711 User’s Guide Network Setup (cont.) NetW are Enable Disable Sets Enable/Disable of NetW are Protocol. EtherT alk Enable Disable Sets Enable/Disable of EtherT alk Protocol. Frame T ype Auto 802.2 802.3 Ethernet II SNAP Sets the frame type.
39 – C610/C711 User’s Guide Network Setup (cont.) Te l n e t Enable Disable Sets Enable/Disable of T elnet. Enable: T elnet is available. Disable: T elnet is not available. Display Condition:T CP/IP should be enabled. FTP Enable Disable Sets Enable/Disable of FTP .
40 – C610/C711 User’s Guide Network Setup (cont.) Fa c t o r y Defaults? Execute Specifies whether to initialize the network factory default settings for the Network. Print Setup P ersonality Auto Pos t S cr i pt PCL XPS IBM PPR EPSON FX Selects a printer language.
41 – C610/C711 User’s Guide Print Setup (cont.) To n e r S a v e Mode On/ Off This function works effectively only if the data input is color RGB data. This setting is valid in PS and PCL, but does not take effect in the following cases. (1) PS: If Color Matching is set OFF .
42 – C610/C711 User’s Guide Print Setup (cont.) Edit Size Cassette Size/ A4/A5/A6/B5/ Legal14/ Legal13.5/ Legal13/Letter/ Executive/ Custom/Com-9 Envelope/Com- 10 Env elope/ Monarch Envelope/DL En.
43 – C610/C711 User’s Guide PS Setup (cont.) USB Protocol ASCII/ RAW Specifies PS communication protocol mode of data from USB port. (In RAW mode, Ctrl- T is inv alid). PS models only . PCL Setup F ont Source Resident Specifies the location of PCL default font.
44 – C610/C711 User’s Guide PCL Setup (cont.) A4 Print Width 78 column 80 column Sets the number of char acters for A4 paper . Auto LF . This is for 10-CPI characters when Auto CR/LF Mode is set to OFF . This menu is enabled only when A4 paper is selected in the menu that sets the print width of A4 paper in portrait orientation.
45 – C610/C711 User’s Guide PCL Setup (cont.) White Page Skip On/ Off Sets whether to eject a page without any data to print (blank page) upon reception of FF command (OCH) in PCL Mode. OFF: Ejecting. CR Function CR /CR+LF Sets action when CR code is received in PCL.
46 – C610/C711 User’s Guide PCL Setup (cont.) Pe n W i d th Adjust On /Off When minimum width is specified in PCL, sometimes a 1- dot line, looks broke n. With PEN WIDTH Adjust set to ON, when the minimum width is specified, the line width will be emphasized so as to look wider than a 1-dot line.
47 – C610/C711 User’s Guide IBM PPR Setup (cont.) Sym bo l S et IBM 437 Sets the Symbol Set for IBM PPR (see machine ope rator panel for complete list). Letter O Style Enable/ Disable Specifies the sty le that replaces ø (9B) and ¥ (9D) with ø (ou) and Ø (zero).
48 – C610/C711 User’s Guide EPSON FX Setup Character Pitch 10 CPI/ 12 CPI/ 17 CPI 20 CPI/ Proportional Specifies character pitch in Epson FX emulation. Character Set SET-2 SET -1 Sets a character set. Sym bo l S et IBM 437 Sets the Symbol Set for Epson FX Emulation.
49 – C610/C711 User’s Guide Color Setup Ink Simulation Off SWOP Euroscale Japan The machine has its own process simulation engine which simulates standard colors in the printer . This function is available only with PS language jobs. UCR Low Medium High Selects limitation to the toner layer thickness.
50 – C610/C711 User’s Guide Memory Setup Re c ei v e Buffer Size Auto 0.5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte 32 megabyte Sets the size of receive buffer R esource Save Auto Off 0.5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte 32 megabyte Sets the size of resource saving area.
51 – C610/C711 User’s Guide SD Card Setup This item is displayed only if the SD card (option) is installed . Initialize Execute Initializes the SD Card to the factory default setting. Machine performs partition- division, and initializes each partition.
52 – C610/C711 User’s Guide SD Card Setup (cont.) Re s iz e P artition PCL nn%/ Common mm%/ PSll%/<Apply> Specifies the size of partition. Specifies a size by ratio to the whole SD Card in % (1% unit).
53 – C610/C711 User’s Guide SD Card Setup (cont.) Fo rm a t P artition PCL Common PS Formats a specified partition. When the Enter button is pressed, the follo wing confirmation message appears. Are You Sure? Yes/ No No = return to the previous menu.
54 – C610/C711 User’s Guide Time Setup Date Fo rm a t mm/dd/yyyy dd/mm/yyyy yyyy/mm/dd Set desired date format. Time Z one –12:00 ~ 0:00 ~ +13:00 Enter the time zone for your country in relation to GMT .
