Instruction/ maintenance manual of the product 59375102 Oki
Go to page of 12
Hard Disk Drive (HDD) Installation Instructions 59375102.
© 2007 by Oki Data Americas, Inc. A ll rights reserved. Every effor t has been made t o ensure that the information in this document is co mplete, accurate, and up-to-date. The manufacturer assumes no responsi bility for the results of er rors beyond its co ntrol.
3 Prepare the Printer 1. T urn off the printer . 2. Detach the power cord from the back of the printer . 3. Detach the interface cable from the back of the printer . 4. R emove and sav e the th umbscrews at th e top and bottom which hold the control board cover in place.
4 5. Open the control board cover by pulling out and to the left..
5 Install the Hard Disk Drive (HDD) 1. Locate the drive connector (1) on the control board:.
6 2. R emove th e hard disk drive f rom its shipping package. Caution! Observe antistat ic precautions when installing the hard disk drive. 3. Lift the handle on the HDD and insert the connector firmly into the sock et on the control boar d.
7 4. Press down on the handle to lock it in place..
8 Complete the Installation 1. Close the control board cover and reinstall the screws at the top and bottom. 2. Reattach the interface cable, then the power cord.
9 Verify the Installation Print the Configuration Report 1. Press Enter to access the printer menu. 2. Press Enter to select Configuration. 3. Press the ∇ key . 4. Press Enter to select Print Information. 5. Press Enter to select Execute. The Configuration report prints.
10 Activate the HDD in the Driver Windows ® Postscript Emulation Driver 1. First Windows Vista a. Click Start → Settings → Hardware and Sound → Printer . The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Fa x e s .
11 5. Select Installed. 6. Click OK and close the dialog box. PCL Driver 1. First Windows Vista a. Click Start → Settings → Hardware and Sound → Printer . The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Fa x e s .
12 Macintosh ® Mac OS 10.2, 10.3, 10.4 1. First OS 10.2 a. Activate Print Center: Local Hard Drive → Applications → Utilities → Print Center . OS 10.3, 10.4 a. Activate the Printer Setup Utility: Local Hard Drive → Applications → Utilities → Printer Setup Utility .
An important point after buying a device Oki 59375102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oki 59375102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oki 59375102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oki 59375102 you will learn all the available features of the product, as well as information on its operation. The information that you get Oki 59375102 will certainly help you make a decision on the purchase.
If you already are a holder of Oki 59375102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oki 59375102.
However, one of the most important roles played by the user manual is to help in solving problems with Oki 59375102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oki 59375102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
