Instruction/ maintenance manual of the product 6100E+ Oki
Go to page of 254
OkiLAN 6100e+ ® User ’ s Guide High Performance Ethernet Network Print Server.
ii Copyright and T rademark Information OKI OkiLAN 6100e+ User ’ s Guide Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control.
iii Organization and Contents OKI OkiLAN 6100e+ User ’ s Guide Organization This manual has been divided into eight sections. Section I contains and installation instructions for the OkiLAN 6100e+ print server .
iv Organization and Contents OKI OkiLAN 6100e+ User ’ s Guide Section IV : TCP/IP ................................................. IV -1 Chapter 1: Introduction ................................................ IV -5 Chapter 2: Configuring the OkiLAN 6100e+ .
v Organization and Contents OKI OkiLAN 6100e+ User ’ s Guide Section IX: Regulatory Information ..................... IX-1 Section X: IR Printing ............................................ X- 1 Chapter 1: IR Tranceiver Features ...................
vi Network Operating Systems OKI OkiLAN 6100e+ User ’ s Guide Network Operating Systems Overview OkiLAN 6100e+ simultaneously supports several network protocols in various combinations. Below is a list of supported network protocols accompanied with NOS/OS requirements.
vii T echnical Support OKI OkiLAN 6100e+ User ’ s Guide Service Information Note: This information is valid for the United States and Canada only . Okidata On Line V isit the OKI DA T A W eb Site at http://www .
viii T echnical Support OKI OkiLAN 6100e+ User ’ s Guide Oki Data Customer Support Representatives Agents are available 24 hours a day , 7 days a week at 1-800-OKIDA T A (1-800-654-3282). Please be sure that you are calling from a telephone close to your printer , so you can describe your problem accurately .
ix T echnical Support OKI OkiLAN 6100e+ User ’ s Guide Brazil Oki Data do Brasil, Ltda. T el: 55-1 1-501 1-1518 Fax: 55-11-5012-0267 Mexico Oki Data de Mexico, S.
x T echnical Support OKI OkiLAN 6100e+ User ’ s Guide When you call T echnical Support, the following information will help us answer your questions more quickly and accurately .
Hardware Installation Section I: Hardware Installation.
I - 2 Section I - Har dware Installation OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1: Installing the OkiLAN 6100e+ ............... I-3 Hardware Installation ..................................... I-3 Installing the OkiNet Utilities in W indows .
I - 3 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation Chapter 1 Installing the OkiLAN 6100e+ The OkiLAN 6100e+ 1. T urn the printer off. 2. Unplug the power cord. 3. Detach the interface cable from the back of the printer .
I - 4 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide 4. Push the OPEN button, then open the top cover . 5. Remove and save the two large screws on the right side, which hold the side panel in place.
I - 5 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation 7a. OKIP AGE 16n, 18, 20, 20DX and 24DX: Remove and save the two screws on the left of the metal plate covering the internal board, then pull the plate out about an inch and lift it out.
I - 6 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide 8. Plug the connector on the OkiLAN board into the socket on the board in the printer . Make sure the pins are aligned properly . 9. Fasten the OkiLAN board into place with the supplied mounting screws.
I - 7 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation 1 1. Replace the side panel (tabs go in slots): you’ll need to move the cover hinge out of the way before you put the side panel back in place.
I - 8 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide 14. Attach one end of the cable to the connector on the OkiLAN board, and the other end to the parallel connector of the printer . Secure the cable at both ends.
I - 9 Section I - Chapter 1 - Installing the OkiLAN 6100e+ OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation Windows Utility Groups: NetW are Management Utilities OkiNet Utility for NetW are Ok.
I - 10 Section I - Appendix A - Har dware T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Appendix A Hardware T roubleshooting OkiLAN 6100e+ Print Server Status PTR light on = printer port initia.
I - 11 Section I - Appendix A - Har dwar e T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation Unable to Print If your OkiLAN 6100e+ passes self-test and you are unable to print.
I - 12 Section I - Appendix B - Sample Configuration Sheet OKI OkiLAN 6100e+ User ’ s Guide Appendix B Sample Configuration Sheet OkiLAN 6100e+ Configuration Sheet Page 1 6100e+ OkiLAN 6100e+ Configuration Sheet Page 1 Oki Data 2000 Bishops Gate Boulevard, Mt.
I - 13 Section I - Appendix B - Sample Configuration Sheet OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation OkiLAN 6100e+ Configuration Sheet page 2 EtherT alk (ENABLED) Node Address: 0064:D5h.
I - 14 Section I - Appendix C - W iring Specifications OKI OkiLAN 6100e+ User ’ s Guide Appendix C Wiring Specifications Connector Specifications For your reference, we have included the following connector pin assignments. OKILAN 6100E+, ETHERNET , 10/100BASE-T CONNECTOR SIGNAL ASSIGNMENTS Pin # .
I - 15 Section I - Appendix C - W iring Specifications OKI OkiLAN 6100e+ User ’ s Guide Hardware Installation OkiLAN 6100e+ Parallel Output Port Pin 1 Pi n 19 Pin 36 Pin 18 16.3 mm 69 mm All dimensio ns are shown in milli meters and a re inclu ded for referenc e only IE EE 12 84-C Plug IEEE 1284 -B Plug 8 mm 32.
I - 16 Section I - Appendix D - Cable Schematics OKI OkiLAN 6100e+ User ’ s Guide Appendix D Cable Schematics 22 4 21 3 20 2 19 1 26 8 25 7 24 6 23 5 30 12 29 11 28 10 27 9 34 16 33 15 32 14 31 13 35 17 36 18 IEEE 12 84-C (0.050 C enterline) PIN IEEE 12 84-B (0.
Advanced Management Section II: Advanced Management Features.
II - 2 Section 2 - Advanced Management Featur e OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 SNMP ...................................................... II-3 Overview ....................................................... II-3 Private MIB .
II - 3 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Chapter 1 Single Network Management Protocol (SNMP) Overview Simple Network Management Protocol (SNMP) provides network administrators with the ability to communicate management functions between an SNMP manager and an SNMP agent.
II - 4 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6100e+ User ’ s Guide Note : If you attempt a reset while a job is printing, the job may not print successfully . Certain variables are critical, that is, they change a fundamental operating parameter of the OkiLAN 6100e+.
