Instruction/ maintenance manual of the product Regulator Equipment Oceanic
Go to page of 20
.
2 Oceanic Regulator Pay special attention to items marked with this Warning Symbol. WARNINGS: This Regulator product is intended for use by recreational divers who have successfully completed a nationally recognized course in scuba diving.
3 Owner's Guide CONTENTS W ARNINGS ................................................................................................... 2 NOTICES AND W ARRANTY ......................................................................... 2 INTRODUCTION .
4 Oceanic Regulator INTRODUCTION STATEMENT FOR OCEANIC REGULATOR EQUIPMENT COMPATIBILITY AND USE WITH NITROX WARNINGS: Oceanic Regulators are not intended to be used by untrained per- sons who may not know the inherent risks and hazards of SCUBA diving.
5 Owner's Guide NOTE: The term breathing gas used throughout this owner's guide applies to enriched nitrogen-oxygen (Nitrox) mixtures as well as compressed Air. When using Air with this regulator equipment, the Air used must meet EN132 Annex A standards.
6 Oceanic Regulator REGULATOR FIRST STAGES WARNING: Failure to prepare your First Stage properly for use in harsh environmental conditions, such as being subjected to sedi- ment or the possible buildup of ice, or salt crystals, may result in serious injury or death.
7 Owner's Guide REMOVAL OF HOSES WARNING: At least one second stage must be connected to the first stage to facilitate purging of breathing gas from the first stage. DATALINK WARNING: Proper installation of the DataLink is essential for it to function properly.
8 Oceanic Regulator NOTE: Once the DataLink has been disconnected, the regulator system can again be pressurized. REGULATOR ATTACHMENT TO A TANK WARNING: Maximum working pressure for an Oceanic Yoke s.
9 Owner's Guide DIN WHEEL STYLE CONNECTOR.
10 Oceanic Regulator DIN TO USA CONVERTER YOKE WARNING: The DIN to USA Converter is specifically designed for use with Oceanic brand first stages. Although it may fit other brand first stages, it was not designed to do so or tested for use with other brands.
11 Owner's Guide ENVIRONMENTAL PROTECTION KIT WARNING: Installation of an Environmental Kit must be per- formed by an Authorized Oceanic Dealer. Improper installation may cause first stage failure while underwater resulting in serious injury or death.
12 Oceanic Regulator Alpha 7, Gamma, Pony Bottle, and Explorers (Primary and Octopus) NOTE: If these second stages are shipped from the factory spe- cifically as an Octopus, the inhalation effort is set slightly higher to reduce sensitivity.
13 Owner's Guide Delta 3 Adjustment Knob (on side): Guidelines for Delta 3adjustments (knob on side): NOTE: Rotation of the Delta 3 adjustment knob does not rotate the poppet seat against the sealing orifice.
14 Oceanic Regulator.
15 Owner's Guide NOTE: Due to the Zeta's servo design, a hiss may be heard upon being pressurized. This is normal for the Zeta..
16 Oceanic Regulator CARE AND MAINTENANCE TRANSPORT and STORAGE POST DIVE CARE REPAIRS and SERVICE WARNING: DO NOT attempt to disassemble or repair the first or second stages, or to adjust the first stage. Doing so could cause malfunction while underwater resulting in serious injury or death.
17 Owner's Guide ADDITIONAL SPECIFICATIONS FOR CONNECTING COMPONENTS TO OCEANIC REGULATOR FIRST STAGES Second Stage (Primary or Octopus): Pressure Gauge or Pressure Transmitter:.
18 Oceanic Regulator GUIDELINE FOR OCEANIC REGULA TOR EQUIPMENT MINIMUM SERVICE INTERV A L S.
19 Owner's Guide INSPECTIONS / SERVICE Date Service Authorized Dealer / Technician RECORDS First Stage Model ________________________________ First Stage Serial# ________________________________ .
20 Oceanic Regulator © 2002 Design, 1996 Doc. No. 12-2018-r08 (6/22/06) OCEANIC WORLD WIDE OCEANIC USA 2002 Davis S treet San Leandro, CA 94577 T el: 510/562-0500 Fax: 510/569-5404 W eb site: http://www.
An important point after buying a device Oceanic Regulator Equipment (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oceanic Regulator Equipment yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oceanic Regulator Equipment - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oceanic Regulator Equipment you will learn all the available features of the product, as well as information on its operation. The information that you get Oceanic Regulator Equipment will certainly help you make a decision on the purchase.
If you already are a holder of Oceanic Regulator Equipment, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oceanic Regulator Equipment.
However, one of the most important roles played by the user manual is to help in solving problems with Oceanic Regulator Equipment. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oceanic Regulator Equipment along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
