Instruction/ maintenance manual of the product 846 NuTone
Go to page of 2
READ AND SA VE THESE INST ALLA TION INSTRUCTIONS! W all Cap MODEL: 846 TERMINA TES 8" ROUND DUCT FOR WOOD W ALL INST ALL A TION Refer to Figure 1. Attach Wall Cap to outside wall with screws through four slots on side of flanges. FOR BRICK W ALL INST ALL A TION Refer to Figure 2.
Product specifications subject to change without notice. 4820 Red Bank Road, Cincinnati, Ohio 45227 Printed in U.S.A., Rev. 4/01, Part No. 13714 One Y ear Limited W arranty WARRANTY OWNER: NuTone warr.
An important point after buying a device NuTone 846 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NuTone 846 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NuTone 846 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NuTone 846 you will learn all the available features of the product, as well as information on its operation. The information that you get NuTone 846 will certainly help you make a decision on the purchase.
If you already are a holder of NuTone 846, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NuTone 846.
However, one of the most important roles played by the user manual is to help in solving problems with NuTone 846. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NuTone 846 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