II - 5 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6100e+ User ’ s Guide Advanced Management In order to receive OkiNet Alert traps, the OkiLAN 6100e+ must have bi-directional status enabled (it is disabled by default). Extended Status can be enabled through the OkiLAN 6100e+ Configuration utility (telnet) from the Configur e Port option.
II - 6 Section 2 - Chapter 2 - Banyan Outlook OKI OkiLAN 6100e+ User ’ s Guide Chapter 2 Banyan Outlook The OkiNet for VINES and OkiNet for NetW are utilities can be launched from within the Banyan VINES Outlook network management software.
II - 7 Section 2 - Chapter 3 - HP JetAdmin Support OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Chapter 3 HP JetAdmin Support Overview This section contains instructions and information on how to configure and obtain diagnostic information from your OkiLAN 6100e+ using the Hewlett-Packard JetAdmin software.
II - 8 Section 2 - Chapter 3 - HP JetAdmin Support OKI OkiLAN 6100e+ User ’ s Guide 7. Select the desired queues from the list of A vailable Queues to be added into service. Click the Service button to move the selection to the Serviced Queues column.
II - 9 Section 2 - Chapter 4 - HP W eb JetAdmin Support OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Chapter 4 HP W eb JetAdmin Support Overview This section contains instructions and information on how to configure, install, and obtain diagnostic information from your OkiLAN 6100e+ using the Hewlett-Packard W eb JetAdmin software.
II - 10 Section 2 - Chapter 4 - HP W eb JetAdmin Support OKI OkiLAN 6100e+ User ’ s Guide 4. On the Install Printer Page 1 page, select an NT domain from the pull-down menu. Enter the user name and password of a domain user with sufficient rights to create a printer and click the Continue button.
II - 11 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Chapter 5 OkiLAN 6100e+ Web Configuration Overview This section contains instructions and information on how to configure and manage your OkiLAN 6100e+ using a standard W eb browser .
II - 12 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide Note : As a layer of security , the TCP port number that the device uses to communicate with browsers, called the HTTP port , can be modified from a default of 80.
II - 13 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Configuration 1. Select the Login as Admin link under the Configuration menu. 2. On the Enter Network Passwor d screen, enter the User name and Passwor d .
II - 14 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide W ARNING: Changes will not be saved if the Submit Changes button is not selected before continuing to another page.
II - 15 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide Advanced Management interface: Web Admin Configuration Under the Configuration menu, select the Admin(W eb) link. • Admin Name - The name used to access full configuration privileges.
II - 16 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide Status The home page for the print server shows general status information including the status of all printers currently attached. For more detailed status information, select the V iew Cnfg Sheet link under the Status menu.
II - 17 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Reset Reset Reset the print server by selecting the Reset link under the Reset menu. A message will appear asking you to confirm the reset.
II - 18 Section 2 - Chapter 5 - OkiLAN 6100e+ W eb Configuration OKI OkiLAN 6100e+ User ’ s Guide T roubleshooting Server Connection • The print server only supports two simultaneous HTTP connections. If your browser fails to connect to the print server , the browser may be trying to open more than two connections.
II - 19 Section 2 - Chapter 6 - Additional Management Featur es OKI OkiLAN 6100e+ User ’ s Guide Advanced Management Chapter 6 Additional Management Features OkiNet Alert OKI OkiNet Alert enterprise.
II - 20 Section 2 - Chapter 6 - Additional Management Featur es OKI OkiLAN 6100e+ User ’ s Guide OkiNet for NDS OkiNet for NDS allows administrators to create and manage OKI print server objects in the NDS tree. OkiNet for NDS integrates into Novell’ s NetW are Administrator , NetW areAdmin.
NetWare Section III: Netware.
III - 2 Section 3 - NetW are OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 Introduction ........................................... III-4 Overview ...................................................... III-4 Before Y ou Start ..........
III - 3 Section 3 - NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Chapter 3 OkiNet for NDS .................................... III-24 Overview .................................................... III-24 Installing OkiNet for NDS for Novell NetW are 4.
III - 4 Section 3 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide Chapter 1: Introduction Overview This section contains instructions and information on how to configure your OkiLAN 6100e+ in the NetW are environment. There are two environments in which to configure the OkiLAN 6100e+: • Bindery (NetW are 3.
III - 5 Section 3 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide NetWare Selecting PServer or RPrinter/NPrinter Mode Y our OkiLAN 6100e+ supports both PServer and NPrinter mode. There are several factors to consider when choosing which mode to use.
III - 6 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide Chapter 2 OkiNet for NetW are Overview This chapter contains information about how to configure the OkiLAN 6100e+ in Bindery and NDS environments using the OkiNet for NetW are utility .
III - 7 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Running OkiNet for NetW are T o run the utility , double-click on the OkiNet icon.
III - 8 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetW are Configuration Options T o configure options specific to the NetW are protocol, select the NetW are file tab. The following screen will display: PServer or RPrinter Mode Several factors should be considered when choosing between PServer or RPrinter mode.
III - 9 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare NDS printer objects. Once you have created NDS objects and queues, use the OkiNet for NetW are utility to configure the following fields: • Preferred File Server - This is the file server on which the print server object was created.
III - 10 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetW are Port Configuration Options T o modify the NetW are port settings to fit your NetW are printing environment, select the NetW are Port file tab.
III - 11 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Output Port Configuration Options T o configure the OkiLAN 6100e+ output port, select the Output Port file tab. The following screen will display: Port Number Select the port you wish to configure.
III - 12 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide and inserts the appropriate character string in front of each print job to switch the printer to the appropriate printer language. Note : If you are not switching languages or the printer can switch languages automatically , this option should be set to OFF .
III - 13 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Output T ype Select the desired level of support for 1284 communications.
III - 14 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide Fill in the following information: System Name Enter the name of your choice. This name will identify the OkiLAN 6100e+ in your SNMP-based management program. System Contact Enter any information useful to a user if problems with the OkiLAN 6100e+ arise.
III - 15 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Trap Community Name Enter the community name which will be used when traps are sent from the OkiLAN 6100e+. This setting allows trap utilities to only accept traps from devices with appropriate community names.
III - 16 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide Trap Destination • NetW are Protocol - Enter the network number and hardware address, respectively , to which traps will be sent.
III - 17 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Enabling/Disabling Protocols T o enable or disable protocols on the OkiLAN 6100e+, select the Protocols file tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6100e+ will no longer communicate using that protocol.
III - 18 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide Resetting the OkiLAN 6100e+ T o reset the OkiLAN 6100e+, select the OkiLAN 6100e+ from the list of available print servers. From the Print Server menu bar , select Reset .
