Instruction/ maintenance manual of the product QT1000 NuTone
Go to page of 9
INST ALLA TION INSTRUCTIONS READ & SA VE THESE INSTRUCTIONS! Quie T T est ® T win Blower V entilator MODELS: QT 700 & QT 1 000 FOR BEST RESUL TS Refer to Figure 1 for dimensions of the housing. When installing the ventilator in a new construction site, install housing during the rough-in construction of the building.
DUCTING OPTIONS Refer to Figures 2 and 3. The ventilators may be ducted either horizontally or vertically. As illustrated, position and secure the damper section to the housing in the desired position. MOUNTING THE HOUSING TYPICAL MOUNTING 1. Refer to Figure 4.
OPTIONAL MOUNTING METHODS The mounting brackets may be adjusted and/or moved for various types of installation. To adjust bracket position, loosen 7 ⁄ 16 " hex nuts and move brackets up or down. Re-tighten hex nuts securely. To move brackets, remove 7 ⁄ 16 " hex nuts.
FIGURE 7 FIGURE 8 FIGURE 6 DUCTING 1. Refer to Figure 6. Connect the ductwork to damper/duct connector. Tape all joints with duct tape. WIRING NOTE: All wiring connections must comply with local codes, ordinances and the National Electric Code and the ventilator must be properly grounded.
INSTRUCTIONS D'INST ALLA TION LIRE ET CONSERVER CES INSTRUCTIONS V entilateur Quie T T est ® à rotor double MODELES: QT 700 & QT 1 000 DESCRIPTION • Concu pour installation au plafond. • ATTENTION: Pour réduire le risque de décharge électrique, couper le courant avant tout entretien.
OPTIONS D'EV ACUA TION Voir Figures 2 et 3. Les ventilateurs sont prévus pour évacuation horizontale ou verticale. Placer et fixer le registre au boîtier en position voulue, comme illustré. MONT AGE DU BOITIER MONT AGE TYPE 1. Voir Figure 4. Prévoir un solide cadre de montage pour un niveau sonore le plus bas possible.
AUTRE METHODES DE MONT AGE On peut ajuster ou enlever les pattes de fixation pour divers types d'installation. Pour adjuster la position des pattes, desserrer les écrous hexagonaux de 7 ⁄ 16 po et déplacer les pattes vers le haut ou vers le bas.
FIGURE 7 FIGURE 8 FIGURE 6 GAINAGE 1. Voir Figure 6. Raccorder le registre à l'évacuation. Utiliser une bande adhésive pour tous les joints. CABLAGE REMARQUE: Tous les raccords de câblage doivent respecter les règlements locaux et le ventilateur doit être convenablement relié à la terre.
Product specifications subject to change without notice. Les caractéristiques de produits peuvent changer san prévis. 4820 Red Bank Road, Cincinnati, Ohio 45227 1140 Tristar Drive, Mississauga, Ontario, Canada L5T 1N2 Printed in U.S.A., Imprimé aux E.
An important point after buying a device NuTone QT1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NuTone QT1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NuTone QT1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NuTone QT1000 you will learn all the available features of the product, as well as information on its operation. The information that you get NuTone QT1000 will certainly help you make a decision on the purchase.
If you already are a holder of NuTone QT1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NuTone QT1000.
However, one of the most important roles played by the user manual is to help in solving problems with NuTone QT1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NuTone QT1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
