Instruction/ maintenance manual of the product 8000i North Star
Go to page of 14
Northsta r 800 0i 4 P ort USB Hu b In st al la t io n Ma nu a l w w w.n or ths t arnav . com.
1 Warning and safety information IMPORTANT SAFETY INFORMATION Please read ca refully before use This is the safety alert symbol. It is used to alert you to potential pers onal injury hazards. O bey all safety measures that follow this symbol to avoid possible injury or death.
2 Disclaimer As Northstar is continuously improving th is product we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. Please contact your nearest Northstar distributor if you require any further assistance.
Contents 1 Warning and safety information 2 2 Disclaimer 3 3 Warranty 3 4 Northstar 8000i 4 Port USB Hub 5 5 What comes with your 4 Port USB Hub 7 6 Installation 8 7 Specification 11 8 Maintenance 11 .
4 Northstar 8000i 4 Port USB Hub The Northstar 8000i 4 Port USB Hub co nnects up to four (4) optional USB accessories to a Northstar 8000i System. Fit a 4 Port USB Hub if your Northstar 8000i System processor does not have enough USB ports.
A POWER LED The Red LED indicated that the unit has power an d is turned on B PORT LEDs The LEDs indicate the operational status of the port C Panel Mounting Holes Use the holes to mount unit 6 Norths.
5 What comes with your 4 Port USB Hub 4 Port USB Hub NS0047 20 Large Protective Caps x 5 CN0002 22-G Mounting Screws x 6 HR000087 Power Cable AS000453-G USB Cable A-B NS004808 This Manual MN000488D-G .
Registration Card Mounting Template LA0005 91A-G 6 Installation Read and observe the Warnings and Notices in the Northstar 8000i System Installation Manual.
Use the screws supplied to screw the case to the panel. The unit and all connectors are waterproof. T he unit screws to a vertical panel with the connectors facing down. Form the cables into loo ps below the unit so that any condensation will drip off.
Turn the unit’s power supply and the No rthstar 8000i System on. Check that the unit’s power supply LED is turns red. Chec k that the LEDs on the ports that have accessories connected are green. If an LED is yellow then disconnect that accessory because it is drawing too much power supply current.
7 Specification Power supply: 10 V to 35 V DC, 18 W maximum. Operating temperature: 5ºF to 131ºF (-15ºC to 55º C). USB port to No rthstar 8000i System: USB 2.0 and 1.0, 1. 1 compliant. USB accessory ports: USB 2.0 and 1.0, 1.1 compliant. Four ports, type A.
9 Technical support, service and repairs Northstar products are manufactured and serviced by BNT Marine Electronics. The product is covered by a warranty whic h is supplied as a separate document.
UNITED STATES 30 Sudbu r y Roa d, Acton, MA 01720, United States Ph: +1 978.897.6600 F ax: +1 978.897.7241 sales@bntma rin e.com EUROPE Unit 2, Ocean Quay , Belvide re R d, Sou thampt on, SO14 5 QY , England Ph: +44 2380 339922 F ax: +44 2380 330345 no r thstaruk@northstarnav.
w w w .no r th sta rna v .c om Made in New Zealand MN000488D-G Nor thsta r 80 00 i 4 P or t USB Hub Install ation Man ual.
An important point after buying a device North Star 8000i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought North Star 8000i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data North Star 8000i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, North Star 8000i you will learn all the available features of the product, as well as information on its operation. The information that you get North Star 8000i will certainly help you make a decision on the purchase.
If you already are a holder of North Star 8000i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime North Star 8000i.
However, one of the most important roles played by the user manual is to help in solving problems with North Star 8000i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device North Star 8000i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