III - 19 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare CAUTION: Make sure there are no active print jobs when you select Restore Factory Defaults. If you reset the OkiLAN 6100e+ while a job is printing, the job may not print successfully .
III - 20 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide Modifying View Settings Before modifying the settings, select the name of the view you wish to edit from the Name field. Display Filter The filter option displays only those print servers matching specific criteria.
III - 21 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare • Specify Devices/Networks - This method adds specific print servers (or groups of print servers) to the list. This can be useful when only a subset of the list of OkiLAN 6100e+ products is desired.
III - 22 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide Refresh The refresh rate defines how often the OkiNet for NetW are utility updates the main print server list. T o define a refresh rate, select the Automatic Refresh box and then enter the refresh rate in the field provided.
III - 23 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6100e+ User ’ s Guide NetWare Set Community Name Enter the Set Community Name necessary to access the OkiLAN 6100e+ or group of OkiLAN 6100e+ products selected. Add Select the Add button to define access to a new OkiLAN 6100e+ or a group of OkiLAN 6100e+ products.
III - 24 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide Chapter 3 OkiNet for NDS Overview OkiNet for NDS is a Dynamic Link Library (DLL) which allows users to create and manage OKI print server objects in the NDS tree.
III - 25 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide NetWare Refer to the following table to determine which method to use to install OkiNet for NDS: NetW are V ersion Client Operating System W indows 3.x W indows 95/98 W indows NT/2000 NetW are 4.
III - 26 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide 3. If OkiNet for NDS is installed on the file server , anybody using NetW are Administrator on the network can use it. T o do so, they must add the following text to the NW ADMIN.
III - 27 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide NetWare Installing OkiNet for NDS for Novell NetW are 4.1 1 and Windows 95/98 and Windows NT/2000 OkiNet for NDS must be installed in the same location you have installed NetW are Administrator .
III - 28 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide Creating a New OkiLAN 6100e+ Object T o create a new OkiLAN 6100e+ object from Novell’ s NetW are Administrator , perform the following steps: 1. Select the container (also known as organizational unit) in which you want the object created.
III - 29 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide NetWare Note : If the Device list box is still empty , select Find Device . This will allow you to locate the specific device you are trying to define. Y ou will be prompted for the Ethernet address and network number of the device.
III - 30 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide 6. Select Assign . 7. Select or create a NetW are Printer object from the Printer/Queue Assignments dialog. 8. Select or create a NetW are Print Queue object from the Printer/Queue Assignments dialog.
III - 31 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide NetWare Configuring the OkiLAN 6100e+ Using OkiNet for NDS The following steps outline how to configure an OkiLAN 6100e+. 1. From the NW Admin screen, select (double-click) the OkiLAN 6100e+ you wish to configure.
III - 32 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6100e+ User ’ s Guide The install utility on the installation diskette can also be used to remove the OKI print server class. This utility removes the class from Novell’ s NetW are Administrator and removes all the associated files that were copied during the installation process.
TCP/IP Section IV : TCP/IP.
IV - 2 Section 4 - TCP/IP OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 Introduction .......................................... IV -5 Overview ...................................................... IV - 5 Software Requirements .........
IV - 3 Section 4 - TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Saving the Configuration ............................ IV -34 Displaying OkiLAN 6100e+ Diagnostic Information ............................................... IV -34 Printing a Configuration Sheet .
IV - 4 Section 4 - TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Configuring Solaris 2.x for Printing with the OkiLAN 6100e+ ........................... IV -76 Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6100e+ ....... IV -7 8 Appendix C Internet Printing Protocol (IPP) .
IV - 5 Section 4 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Chapter 1 Introduction Overview This section contains instructions and information on how to configure your OkiLAN 6100e+. Y ou will also be instructed on how to set up your host computers to print to the OkiLAN 6100e+ using the TCP/IP protocol.
IV - 6 Section 4 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide Network Preparation • Y ou should be familiar with network administration as well as the physical setup and operation of your network. • Advise users of possible disruption during installation.
IV - 7 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Chapter 2 Configuring the OkiLAN 6100e+ Choosing an IP Address Every TCP/IP network device is required to have a unique IP address.
IV - 8 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide Configuring the OkiLAN 6100e+ There are four utilities available to configure the OkiLAN 6100e+ for TCP/IP printing. Y ou may use whichever utility is best suited for your needs.
IV - 9 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide TCP/IP T o use Gleaning, you must have W indows 95/98, W indows NT/2000, or super-user privileges on a UNIX system. 1. Add an entry in the ARP table that assigns an IP address to the hardware address of the OkiLAN 6100e+.
IV - 10 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide DHCP The Dynamic Host Configuration Protocol (DHCP) provides a framework for passing configuration information to hosts on a TCP/IP network in a client/ server fashion.
IV - 11 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Static Route Entry When the OkiLAN 6100e+ is powered on or reset and no permanent IP address has been assigned, it will attempt to obtain an IP address through Gleaning, RARP , BOOTP or DHCP .
IV - 12 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide IP addresses. If a match is found, the server ’ s response will include the IP address of the device. Most UNIX operating systems support either the RARP or BOOTP protocol.
IV - 13 Section 4 - Chapter 2 - Configuring the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide TCP/IP V erifying Access to the OkiLAN 6100e+ Use the ping utility to verify access to the OkiLAN 6100e+. ping < IP addr ess of OkiLAN 6100e+ > If the OkiLAN 6100e+ does not respond, your network or the device is not configured correctly .
IV - 14 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide Chapter 3 TCP/IP Configuration and Printing Overview The OkiLAN 6100e+ supports printing from compu.
IV - 15 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Configuring for TCP/IP Network Printing Most computers that support TCP/IP network printing use the Remote Line Printer Daemon (LPD) protocol.
IV - 16 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide The OkiLAN 6100e+ will parse the remote queue name and search for certain characters at the end which tell how to convert an ASCII print job.
IV - 17 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Configuring a BSD-Style Print Queue For remote BSD-Style LPD printing, add the OkiLAN 6100e+ as a remote printer in the “/etc/printcap” database to each host printing to the OkiLAN 6100e+.
IV - 18 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide log_file_name This is the path to a file where error information from the lpd will be logged.
IV - 19 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Note: The Remote LPD implementation of the OkiLAN 6100e+ does not support any UNIX LPD input or output filters or the direct printing of banner pages.
