Instruction/ maintenance manual of the product 100 Chassis Nortel Networks
Go to page of 10
Part No. 893-00940-A July 1996 Installing the P o wer Suppl y f or the Centillion 100 Chassis C100PS.Bk Page i Friday, May 9, 1997 1:54 PM.
ii 893-00940-A © 1996 by Bay Networks, Inc. All rights reserv ed. T rademarks Bay Networks, Bay Networks Press, and Centillion 100 are trademarks of Bay Netw orks, Inc. Other brand and product names are registered trademarks or trademarks of their respecti ve holders.
893-00940-A 1 Caution: Please read immediately Inspect this po wer cord and determine if it provides the proper plug and is appropriately certified for use with your electrical system.
Installing the Power Supply for the Centillion 100 Chassis 2 893-00940-A Attenzione: Leggere attentamente Controllare questo cav o di alimentazione, verificarne il colle gamento con la presa appropriata nonché la certificazione per l'uso nell'impianto elettrico posseduto.
Adding a Power Supply 893-00940-A 3 Adding a P ower Suppl y Required tool: Flat-tip scre wdriv er 1. Use the flat-tip scre wdriv er to loosen the two scre ws; then remov e the filler panel from the chassis. 2. Align the ne w power supply with the slot guides and slide the po wer supply into the chassis.
Installing the Power Supply for the Centillion 100 Chassis 4 893-00940-A 3. Push do wn on the power supply handle to align the scre ws and tighten the scre ws to between 2 and 4 inch-pounds of torque. Do not ov ertighten. 4. Connect the po wer cord to the power supply and then to the w all.
Replacing a Power Supply 893-00940-A 5 Replacing a P ower Supply Required tool: Flat-tip scre wdriv er 1. T urn off the po wer to the faulty po wer supply and unplug the cord. 2. Use the flat-tip scre wdriv er to loosen the two scre ws; then remov e the po wer supply from the chassis.
Installing the Power Supply for the Centillion 100 Chassis 6 893-00940-A 3. Align the ne w power supply with the slot guides and slide it into the chassis. 4. Push do wn on the power supply handle to align the scre ws and tighten the scre ws to between 2 and 4 inch-pounds of torque.
Replacing a Power Supply 893-00940-A 7 5. Connect the po wer cord to the power supply and then to the w all. (See power cord caution on page 1.) 6. T urn on the power . V erify that the upper (green) LED lights. For detailed instructions, refer to Installation and Refer ence for the Centillion 100 Chassis.
Installing the Power Supply for the Centillion 100 Chassis 8 893-00940-A Specifications The follo wing table provides the specifications for the po wer supply . Electrical Line frequency: Volt Amperes rating: Input voltage: Input current rating: Fuses: 47 to 440 Hz 250 VA 90 to 132 V or 180 to 264 V 5/2.
An important point after buying a device Nortel Networks 100 Chassis (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nortel Networks 100 Chassis yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nortel Networks 100 Chassis - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nortel Networks 100 Chassis you will learn all the available features of the product, as well as information on its operation. The information that you get Nortel Networks 100 Chassis will certainly help you make a decision on the purchase.
If you already are a holder of Nortel Networks 100 Chassis, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nortel Networks 100 Chassis.
However, one of the most important roles played by the user manual is to help in solving problems with Nortel Networks 100 Chassis. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nortel Networks 100 Chassis along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
