Instruction/ maintenance manual of the product 6300 Oki
Go to page of 32
.
2 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control.
Cont ents 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Storable Font Formats . . . . .
4 Introduction Introduction Important! Your printer’s firmware must be version 1.0.52 or higher for the CompactFlash to work properly. To determine the firmware version you have, print the System Setting s list: 1. Pre ss the < MENU > button to enter the printer menu 2.
5 Introduction Features • Use custom fonts and forms for documents printed from legacy system s. • Apply overlays for invoices, shipping tickets and other documents in non-Windows environments. • Manage and modify font lists and forms across multiple printers.
6 Installing the Compa ctFlash Installing the CompactFlash Careful! To protect the CompactFlash, please keep it in its packaging until you're ready to install it. 1. Before continuing: a. T urn off the printer . b. R emove the power cord. c. R emove the interface cable.
7 Installing the Compa ctFlash 3. Remove the right side cov er: a. Slide the cover toward the rear of the printer . b. Slide the cov er down to remo ve it.
8 Installing the Compa ctFlash 4. Remove the bracket: a. Loosen the two scre ws at the top. b. Pull up to remove. 5. Unfasten and swing out the re taining strap ( 1 ).
9 Installing the Compa ctFlash Alert! To be on the safe side, please grou nd you rself (t ouch m etal) before handling the CompactFlash. 6. Remove the CompactFlash from its packaging and insert it in the slot. 7. Refasten the retaining strap. TJ169a.jpg TJ170.
10 Installing the Compa ctFlash 8. Replace the metal bracket: a. Slide it down into the printer . b. Tighten the two screws at the top. TJ158a_crop.jpg.
11 Installing the Compa ctFlash 9. Reinstall the right side cover: a. Slide the tabs on the top of the c over into the channel on the printer . b. Fit the tabs at the bottom of the cover into the printer . c. Slide the cover firmly towards the front of the printer .
12 Installing the Compa ctFlash 10. Finish the installation: a. Reattach the interface cord. b. Reattach the power cable . c. T urn on the printer . 11. Generate a “S ystem Settings List” report t o confirm proper installation: a. Press the < MENU > button to enter the printer menu b.
13 Downloadin g Fonts and Form s Downloading Fonts and Forms The Font and Form Downloader Utility Use the Font and F orm D ownloader utility to download PCL fonts and forms. Note: To download PostScript forms, use OkiWebRemote: see page 23. Installing the Utility 1.
14 Downloadin g Fonts and Form s Running the Utility Click [Start] → [Progr ams] → [Okidata] → [F ont and Form Downloader] → [Font and Form Downloader: ] Make sure the printer is discovered and appears in the [Select a printer] box.
15 Downloadin g Fonts and Form s Using the Utilit y: PCL Fonts Downloading Fonts 1. Open the Font and F orm Downloader utility . 2. Click [Add to List]. The Open window appears . 3. Browse to the folder where the font you wish to download is located. 4.
16 Downloadin g Fonts and Form s 5. Click the font you wish to download, then click [Open]. The Add to list w indow appears . 6. Select [Download as PCL5 font]. a. Enter the name under which you wish to store the font. b. Enter the Control ID y ou wish to use for the font.
17 Downloadin g Fonts and Form s 8. When you are done selecting fonts, click the printer name in the [Select a printer] box. Note: If you wish to hav e the printer automatically print out a sample of the fonts, select [Print] under [Print font sample].
18 Downloadin g Fonts and Form s Using the Utility: PCL Forms (Macros / Overlays) Downloading PCL Forms 1. Open the Font and F orm Downloader utility . 2. Click [Add to List]. The Open window appears . 3. Browse to the folder where the form you wish to download is located.
19 Downloadin g Fonts and Form s b. Enter the Control ID you wish to use for the form. Keep a record of the Control ID you set for future reference . 7. Click [OK]. The utility returns to the main screen with the f orm you selected now listed in the box : 8.
20 Downloadin g Fonts and Form s 1. Click [T est Form]. The Test Form dialog box appears . 2. Enter the Control ID number for the form you wish to print, then click [Print]. The form prints . Deleting D ownloaded Forms T o delete all fonts and forms, see “D eleting Downloaded Fonts (and Forms)” on page 17.
21 Downloadin g Fonts and Form s Oki WebRemote Note: Use of the CompactFlash with OkiW ebRemote requires a web b rowser such as Microsoft Internet Explorer ® version 5.5 and higher, or Netscape ® version 6.2 and higher. The OkiW ebRemote w eb page is buil t into y our printer .
22 Downloadin g Fonts and Form s 3. Click [Login]. The “Connect to” screen appears. a. T ype “root ” as the [User name] (be sure to use all lower case letters ). b. T ype the last six digits of the Mac address (without the colons ) for the [Password].
23 Downloadin g Fonts and Form s Deleting D ownloaded Fonts 1. In the left column on the Maintenance tab, click [Font Maintenance] → [Font Listings]. 2. Hi ghlight the font to be deleted. 3. Click [Dele te]. 4. Repeat the process for each font y ou wish to delete.
24 Generating a Lists of Fonts Generating a Lists of Fonts T o generate a list of the downloaded fonts stored on the CompactFlash, including the escape sequence for each font: 1.
25 Printing Using Fonts and Forms Printing Using Fonts and Forms Using Downloaded Fonts The B6200n and B6 300n CompactFlash cards support fonts of many types. Important! The examples below are provid ed to help guide you through the pr ocess of using commands to employ downloaded fonts and forms in printed documents.
26 Printing Using Fonts and Forms Selecting Fonts by FontID Commands used: Command ASCII Hexadeci mal Assign FontID <ESC> * c # D 1B 2A 63 # 44 Assign FontID to F ontFile in storage < ESC> & n # W [01] 1B 26 6E # 57 [01] Select primary fo nt by FontID <ESC> ( # X 1B 28 # 58 Example T o select downloaded fonts Font1.
27 Printing Using Fonts and Forms Switching Fonts Set a Primary and Secondary Font F or PCL5, you can set one Primary and one Secondary font, then use the SI and SO commands to switch between them.
28 Printing Using Fonts and Forms Set the Font as the Primary Font Each Time You Switch If you prefer , you can set the font you wish to use as the Primary font each time you call it up in the program.
29 Printing Using Fonts and Forms Using Resident Bar Code Fonts Available Bar Code Fonts Select Barcode Font by Font Attribute Use the escape sequence to select barcode fonts. Bar Code Escape Sequen ce Interleaved 2 of 5 <ESC> ( 4 Y <ESC> ( s SIZE a v 64 T a.
30 Printing Using Fonts and Forms Using Forms (Macros / Overlays) Important! The examples below are provid ed to help guide you through the pr ocess of using commands to employ downloaded fonts and forms in printed documents. Using commands requires experience with PCL5 programming language and an understanding of embedding the commands.
31 Printing Using Fonts and Forms Example • The form file name is hello70. prn. It has been stored on the CompactFlash using Control ID = 2. • The print job file name is hello71.
Oki Data Amer icas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Phone: (800) 654-3282 FAX: (856) 222-5320 WWW .OKIPRINTINGSOLUTIONS.COM 59367201.
An important point after buying a device Oki 6300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oki 6300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oki 6300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oki 6300 you will learn all the available features of the product, as well as information on its operation. The information that you get Oki 6300 will certainly help you make a decision on the purchase.
If you already are a holder of Oki 6300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oki 6300.
However, one of the most important roles played by the user manual is to help in solving problems with Oki 6300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oki 6300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