IV - 20 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide TYPE Changes the representation type used for data transfer . Image (or binary) and ASCII are the only types supported. ASCII Equivalent to “TYPE ASCII”.
IV - 21 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Example: The following example prints a PostScript file called chart.ps to the OkiLAN 6100e+ printer Port 1 using FTP . $ ftp OkiLAN 6100e_name<Enter> Connected to OkiLAN 6100e_name.
IV - 22 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6100e+ User ’ s Guide Raw Port Printing Host computer software can use a raw TCP/IP port connection to send data to the OkiLAN 6100e+.
IV - 23 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Chapter 4 OkiNet for TCP/IP Overview This section contains information about OkiNet for TCP/IP . OkiNet for TCP/IP provides SNMP-based support for the entire OkiLAN 6100e+ family of print servers.
IV - 24 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Running OkiNet for TCP/IP T o run the utility , double-click on the OkiNet icon.
IV - 25 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Configuring TCP/IP Options T o configure options specific to the TCP/IP protocol, select the TCP/IP tab.
IV - 26 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Subnet Mask If your network environment includes subnets, you will want to set the subnet mask. The subnet mask must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255.
IV - 27 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP T elnet/Http Password: Allows you to modify the current password required for T elnet or Http access. The default password is the serial number of the OkiLAN 6100e+.
IV - 28 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide EtherT alk Configuration Options T o modify the configuration settings specific to the EtherT alk protocol such as the name and zone.
IV - 29 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP • OFF - Print data stream will be sent directly to the output port without alteration. • PCL - Inserts the appropriate character string in front of each print job to switch the printer to the PCL print language.
IV - 30 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Output T ype Select the appropriate baud rate. Bidirectional Printer Status Support Enable this option for enhanced status from the bidirectional printer .
IV - 31 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP System Contact Enter any information useful to a user if problems with the OkiLAN 6100e+ arise. System Location Enter a description of the OkiLAN 6100e+ location.
IV - 32 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Enabling/Disabling Protocols T o enable or disable protocols on the OkiLAN 6100e+, select the Protocols tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6100e+ will no longer communicate using that protocol.
IV - 33 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Trap Destination • TCP/IP Protocol - Enter the IP address to which traps will be sent. The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255.
IV - 34 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Saving the Configuration Once all settings have been defined, select OK .
IV - 35 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Restoring Factory Default Settings T o restore the OkiLAN 6100e+ to factory default settings, select the OkiLAN 6100e+ from the list of available print servers.
IV - 36 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Creating Customized Views OkiNet for TCP/IP allows users to create multiple customized views for the list of OkiLAN 6100e+ products. By creating different views, the user can narrow the information displayed to that which is of highest priority .
IV - 37 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Modifying View Settings Before modifying the settings, select the name of the view you wish to edit from the Name field. Sort The Sort option displays the OkiLAN 6100e+ list in a specific order .
IV - 38 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide Search Filter The Search option defines the criteria for identifying OkiLAN 6100e+ products on the network. • Search Local Network - This method broadcasts a discovery request to locate all OkiLAN 6100e+ print servers on the local network.
IV - 39 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP far left of the screen, follow these steps: 1. Select the first column in the Columns Displayed field. 2. Select the column to be added from the Columns A vailable field.
IV - 40 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide 6100e+. T o configure OkiNet for TCP/IP to use the correct community names, select Special Options from the File menu. IP Address This field displays the address of each OkiLAN 6100e+ for which OkiNet for TCP/IP has defined access.
IV - 41 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Configuring the Discovery UDP Port Number In order to discover OkiLAN 6100e+ print servers on the network, OkiNet for TCP/IP communicates with the OkiLAN 6100e+ print servers on a UDP port number .
IV - 42 Section 4 - Chapter 5 - T elnet Configuration OKI OkiLAN 6100e+ User ’ s Guide Chapter 5 T elnet Configuration Overview The OkiLAN 6100e+ Configuration utility ( telnet ) provides system, network and printer status information and allows you to change the configuration of your OkiLAN 6100e+.
IV - 43 Section 4 - Chapter 5 - T elnet Configuration OKI OkiLAN 6100e+ User ’ s Guide TCP/IP ***************************************** OkiLAN 6100e+ Configuration Utility 1. Show Network/Printer Information 2. Change Password 3. Specify Print Server IP Address 4.
IV - 44 Section 4 - Chapter 5 - T elnet Configuration OKI OkiLAN 6100e+ User ’ s Guide RARP or BOOTP server does not need to be available when the OkiLAN 6100e+ is powered on. If you change the IP address, the change will remain undetected until the OkiLAN 6100e+ is reset or is powered off and on.
IV - 45 Section 4 - Chapter 5 - T elnet Configuration OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Identify Default Gateway IP Address (Option 5) If your local network is attached to other networks, you must specify the address of your default gateway . Whenever packets need to be sent to another network, the default gateway is used.
IV - 46 Section 4 - Chapter 5 - T elnet Configuration OKI OkiLAN 6100e+ User ’ s Guide • Language Switching Sequence - If you select Custom Printer from the Configur e Printer T ype screen, you must indicate the switching sequence to be used for both PCL and PostScript.
IV - 47 Section 4 - Chapter 5 - T elnet Configuration OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Restore to Factory Default Configuration (Option 9) This option automatically restores the OkiLAN 6100e+ to its original factory defaults.
IV - 48 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Appendix A T roubleshooting Main Status Indicator Upon power-up, the main status indicator flashes orange. It changes to green when the OkiLAN 6100e+ passes self-test.
IV - 49 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Unable to Assign IP Address Gleaning If you ping the device and are not getting a response, the glean is not working.
IV - 50 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide UNIX BOOTP If you are running UNIX, try the following methods with the BOOTP server (check the documentation for your particular UNIX flavor). • V erify the BOOTP server has reread the “/etc/ bootptab” file when the new entry was added.
IV - 51 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Static Route Entry If the OkiLAN 6100e+ has printed a configuration page showing the default address, but it cannot be reached through telnet , check the following: • Display the host’ s routing tables with the ‘netstat - r ’ command.
IV - 52 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide OkiNet for TCP/IP - Winsock Errors • If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the hosts file in the W indows directory (check the documentation for your W indows TCP/IP stack).
IV - 53 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Printing a Configuration Page If the status indicator turns solid orange due to an error and no configuration page is printed, your printer may be configured for PostScript operation.
