Instruction/ maintenance manual of the product DM-950 Numark Industries
Go to page of 12
DM-950 DJ Mixer Operating Instructions INSIDE THE BOX: (1) DM-950 DJ Mixer (1) DM-950 Power Adapter.
PAGE 2 SAFETY PRECAUTIONS Thank you for buying this Numark product package. Please read these operating instructions so you will know how to oper ate all of this equipment properly . After you have finished reading these instructions, k eep them for future reference.
PAG E 3 T ABLE OF CONTENTS IMPORT ANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PAGE 3 MIXER CONTROLS MIXER CONTROLS General Mixer Controls for DM-950 1. AC In and P ower Switch This mixer is compatible only with the included power cable. Connect the AC plug into the jack on the rear of the mix er (A.) The mixer should be switched on after all devices are already connected to prev ent damage to your equipment.
PAG E 4 MIXER CONTROLS B A C D E F G H 3 21 6 4 5 8 10 7 9 11.
PAGE 5 MIXER CONTROLS MIXER CONTROLS continued Input and Power Section NOTE: It is recommended that the mix er be turned off before connecting or disconnecting anything to/from the mixer . A. Power S witch and AC Jack Use only the included AC Power Adapter when oper ating this mixer .
SETUP & INSTALLATION This mixer was designed to be placed between turntables and table top CD pla yers. It is important that there is at least ¼" (7mm) between the mixer and the turntables or CD pla yers to prevent damage to the equipment and to reduce unwanted system noise.
PAGE 7 SPECIFICA TIONS SPECIFICATIONS Inputs: Line: 18K ohm input impedance 200mV rms sensitivity for 4V output Mic: 3K ohm input impedance unbalanced 2mV rms sensitivity for 4V output 20mV rms max in.
WARRANTY PAGE 8 LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S mixers are free from defe.
RETURN INFORMA TION PAG E 9 RETURN INFORMATION (US ONL Y) a) A Return A uthorization number must be obtained from Numark through the address or phone numbers below . b) A copy of the original sales receipt must also be included for the equipment to be repaired under warrant y .
TROUBLE SHOOTING PAG E 10 Mixer does not turn on. Disconnected Power Cord? Connect Power Cord. The sound level is very low . The T urntable is not connected to a device with a PHONO preamp. Connect the turntable to the input labeled PHONO, not the LINE.
Copyright Numark Industries, LLC 2002 DM950 Manual/ English INSIDE THE BOX: (1) DM-950 DJ Mixer (1) DM-950 Power Adapter.
An important point after buying a device Numark Industries DM-950 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries DM-950 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries DM-950 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries DM-950 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries DM-950 will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries DM-950, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries DM-950.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries DM-950. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries DM-950 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
