Instruction/ maintenance manual of the product BSD Nortec
Go to page of 12
STEAM DISTRIBUTORS ASD / BSD / CSD Steam Distribution Installation Manual IMPORTANT: Read and save this guide for future reference. This guide to be left with equipment owner.
Table Of Contents INSTALLATION .....................................1 RECEIVING & UNPACKING EQUIPMENT .....................1 PRE-INSTALLATION .................................1 STEAM LINE INSTALLATION ............................1 GUIDELINES .....
INSTALLATION RECEIVING & UNPACKING EQUIPMENT 1. Check packing slip to ensure ALL material has been delivered. 2. All material shortages are to be reported to Walter Meier (NORTEC) within 48 hours from receipt of goods. Walter Meier (NORTEC) assumes no responsibility for any material shortages beyond this period.
Chart #3 Recommended Condensate line at distributor(s) CONDENSATE RETURN GUIDELINES FOR MAIN STEAM LINES 1. Use vertical condensate leg of distributor only. Do not over-tighten clamp. 2. Drip stations on steam mains must be located at all low points in the system, at each elevation change and or directional change.
-3- NHB, NHP , NHMC, RESDELUX ONL Y T o be 2” (50mm) longer then duct static pressu re or minimum. T o be 2” (50mm) longer then duct static pressu re or minimum. 6 ” m i n ( 1 5 0 m m ) 12” (300 mm) 1 2 ” ( 3 0 0 m m ) min. 2º min. 10º Nortec Humidifiers All Models min.
-4- -4 5 º GO T O 1 2 3 C2 +4 5 º 1x B Always align distributor holes so that steam is discharged upwards to ensure condensate will remain in the distributor .
-5- C1 D GO T O ¿ 3.6 mm 81- ... 81-... 61-... 41-... 4 3 m m 6 1 m m 61-... / 41-... ¿ 3 . 6 m m 8 1 - . . . 6 1 - . . . / 4 1 - . . . H X XM i n . HM i n .
-6- C2 D GO T O Always align distributor hole s so that steam is discharged upwards to ensure condensate will remain in the distributor . H 1/ 3W 2/ 3W W 1/ 3W 1/ 3W 1/ 3W 1/ 3W Min.
-7- #10 S c r e w U s e s e l f t appi n g s c r e w s . GO T O E D Figure #6 Distributor Mounting - Horizontal & Vertical Flow E 5/16” 5/16” unc Support Bracke t by Others Mandatory for Distributors longer than 36” (915mm).
-8- ASD & BSD 1506162- Distributor End Cap Assembly CSD 1506164 - Distributor End Cap Assembly Distributor Core Exploded Views December 18, 2002 ASD & BSD 1506161- Distributor Inlet Assembly C.
LIMITED WARRANTY Walter Meier Inc. and/or Walter Meier Ltd. (hereinafter collectively referred to as THE COMPANY), warrant for a period of one year from date of shipment, that THE COMPANY’s manufactured and assembled products, not otherwise expressly warranted, are free from defects in material and workmanship.
Walter Meier (Climate USA) Inc. 826 Proctor Avenue, Ogdensburg, New York 13669 Walter Meier (Climate Canada) Ltd. 2740 Fenton Road, Ottawa, Ontario K1T3T7 Tel: 866 NORTEC 1 Fax: 613 822 7964 nortec@humidity.
An important point after buying a device Nortec BSD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nortec BSD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nortec BSD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nortec BSD you will learn all the available features of the product, as well as information on its operation. The information that you get Nortec BSD will certainly help you make a decision on the purchase.
If you already are a holder of Nortec BSD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nortec BSD.
However, one of the most important roles played by the user manual is to help in solving problems with Nortec BSD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nortec BSD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