IV - 54 Section 4 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide • If the ftp succeeds, there is a problem with the lpr/ lp setup. V erify the hostname or IP address is correctly set for the queue. T ry doing an lpstat (System V) or lpq (BSD) to query the status of the OkiLAN 6100e+.
IV - 55 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Appendix B Application Considerations Overview This appendix provides application notes for the following: • Assigning the OkiLAN 6100e+ IP Address with BOOTP • Assigning the OkiLAN 6100e+ IP Address with RARP • Using the W indows NT v3.
IV - 56 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide (which may be a UNIX workstation) will respond with an IP address. The device will then know its IP address and use this address to perform subsequent TCP/IP transactions.
IV - 57 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP A name can be arbitrarily assigned to any device on a network. The following examples use the name OKIPRINTER. Remember that this name is arbitrary; a customer can assign any name they wish.
IV - 58 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide 4. The bootpd daemon transmits a response to the OkiLAN 6100e+ with the IP address 192.168.42.55. The OkiLAN 6100e+ will use this IP address for all subsequent transmissions.
IV - 59 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Configuring the OkiLAN 6100e+ IP Address with RARP RARP is an acronym for R everse A ddress R esolution P rotocol. Every TCP/IP network device must have a unique 32-bit IP address.
IV - 60 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide Configuration Files The purpose of RARP is to look up a 32-bit IP address given a 48-bit network hardware address.
IV - 61 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP 4. The rarpd then consults the “/etc/hosts” file and looks up the name OKIPRINTER. It finds an IP address (in this case 192.168.42.55) associated with the name OKIPRINTER.
IV - 62 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide Configuring HP-UX v8.07 for Printing with the OkiLAN 6100e+ This application note describes the configuration of the printing system on the HP-UX ver . 8.07 of the UNIX operating system.
IV - 63 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP 2. Make sure the rlp process is not running by typing at the UNIX prompt: ps -e | grep rlp If rlp is not running, you will not see any output after executing this command.
IV - 64 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide 3. Select the following options, in order , from the SAM menu: Peripheral Devices -> Printers and Plotters -> Actions -> Add a Remote Printer (Do NOT select Add a Network Printer) A form appears asking you to define a remote printer .
IV - 65 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP 6. Enable the printer you just created using SAM. Peripheral Devices -> Printers and Plotters -> Enable a Printer ... 7. Printer name: — lj4 8.
IV - 66 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide Prerequisites Before you proceed, the following prerequisites must be met. Most of the time steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network.
IV - 67 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Procedure HP-UX uses an interactive utility called SAM (System Administration Manager) to configure printing. 1. Login to the HP-UX system as root. 2.
IV - 68 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide h) Allow anyone to cancel r equests. Check if desired. i) Remote printer is on a BSD system. Check this box. T ells the HP-UX system that it is communicating with a Berkeley style remote printer (such as LPD).
IV - 69 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP • yourqueuename - This is the name of the queue on the OkiLAN 6100e+ and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs.
IV - 70 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide 4. Make sure the following entry is in the “/etc/services” file: printer 515/tcp spooler 5.
IV - 71 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP c) Remote printer name - yourqueuename This is the name of the queue on the OkiLAN 6100e+ and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs.
IV - 72 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide Configuring SCO UNIX for Printing with the OkiLAN 6100e+ This application note describes the configuration of the printing system on the Santa Cruz Operation’ s (SCO) version of the UNIX operating system.
IV - 73 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Procedure 1. Login to the SCO machine as root. 2. Install Remote Line Printing or verify that it is running by typing mkdev rlp at the UNIX prompt. It will respond by asking if you want to install or remove remote line printing.
IV - 74 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide IBM’ s AIX ver . 3.x for Printing with the OkiLAN 6100e+ This application note describes the configuration of the printing system on IBM’ s AIX version 3.
IV - 75 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP 3. T o add a remote queue, select the following options from the SMIT menu: Spooler (Print Jobs an.
IV - 76 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide 6. Start the qdaemon by typing: AIX> startsrc -s qdaemon 7. T ry printing to the printer attached to the OkiLAN 6100e+ by issuing the following command: AIX> lpr -Plj4 filename Configuring Solaris 2.
IV - 77 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP Prerequisites Before you proceed, the following prerequisites must be met: 1. The name OKIPRINTER and the IP address assigned to the OkiLAN 6100e+ are in the “/etc/hosts” file on the Solaris system.
IV - 78 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6100e+ This application note describes the configuration of the printing system on the Sun-OS ver 4.
IV - 79 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6100e+ User ’ s Guide TCP/IP If the LPD daemon is running, you should see output similar to: root 135 0.
IV - 80 Section 4 - Appendix C - Internet Printing Pr otocol (IPP) OKI OkiLAN 6100e+ User ’ s Guide Appendix C Internet Printing Protocol (IPP) Internet Printing Protocol (IPP) is an application level protocol that can be used for distributed printing over the Internet.
Banyan VINES Section V : Banyan VINES.
V - 2 Section 5 - Banyan VINES OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 Introduction ........................................... V -3 Overview ....................................................... V -3 Before Y ou Start .........
V - 3 Section 5 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Chapter 1 Introduction Overview OkiLAN 6100e+ replaces a dedicated PC running PCPRINT . First, the OkiLAN 6100e+ logs on to the network as a user and opens a connection with a print service.
V - 4 Section 5 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide VINES Commands, Functions, and Conventions Y ou should be familiar with the following VINES commands, functions, and conventions. See your Banyan VINES manuals for more information.
V - 5 Section 5 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Related Documents Y our printer manuals contain related information about printer configuration. Y our Banyan VINES manuals contain related information about network configuration and printing operation.
V - 6 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide Chapter 2 Installing the OkiLAN 6100e+ Overview T o configure the network to access and use the OkiLAN 6100.
V - 7 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES 3. The Manage Users screen will appear . Select ADD a user . 4. The Add A User screen will appear . T ype in a Str eetT alk Name , Description , Nickname , and a Passwor d .
V - 8 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide 5. The next screen is Add User Profile . The OkiLAN 6100e+ does not require any access rights while operating on the Banyan VINES network. T o maintain security on your network, we recommend you select a profile which grants no access rights to the user .
V - 9 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Adding a Print Service The tasks involved in adding a print service are: • Adding and starti.
V - 10 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide 4. The Add A Service screen will be displayed. Enter a Str eetT alk name and a Description for the print service and then press Enter to advance to the next screen.
