Instruction/ maintenance manual of the product 2091112 O'Brien
Go to page of 8
Use of this product and participation in the sport involves inherent risks of injury or death. T o reduce risks: • Ski in control and do not ski at speeds that exceed the skier ’ s ability . BEGIN - NERS SHOULD USE EXTRA CAUTION. • Use correct size ski and binding.
W A TERSPORTS SAFETY CODE W atersports are fun and challenging but involve inherent risks of injury or death. T o increase your enjoyment of the sport and to reduce your risks, use common sense and fo.
W atersports can be safe and fun for all levels of enthusiasts. The Operator ’ s Manual is present - ed to enhance your enjoyment of the sport. It is intended to alert you to some of the potentially dangerous conditions that can arise in all watersports.
BINDING MOUNTING INSTRUCTIONS NOTE: It is not recommended that any extra holes are drilled into the top surface of the skis. O’Brien slalom skis have phenolic strips under the surface of the ski that help retain any screws or inserts that come in the ski.
H ORIZONT AL ADJUSTMENTS Moving the n back towards the tail of the ski increases the pressure in the forebody of the ski during the pre-turn and turn, resulting in more tip area of the ski engaging the water . This action will cause increased drag and deceleration in the pre-turn as well as larger arcing turns.
LINE-LOCK ADJUST ABLE FIN: The Line-Lock Adjustable Fin features a 3 point adjustment system to allow exact n positioning in any direction. The Line-Lock Fin is easily adjusted by loosening the 3 set screws, positioning the blade in the desired position and then tightening the 3 set screws.
NOTES FROM PLACE ST AMP HERE PO BOX 97087 REDMOND, W A 98073.
O’BRIEN CUSTOMER RETURN/W ARRANTY POLICY 1. All customer returns (warranty and non-warranty) require an approved return authorization issued by customer service or the shipment will be refused and sent back to the con sumer at the consumer’s expense.
An important point after buying a device O'Brien 2091112 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought O'Brien 2091112 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data O'Brien 2091112 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, O'Brien 2091112 you will learn all the available features of the product, as well as information on its operation. The information that you get O'Brien 2091112 will certainly help you make a decision on the purchase.
If you already are a holder of O'Brien 2091112, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime O'Brien 2091112.
However, one of the most important roles played by the user manual is to help in solving problems with O'Brien 2091112. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device O'Brien 2091112 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