55 – C610/C711 User’s Guide Settings Re s e t Settings Execute Res et s EE P RO M o f C U. Re s et s User menu to the factory default. If Execute is selected, exits from the menu.
56 – C610/C711 User’s Guide Calibration ITEM SETTINGS EXPLANATION Auto Density Mode On /Off Selects whether density adjustment and TRC compensation is automatically performed. On: Density adjustment is automatically run under the engine-specified conditions, and reflected in TRC compensation.
57 – C610/C711 User’s Guide Boot Menu This menu should only be changed by the System Administrators. In order to gain access to this menu, follow the instructions in “How to Ch ange the Settings: Administrator” on page 27 . This menu is in English only (default setti ngs in bold type).
58 – C610/C711 User’s Guide Bi-Direction Enable / Disable ENABLE/DISAB LE the bi-directional capability of the parallel interface. ECP Enable / Disable Extended Capabilities Port, enables/disables this function. Ack Width Narrow / Medium/ Wide Sets ACK width for compatible reception.
59 – C610/C711 User’s Guide USB Setup This menu controls the operat ion of the printer’s USB data interface. When you have changed any settings in the USB Menu, turn the printer OFF , then ON again. ITEM SETTINGS EXPLANATION USB Enable / Disable ENABLES / DISABLES the USB port.
60 – C610/C711 User’s Guide Security Setup Note: This menu only displays if the optional SD card is installed. ITEM SETTINGS EXPLANATION Job Limitations Off Encrypted Job Job limitation mode control. Jobs other than specified ones are rejected. Make Secure SD Card Execute Enables SD Card encoding function.
61 – C610/C711 User’s Guide Make Cipher Ke y Execute R esets a cipher key to be used on an encrypted SD card . When this processing is done, all data stored on the SD card cannot be restored. After execution, the following confirmation messages will appear .
62 – C610/C711 User’s Guide Storage Setup Note: This menu only displays if the optional SD card is installed. ITEM SETTINGS EXPLANATION Check File Sys te m Execute R esolves mismatch between actual memory and displayed memory av ailable in a file system.
63 – C610/C711 User’s Guide Enable initialization No Ye s Prevents a setting change accompanying initialization of Block Device (SD Card, FLASH). ITEM SETTINGS EXPLANATION.
64 – C610/C711 User’s Guide Power Setup Language Setup ITEM SETTINGS EXPLANATION Pea k Pow e r Control Normal Low Sets P eak Power Control level. Pow e r S av e Enable Disable Sets Enable/Disable of Power Sa ve Mode. Sleep Enable Disable Sets Enable/Disable of Sleep Mode.
65 – C610/C711 User’s Guide Print Statistics ITEM SETTINGS EXPLANATION Enter Passwo rd XXXX Enters a password to enter Print Statistics menu. The default value is "0000". The password for entry to Print Statistics is different from the password for entry to Functions-Admin Setup.
66 – C610/C711 User’s Guide Res et G r o u p Counter Execute Resets the group counter . When it executes, the following message appears. Are You Sure? Yes / No When No is selected, it returns to original menu indication. When Yes is selected, the group counter zero is cleared, the menu is passed through.
67 – C610/C711 User’s Guide Available Options See the instructions supplied with the options. Duplex (two-sided printing) Unit ___ Oki P/N 70061601 The duplex unit adds the function of two-sided printing, using less paper and making large documents easier to handle.
68 – C610/C711 User’s Guide SD Card _______________________ Oki P/N 70061701 The optional SD card enables coll ating of printed pages and can be used to store overlays and mac ros, fonts, and s ecure or proof documents waiting to be printed. Installation takes a few minutes, a nd requires a medium size cross-head (philips type) screwdriver.
69 – C610/C711 User’s Guide Troubleshooting Provided that you follow the recommendations in this guide on the use of print media, and you keep the media in good condition prior to use, your printer should give years of reliable service. However, paper jams occasionally do occur, and this section explains how to clear them quickly and simply.
70 – C610/C711 User’s Guide Major Printer Components and Paper Path 1. Duplex unit (if fitt ed). 6. Operator panel. 2. Face-up stacker. 7. Front cover. 3. Paper exit. 8. Paper tray. 4. Fuser unit 9. Addition al paper tray (if fitted) 5. Top cover.
71 – C610/C711 User’s Guide Paper Sensor Error Codes _________ * If fitted. CODE # LOCATION CODE # LOCATIO N 370 Duplex unit * 382 Paper exit 371 Duplex unit * 383 Duplex unit * 372 Duplex unit * .