V - 11 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES After making your selection, the following message will appear: The service is running but not yet available to users. For the service to be available, you must configure at least one destination.
V - 12 Section 5 - Chapter 2 - Installing the OkiLAN 6100e OKI OkiLAN 6100e+ User ’ s Guide 14. The Print Queue Status screen will display . Y ou can now set up the print queue to accept print jobs. Respond YES to each question and press F10 . A message will appear , stating the print service is ready to accept print jobs.
V - 13 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Chapter 3 The OkiNet for VINES Utility Overview This section contains information about the OkiNet for VINES utility . OkiNet for VINES is also known as VPMAN.
V - 14 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Access Rights Y ou must have the appropriate access rights to use OkiNet for VINES. Access rights are based on group AdminLists comprised of StreetT alk names.
V - 15 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES OkiNet for VINES Communication Options OkiNet for VINES options can be configured by selecting Startup from the Options pull-down menu.
V - 16 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Configuring the Print Server 1. From the VINES Print Manager screen, select the OkiLAN 6100e+ you wish to configure. V erify the serial number on the screen matches the serial number on the OkiLAN 6100e+.
V - 17 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES 3. Select Add Service to add a print service. Then, select the destination port of the OkiLAN 6100e+ to which the printer is connected. Once you have configured your print services, you may need to configure the printer port parameters.
V - 18 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Saving Configuration Settings When you are satisfied with your configuration settings, select OK from the Configuration screen. This will save all changes and return you to the main menu.
V - 19 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Restore VINES Defaults Clears the Print Service names assigned and user name/ password. This does not af fect the configurations of other protocols.
V - 20 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Configuring the TCP/IP Protocol T o configure options for the TCP/IP protocol, select TCP/IP Configuration from the Pr otocols menu from the Print Server Configuration screen.
V - 21 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255. If you change the IP address, the change will remain undetected until the OkiLAN 6100e+ is reset or powered off and on.
V - 22 Section 5 - Chapter 3 - The OkiNet for VINES Utility OKI OkiLAN 6100e+ User ’ s Guide SNMP Options The SNMP configuration settings allow you to specify the SNMP community names and where SNMP T rap messages are to be sent.
V - 23 Section 5 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Appendix A T roubleshooting Unable to Print If your OkiLAN 6100e+ passes self-test, but you are unable to send data to the printer via the OkiLAN 6100e+, first try to print a configuration sheet from the OkiNet for VINES utility .
V - 24 Section 5 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Print server is not a destination for print service The PCPRINT StreetT alk name must match the name you assigned using the Destination Attributes screen when you configured the network to access and use the OkiLAN 6100e+.
V - 25 Section 5 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Banyan VINES Print server not responding! The print server is not responding to the network call. The address may have changed. Select the Refresh button or exit OkiNet for VINES and try again.
.
LAN Manager/ Server Section VI: LAN Manager/LAN Server.
VI - 2 Section 6 - LAN Manager/LAN Server OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 Introduction .......................................... VI-3 Overview ...................................................... VI-3 System Requirements .
VI - 3 Section 6 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Chapter 1 Introduction Overview This section contains information about the OkiNet for OS/2 utility . This utility allows you to install and configure the OkiLAN 6100e+ for your specific environment.
VI - 4 Section 6 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide DLC/802.2 Protocol Stack The DLC/802.2 protocol stack must be loaded and running on the file server from which the OKI Network Printer Redirector will run. W ith LAN Manager , this means you must enable the remote boot facility .
VI - 5 Section 6 - Chapter 2 - Installation OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Chapter 2 Installation Overview T o install the OkiLAN 6100e+: 1. Install the OkiNet for OS/2 utilities software. 2. Run the OkiNet for OS/2 utility to add a local printer port.
VI - 6 Section 6 - Chapter 2 - Installation OKI OkiLAN 6100e+ User ’ s Guide • The initial installation requires the file server to be brought down and then back up again.
VI - 7 Section 6 - Chapter 2 - Installation OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Running INST ALL 1. Login to the server with administrator privileges. If you are reinstalling the utility , disable the spooler before running install.
VI - 8 Section 6 - Chapter 2 - Installation OKI OkiLAN 6100e+ User ’ s Guide 3. Select OK . The ESI Print Server Status Screen will display . From the Configur e menu, select Add Local Port . 4. Select a print server and port. Print servers are identified by serial number .
VI - 9 Section 6 - Chapter 2 - Installation OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Creating an OS/2 Printer T o print to the local port created by OkiNet for OS/2, you must create an OS/2 printer . OS/2 1.3 1. Open the Print Manager from the desktop.
VI - 10 Section 6 - Chapter 2 - Installation OKI OkiLAN 6100e+ User ’ s Guide Printing a Configuration Sheet Y ou can verify communication by printing a configuration sheet using OkiNet for OS/2. 1. Select Configure from the main Print Server window .
VI - 11 Section 6 - Chapter 3 - Printing in the OS2 Envir onment OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Chapter 3 Printing in the OS/2 Environment Overview OS/2 provides several methods for selecting a printer from within an application.
VI - 12 Section 6 - Chapter 3 - Printing in the OS2 Envir onment OKI OkiLAN 6100e+ User ’ s Guide 3. Select the print queue associated with the OkiLAN 6100e+. OS/2 applications that use the default printer will now print to the printer attached to the OkiLAN 6100e+.
VI - 13 Section 6 - Chapter 4 - Additional Utility Featur es OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Chapter 4 Additional Utility Features Overview Y ou can run the OkiNet for OS/2 util.
VI - 14 Section 6 - Chapter 4 - Additional Utility Featur es OKI OkiLAN 6100e+ User ’ s Guide 3. From the Configur e menu, select Configure Print Serve r . The following screen will display: The OkiLAN 6100e+ will reset by selecting OK to save any of the options, except the Print Configuration Sheet option.
VI - 15 Section 6 - Chapter 4 - Additional Utility Featur es OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Restoring Factory Defaults The Restore Defaults option restores the factory default settings for the LAN Manager/LAN Server protocol and output ports.
VI - 16 Section 6 - Chapter 5 - Using HELP OKI OkiLAN 6100e+ User ’ s Guide Chapter 5 Using Help Overview The OkiNet for OS/2 utility provides both general and context-specific help. General Help T o access help information about installation and configuration, select Help from the main menu, then select General Help .
