Instruction/ maintenance manual of the product 16n Oki
Go to page of 20
1 Read Me First English OKIP AGE 16 n Read Me First 16n_gbR.pm6 16/09/96, 17:30 1.
2 Every ef fort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control.
3 Read Me First English Contents Safety Instructions ................................................................... 4 Important W iring Instructions ................................................. 5 Printer Features ............................
4 Safety Instructions Y our Oki printer has been carefully designed to giv e you years of safe, reliable performance. As with all electrical equipment, ho we ver , there are a few basic precautions you should take to av oid hurting yourself or damaging the printer: • Read the setup instructions in this book carefully .
5 Read Me First English • Do not poke anything into the v entilation slots on the printer; you could get a shock or cause a fire. • Aside from the routine maintenance described in this handbook, do not try to service the printer yourself; opening the cov er may expose you to shocks or other hazards.
6 Printer Features • LED 16ppm Page Printer • 600 x 600 dpi • HP LaserJet IV (PCL5e, HPGL/2 and PJL) compatible • Additional emulations for IBM ProPrinter IIIXL and Epson FX • 2Mb memory sta.
7 Read Me First English Optional Accessories • Second paper tray holding 500 sheets • Multi purpose feeder for up to 50 en v elopes or 100 sheets of labels, paper etc.
8 16n_gbR.pm6 16/09/96, 17:30 8.
9 Read Me First English Identifying Y our Printer Before you start setting up your printer mak e sure that it is placed on a firm, flat surf ace and out of direct sunlight.
10 Installing Y our Printer Before connecting the printer to your PC and mains outlet, you must first install the toner cartridge and insert paper in the paper tray . Note: Y our printer is shipped with the image drum cartridge alr eady installed. 1. Remov e any adhesi v e tape from the outer cov ers.
11 Read Me Fir st English 5. Peel of f the adhesi ve tape, and remo ve the foam packing tube from the toner hopper on the image drum cartridge. 6. Reinstall the image drum cartridge back into the printer , locating the pins on each end into the slots at either side of the printer .
12 Installing P aper 1. Pull do wn on the packing card under the front of the tray , and remov e it from the machine. 4. Replace the tray in the printer . The paper le v el indicator (3) provides a visual indication of ho w much paper is left in the tray .
13 Read Me Fir st English Connecting Y our Printer 1. Attach the PC interface cable to the parallel interface port (1) on your printer , and to the parallel (25-pin D- type female) port on your PC. 2. Connect the po wer cable to the printer and plug in to the mains outlet (2).
14 T op P aper Exit During normal operation paper will exit through the top of the printer , face do wn. T o f acilitate this there is a small paper support set in to the printer cov er . 1. Carefully pull this support (1) to the upright position and extend the small plastic tab (2).
15 Read Me Fir st English Front Feed T ray The front (manual) feed tray may also be used to feed up to about 100 sheets automatically . In conjuction with the rear paper exit, this method gi v es an almost straight paper path, and is therefore suitable for heavy grade paper .
16 Changing the Default Langua g e When the printer is shipped the default language is English. T o chang e this language proceed as follo ws: 1. T ake the printer off-line , press the ON-LINE button. 2. Press the MENU 1 button for more than two seconds.
17 Read Me Fir st English Installing a Windows Printer Driver Y our printer is supplied with printer dri vers fo r W indows 3.1, W indo ws 95. T o install dr i vers follo w the appropriate section belo w . Installation f or Windows 3.1x Installation for W indows 3.
18 Using an Alternative Printer Driver If no suitable dri ver is a vailable, you can use one of the follo wing emulations that may be supplied with your software.
19 Read Me Fir st English Index A Accessories .............................. 7 C Cable data interface ..................... 13 po wer ....................... 4, 5, 13 Cleaning the printer ................. 4 Components indentification ................
20 Oki Systems Compan y Oki Systems (UK) Limited 550 Dundee Road Slough T rading Estate Slough Berks SL1 4LE T el: 44 (0) 1753 819819 Fax: 44 (0) 1753 819899 16n_gbR.
An important point after buying a device Oki 16n (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oki 16n yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oki 16n - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oki 16n you will learn all the available features of the product, as well as information on its operation. The information that you get Oki 16n will certainly help you make a decision on the purchase.
If you already are a holder of Oki 16n, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oki 16n.
However, one of the most important roles played by the user manual is to help in solving problems with Oki 16n. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oki 16n along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
