Instruction/ maintenance manual of the product 4083 Nissan
Go to page of 6
1 ’98-’99 Frontier – Kit# 4083 INSTALLATION INSTRUCTIONS 98-99 NISSAN FRONTIER 4 WD KIT # 4083 WARNING Installation of a Performance Accessories body lift will change the center of gravity and the handling characteristics of the vehicl e.
2 ’98-’99 Frontier – Kit# 4083 1. Read all warnings and instructions completely and carefully before you begin. Check the kit for proper contents (refer t o the part’s list).
3 ’98-’99 Frontier – Kit# 4083 screws are accessed through the wheel well. Remov e the four bolts that mount the front bumper to the frame. Remove the bumper from the vehicle. 13. Remove the tabs that hold the fender well flaps to frame. This will prevent flaps from being damaged while lifting.
4 ’98-’99 Frontier – Kit# 4083 made earlier. One by one remove each bed-mounting bolt. Remove bed-mounting bolts, one at a time, apply Loctite, reinstall bolt and tighten to vehicle torque specifications.
5 ’98-’99 Frontier – Kit# 4083 securely. Replace the fuel cap. WARNING A certified welder should perform all welding. 30. Lengthen the transmission sh ift lever. Scribe a line along the side of the shift lever below the bend. Be extremely c areful during th is procedure to not damage any of the parts that are attached to the shift levers.
6 ’98-’99 Frontier – Kit# 4083 39. Double-check the vehicle. Check all mounting hardware to be sure that it is properly tightened. Check all wires, hoses, cables, etc. to be sure that there is ample slack. Check the vehicle electrical system. Start the vehicle.
An important point after buying a device Nissan 4083 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nissan 4083 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nissan 4083 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nissan 4083 you will learn all the available features of the product, as well as information on its operation. The information that you get Nissan 4083 will certainly help you make a decision on the purchase.
If you already are a holder of Nissan 4083, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nissan 4083.
However, one of the most important roles played by the user manual is to help in solving problems with Nissan 4083. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nissan 4083 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