VI - 17 Section 6 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide LAN Manager/ Server Appendix A T roubleshooting No Configuration Sheet If the LED turns solid orange due to a network protocol error and no configuration sheet is printed, your printer may be configured for PostScript operation.
.
EtherT alk Section VII: EtherT alk.
VII - 2 Section 7 - EtherT alk OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 Introduction ......................................... VII-3 Overview .................................................... VII-3 System Requirements ..........
VII - 3 Section 7 - Chapter 1 - Intr oduction OKI OkiLAN 6100e+ User ’ s Guide EtherT alk Chapter 1 Introduction Overview This section describes the steps necessary to configure the EtherT alk protocol.
VII - 4 Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility OKI OkiLAN 6100e+ User ’ s Guide Chapter 2 The OkiLAN 6100e+ Utility Overview The OkiLAN 6100e+ utility allows the user to: • Change the O.
VII - 5 Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility OKI OkiLAN 6100e+ User ’ s Guide EtherT alk Renaming the OkiLAN 6100e+ Printer The OkiLAN 6100e+ Printer Selection window contains a list of all OkiLAN 6100e+ printers found in the selected zones.
VII - 6 Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility OKI OkiLAN 6100e+ User ’ s Guide 4. Click OK . Print Configuration The Print Configuration option is accessed by selecting Print Config from the File pull-down menu. Choose this option to print an OkiLAN 6100e+ configuration sheet.
VII - 7 Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility OKI OkiLAN 6100e+ User ’ s Guide EtherT alk • T ype 2 (optional) - Select this option when configuring for a spooler . Enable Port This option allows you to enable or disable a port. If a port is disabled, it will appear in the OkiLAN 6100e+ utility but will not appear in the Chooser .
VII - 8 Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility OKI OkiLAN 6100e+ User ’ s Guide Zone = Default - (The default zone for the network segment will be used) Port Enabled = Y es Appendix A T roubleshooting Before Y ou Call This appendix allows you to troubleshoot problems you may have installing or using the EtherT alk protocol.
VII - 9 Section 7 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide EtherT alk • V erify that the OkiLAN 6100e+ has passed self-test. The status indicator should be solid green. • Check the connections between the OkiLAN 6100e+ and the Macintosh.
VII - 10 Section 7 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide document-specific. Check for problems in the document. If your printer has error handling capability , activate the error handler and try to print the first document again to obtain an error report.
VII - 11 Section 7 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide EtherT alk appears in the Chooser . If not, refer to general EtherT alk troubleshooting. • V erify the Macintosh you are using is running Phase 2 EtherT alk. • Compare the zone in which the OkiLAN 6100e+ appears in the Chooser to the zones searched.
VII - 12 Section 7 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Recommended Action: Unable to change the configuration at this time. T ry again. Message: “Name” @ “Zone” is not r esponding. V erify the OkiLAN 6100e+ is power ed on.
VII - 13 Section 7 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide EtherT alk or reset before it becomes idle, changes will be lost. Return to the zone selection window and search the network again to display the new information. Message: Ther e is not enough memory to perform the r equested action.
VII - 14 Section 7 - Appendix A - T r oubleshooting OKI OkiLAN 6100e+ User ’ s Guide Message: Unexpected AppleT alk error . Recommended Action: Check the network connection. T ry again. Appendix B Selecting Y our Printer T o Select Y our Printer 1. Click on the Apple in the menu bar and select Chooser .
VII - 15 Section 7 - Appendix B - Selecting Y our Printer OKI OkiLAN 6100e+ User ’ s Guide EtherT alk your printer is located. (Y ou may also need to scroll through the zones to locate the one you want.) If you do not know the zone in which your printer is located, contact your network administrator .
VII - 16 Section 7 - Appendix B - Selecting Y our Printer OKI OkiLAN 6100e+ User ’ s Guide Appendix C Capturing With a Spooler Overview T o use the OkiLAN 6100e+ with the AppleShare Print Server , follow these steps to capture the OkiLAN 6100e+. Capturing without Bypass Capturing 1.
Windows Printing Section VIII: Windows Printing.
VIII - 2 Section 8 - W indows Printing OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1 OkiLAN 6100e+ Set Up for Windows NT 4.0/2000 .......................................... VIII-3 Overview ...............................................
VIII - 3 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing Chapter 1 OkiLAN 6100e+ Set Up for Windows NT 4.0/2000 Overview This section contains instruction and information on how to set up your OkiLAN 6100e+ for a W indows NT 4.
VIII - 4 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Installation T o install OkiLAN 6100e+ Connect for TCP/IP , follow the instructions below: 1. Install the OkiLAN 6100e+ Connect for TCP/IP files - see Section I.
VIII - 5 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing 5. From the list of A vailable Printer Ports , select OKI OkiLAN 6100e+ Connect IP Monitor as the type of port to add and click New Port .
VIII - 6 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Notify When Printed This feature will provide an alert when your job is active on the printer . This may be useful if the printer is especially busy .
VIII - 7 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing Notify When Printed This feature will provide an alert when your job is active on the printer . This may be useful if the printer is especially busy .
VIII - 8 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Install LPR Print Monitor 1. Open the W indows NT Control Panel . 2. Select the Services tab. 3. Select Add , then Micr osoft TCP/IP printing . 4.
VIII - 9 Section 8 - Chapter 1 - OkiLAN 6100e Setup for W indows NT 4.0 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing 5. In the Name or addr ess of server pr oviding lpd: field, enter the IP address you assigned to the printer . 6. In the Name of printer or print queue on that server: field, enter the print server output port being used.
VIII - 10 Section 8 - Chapter 2 - OkiLAN 6100e Setup for W indows NT 3.51 OKI OkiLAN 6100e+ User ’ s Guide Chapter 2 OkiLAN 6100e+ Set Up for Windows NT 3.51 Overview This section contains information on setting up your OkiLAN 6100e+ for a W indows NT 3.
VIII - 11 Section 8 - Chapter 2 - OkiLAN 6100e Setup for W indows NT 3.51 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing files—see Section I. 2. From the W indows NT Print Manager Printer menu select Create Printer . 3. In the Cr eate Printer window select: • Printer Name • Driver • Description 4.
VIII - 12 Section 8 - Chapter 2 - OkiLAN 6100e Setup for W indows NT 3.51 OKI OkiLAN 6100e+ User ’ s Guide Using the Windows NT 3.51 LPR Print Monitor A Microsoft LPR print monitor is shipped with W indows NT 3.51. This print monitor is not included in the default W indows NT installation; therefore it will need to be installed.