72 – C610/C711 User’s Guide Clearing Paper Jams 1. If a sheet is well advanced out of the top of the printer , simply grip it and pull gently to dr aw it fully out. If it does not remove easily , do not use excessive force. It can be removed from the rear later .
73 – C610/C711 User’s Guide 3. Note the positions of the four toner cartridges (a) and image drums (b). It is essential that they go back in the sa me order . It will be necessary to remove the four image drums to gain access to the paper path. 4.
74 – C610/C711 User’s Guide 5. Put t he assembly down gently onto a piece of paper to prevent toner from marking yo ur furniture and to avoid damaging the green drum surface, and cover . 6. R epeat this remov al procedure for each of the remaining image drum units.
75 – C610/C711 User’s Guide 7. Look into the printer to check whether any sheets of paper are visible on any part of the belt unit. • T o remove a sheet with its leading edge at the front of the belt (a), carefully li ft the sheet from the belt and pull it forwards into the internal drum cavity and withdraw the sheet.
76 – C610/C711 User’s Guide • T o remove a sheet from the centr al area of the belt (b), carefully separate the shee t from the belt surface and withdraw the sheet.
77 – C610/C711 User’s Guide (a) To remove a sheet i n the fu ser; push the two retaining levers (e) towards the rear of the printer to release the fuser. With draw the fus er unit using the h andle (f). Press release lever (g) and pull the trap ped paper from the fuser.
78 – C610/C711 User’s Guide (b) Replace fuse r unit into the mach ine and move lockin g levers (e) toward the rear of the machine. e.
79 – C610/C711 User’s Guide 8. Starting with the cy an image drum unit nearest th e fuser , replace the four image drums into t he drum cavity , making sure to locate them in the correct order .
80 – C610/C711 User’s Guide 9. Lower the top cover but do not press down to latch it closed yet. This will protect the drum s from excessive exposure to room lighting while you check the remaining areas for jammed sheets. 10. Open the re ar exit tray (h) and check for a sheet of paper in the rear path area (i).
81 – C610/C711 User’s Guide 12. If a duplex unit is fitted, lift lever (j) and lower the duplex unit cover and pull out any sheets found in t his area. Close the duplex unit cove r 13. Pull down the MP T ray using th e depressions. Lift the front cover release lev er and lower the front cov er .
82 – C610/C711 User’s Guide 15. Pull out the paper tray and ensu re that all paper is stacked properly , is undamaged, and that the paper guides are properly positioned against the edges of the paper stack. When satisfied, replace the tr ay . 16. Finally , close the top cover and press down firmly so that the cover latches closed.
83 – C610/C711 User’s Guide Replacing Consumables and Maintenance Items Order Information ______________ Only use genuine Oki Original products to ensure the best quality and performance from your hardware. Non Oki Original products may adversely affect your printer's performance and invalidate your warranty.
84 – C610/C711 User’s Guide Toner Cartridge Replacement _____ Have a sheet of paper handy so that you have somewhere to place the used cartridge while yo u install the new one. Dispose of the old cartridge responsibly, inside the pack that the new one came in.
85 – C610/C711 User’s Guide 1. Press the cover release and op en the printer’s top cov er fully . 2. Note the positions of the four cartridges. WARNING If the printer has been po wered on, the fuser may be hot. This area is clearly labelled. Do not touch.
86 – C610/C711 User’s Guide (a) Pull the colored toner release lever on the cartridge to be replaced fully towards th e front of the printer. (b) Lift the right-hand end of the cartridge and then draw the cartridge to the right to release the left-hand end as shown, and withdraw the toner cartridge out of the printer.
87 – C610/C711 User’s Guide 5. R emove the new cartridge from its box but leave its wr apping material in place for the moment. 6. Gently shake the new cartridge from end to end sever al times to loosen and distribute the toner evenly inside the cartridge.
88 – C610/C711 User’s Guide 9. Insert the left end of the cart ridge into the top of the image drum unit first, pushing it ag ainst the spring on the drum unit, then lower the right end of the cartridge down onto the image drum unit.
89 – C610/C711 User’s Guide 11. Gently wipe the LED head surface with a clean, lint free cloth. 12. Finally , close the top cover and press down firmly at both sides so that the cover latches closed.
90 – C610/C711 User’s Guide Image Drum Replacement. ________ The printer contains four image drums: cyan, magenta, yellow and black. 1. Press the cover release and op en the printer’s top cov er fully . CAUTION! Static sensitive devices, handle with care.
91 – C610/C711 User’s Guide 2. Note the positions of the four toner cartridges (a) and image drums (b). It is essential that they go back in the sa me order .
92 – C610/C711 User’s Guide 3. Holding it by its top centre, lift the image drum, complete with its toner cartridge, up and out of the printer . 4. Put the assembly down gently onto a piece of paper to prevent toner from marking yo ur furniture and to avoid damaging the green drum surface.
93 – C610/C711 User’s Guide 5. With the colored toner release lever (1) to the right, pull the lever towa rds you. This will release the bond between the toner cartridge and the image drum unit.
94 – C610/C711 User’s Guide 8. Place the toner cartridge onto the new image drum cartridge as shown. Push the lef t end in first, and then lower the right end in. (It is not necessa ry to fi t a new toner cartridge at this time unless the remaining toner level is v ery low .
95 – C610/C711 User’s Guide 10. Holding the complete assembly by its top center , lower it into place in the printer , locating the pegs at each end into their slots in the sides of the printer cavity . 11. Finally , close the top cover and press down firmly at both sides so that the cover latches closed.
96 – C610/C711 User’s Guide Replacing the Transfer Belt Unit ____ The belt unit is located under the four image drums. Switch off the printer and allow the fuser to cool for about 10 minutes before opening the cover. 1. Press the cover release and op en the printer’s top cov er fully .
97 – C610/C711 User’s Guide 3. Lift each of the image drum uni ts out of the printer and place them in a safe place aw ay from di rect sources of heat and light. CAUTION! The green image d rum surface at the ba se of each cartridge is very delicate and light sensitive.
98 – C610/C711 User’s Guide 4. Locate the two fasteners (a) at each side of the belt and the lifting bar (b) at the front end. 5. T urn the two fasteners 90° to the left.
99 – C610/C711 User’s Guide 7. Lower the new belt unit into place, with the lifting bar at the front and the drive gear tow ard s the rear of the printer . Locate the drive gear into the gear inside the printer by the rear left corner of the unit, and lower the belt unit flat inside the printer .
100 – C610/C711 User’s Guide 8. T urn the two fa steners (a) 90° to the right until they lock. This will secure the belt unit in place. 9. R eplace the four image drums, complete with their toner cartridges, into the printer in the same sequence as they came out: cyan (nearest the rear), magenta, yellow and black (nearest the fron t).
101 – C610/C711 User’s Guide Fuser Replacement ______________ The fuser is located inside the pr inter just behind the four image drum units. 1. Press the cover release and op en the printer’s top cov er fully . 2. Identify the fuser handle ( a ) on the top of the fuser unit.
102 – C610/C711 User’s Guide 3. Pull the two fuser retaining levers (b) tow ards the front of the printer so that they are fully upright. 4. Holding the fuser by its handle (a), lift the fuser straight up and out of the printer . If the fuser is still w arm, place it on a flat surface which will not be damaged by heat.
103 – C610/C711 User’s Guide 8. Push the two retaining levers (b) tow ards the rear of the printer to lock the fuser in place. 9. Finally , close the top cover and press down firmly at both sides so that the cover latches closed.
104 – C610/C711 User’s Guide Cleaning the LED Head ___________ Clean the LED heads when printing does not come out clearly, ha s white lines or when text is blurred. There is no need to switch off the printer to clean the lens. 1. Press the cover release and op en the printer’s top cov er fully .
105 – C610/C711 User’s Guide 3. Gently wipe the LED head surfac e with a clean, lint free cloth. 4. Close the top cover and press down firmly at both sides so that the cover latches closed. CAUTION! Do not use methyl alcohol or other solvents on the LED head as damage to the lens surface will occur.
106 – C610/C711 User’s Guide Utilities Summary of Utilities Provided ________ Utilities on the CD For more information, click “Tell me more” on the Optional Utilities screen. Windows • Admin Manager F or quick discovery and setup of the Oki network card in your printer .
107 – C610/C711 User’s Guide Download PCL macros, P ostscript forms and bar codes to the printer hard disk dr ive for use in print jobs • Swatch Utility Print a color swat ch and use the indicated RGB v alues to set up the color(s) of your choice in y our graphics/design software application.
108 – C610/C711 User’s Guide • PS Gamma Adjuster P ermits adjustment of each o f the primary colors that the printer uses in P ostscript mode. Installing the Utilities ____________ Utilities on th e CD Load the utilities from the Menu Installer located on the CD supplied with your printer.
109 – C610/C711 User’s Guide Specifications Specifications are subject to change without notice. ITEM SPECIFICATION Dimensions C610: 17.1” W x 21.5” D x 13.4 ” H (435 x 547 x 340 mm) without Duplex unit C711: 17.1” W x 21.5” D x 15.3 ” H (435 x 547 x 389 mm) without duplex unit We i g h t C610: 57.
An important point after buying a device Oki C610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oki C610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oki C610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oki C610 you will learn all the available features of the product, as well as information on its operation. The information that you get Oki C610 will certainly help you make a decision on the purchase.
If you already are a holder of Oki C610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oki C610.
However, one of the most important roles played by the user manual is to help in solving problems with Oki C610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oki C610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