VIII - 13 Section 8 - Chapter 2 - OkiLAN 6100e Setup for W indows NT 3.51 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing Assign Print Server IP Address Using OkiNet for IP , assign the print server an IP address; for example, 10.10.10.2. Note: For more information on using OkiLAN 6100e+ TCP/IP , see OkiNet for TCP/IP .
VIII - 14 Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for W indows 95/98 OKI OkiLAN 6100e+ User ’ s Guide Chapter 3 OkiLAN 6100e+ Set Up for Windows 95/98 Overview This section contains instruction and information on how to set up your OkiLAN 6100e+ for a W indows 95/ 98 environment.
VIII - 15 Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for W indows 95/98 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing 3. Select the W indows printer from which you would like to print with OkiLAN 6100e+ Connect, then select Pr operties from the File menu.
VIII - 16 Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for W indows 95/98 OKI OkiLAN 6100e+ User ’ s Guide 8. Click OK . Y ou will now be able to use OkiLAN 6100e+ Connect for TCP/IP . Whenever you print to the printer configured with OkiLAN 6100e+ Connect, your print job will go directly to the OkiLAN 6100e+ print server port.
VIII - 17 Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for W indows 95/98 OKI OkiLAN 6100e+ User ’ s Guide Windows Printing 4. Add an OkiLAN 6100e+ Connect port.
VIII - 18 Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for W indows 95/98 OKI OkiLAN 6100e+ User ’ s Guide Output Port Configuration Options T o configure the OkiLAN 6100e+ output port, select the Output Port tab. Port Number Select the port number you wish to configure.
Regulatory Information Section IX: Regulatory Information.
IX - 2 Section 9 - Regulatory Information OKI OkiLAN 6100e+ User ’ s Guide Federal Communications Commission Radio Frequency Interference Statement This equipment generates and uses radio frequency energy . If not installed and used according to the manufacturer ’ s instructions, this equipment may cause interference with radio/TV reception.
IR Printing Section X: IR Printing.
X - 2 Section X - IR Printing OKI OkiLAN 6100e+ User ’ s Guide In This Section Chapter 1: IR T ranceiver Features ........................ X-3 Specifications ................................................ X- 3 System Requirements .................
X - 3 Section X - Chapter 1 - IR T ranceiver Features OKI OkiLAN 6100e+ User ’ s Guide IR Printing Chapter 1 IR T ranceiver Features The IR T ransceiver enhances the mobility of your portable device by allowing you to walk-up and connect to a printer equipped with an OkiLAN 6100e+ print server .
X - 4 Section X - Chapter 1 - IR T ranceiver Features OKI OkiLAN 6100e+ User ’ s Guide System Requirements · OkiLAN 6100e+ Print Server with infrared port connection. · Infrared port on notebook or mobile device meeting the IrDA standard. · Infrared print drivers on the mobile device.
X - 5 Section X - Chapter 2 - Installation and Configuration OKI OkiLAN 6100e+ User ’ s Guide IR Printing Chapter 2 Installation and Configuration Installing the Hardware T o install the IR Transceiver , attach the DIN-6 connector on the back of the OkiLAN 6100e+ print server .
X - 6 Section X - Chapter 2 - Installation and Configuration OKI OkiLAN 6100e+ User ’ s Guide 6. For W indows 95 users only: Under the A vailable ports window , select either Infrar ed Printing (LPT) Port (recommended) or select the COM port labeled Infrared Serial (COM) Connections Port , then click Next .
X - 7 Section X - Chapter 3 - Using the IR T ranceiver OKI OkiLAN 6100e+ User ’ s Guide IR Printing Chapter 3 Using the IR T ransceiver Position the infrared port of your portable computer or mobile device within three feet (one meter) of the IR T ransceiver ’ s infrared window , leaving an unobstructed path between the two units.
.
Index Index A Access Rights OkiNet for VINES utility , V - 14 Advanced Configuration Options OkiLAN 6100e+ utility (EtherT alk), VII-6 Advanced Management Features HP OpenV iew , II-6 network alert, I.
Index - 2 Index OKI OkiLAN 6100e+ User ’ s Guide Custom V iews creating in OkiNet for NetW are, III- 19 in OkiNet for TCP/IP , IV - 36 in TCP/IP , II-20 D Default Gateway IP Address identifying in telnet, IV -45 DHCP assigning an IP address, IV - 10 Diagnostic Information displaying in NetW are, III- 17 DLC/802.
Index - 3 Index OKI OkiLAN 6100e+ User ’ s Guide Index H Hardware Installation, I-3 to I- 9 HP OpenV iew advanced management, II-6 HP-UX v10.xx Application prerequisites, IV -66 procedure, IV -67 HP-UX v8.07 Application prerequisites, IV -62 to IV -63 procedure, IV -63 to IV -65 HP-UX v9.
Index - 4 Index OKI OkiLAN 6100e+ User ’ s Guide O OkiLAN 6100e+ parallel output port signal assignments, I-15 print server status, I-10 OkiLAN 6100e+ Diagnostic Information displaying in OkiNet for.
Index - 5 Index OKI OkiLAN 6100e+ User ’ s Guide Index OkiNet for VINES access rights, V -14 communication options, V - 15 configuring the print server , V -16 to V -17 configuring the TCP/IP protoc.
Index - 6 Index OKI OkiLAN 6100e+ User ’ s Guide Restoring Factory Default Settings in NetW are, III-18 in TCP/IP , IV -35 in VINES, V -18 RJ45 Pin Identification, I-14 Routers, VI-4 RPrinter Mode i.
Index - 7 Index OKI OkiLAN 6100e+ User ’ s Guide Index LAN Manager/LAN Server no configuration sheet, VI- 17 unable to print, VI-17 TCP/IP BOOTP , IV -49 FTP , IV -54 gleaning, IV -49 hardware error.
Index - 8 Index OKI OkiLAN 6100e+ User ’ s Guide OkiNet for VINES utility access rights, V -14 communication options, V -15 configuring the print server , V -16 to V -17 installing, V -13 running, V.
An important point after buying a device Oki 6100E+ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oki 6100E+ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oki 6100E+ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oki 6100E+ you will learn all the available features of the product, as well as information on its operation. The information that you get Oki 6100E+ will certainly help you make a decision on the purchase.
If you already are a holder of Oki 6100E+, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oki 6100E+.
However, one of the most important roles played by the user manual is to help in solving problems with Oki 6100E+. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oki 6100E+ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
