Instruction/ maintenance manual of the product 350Z Nissan
Go to page of 32
2008 350Z QUICK REFERENCE GUIDE SHIFT _ obsession.
INSTRUMENT BRIGHTNESS CONTROL TRIP COMPUTER/MODE SETTING BUT - T ONS HEADLIGHT AND TURN SIGNAL CON- TROL WINDSHIELD WIPER/W ASHER SWIT CH STEERING WHEEL SWIT CHES FOR AU- DIO CONTROL/BLUET OO TH 姞 C.
T ABLE OF CONTENTS Remote K eyless Entry System .......................... 2 Windshield Wiper/W asher Switch ....................... 2 Headlight and T urn Signal Control ....................... 3 RPM Shift Indicator (manual transmission only) ........
REMOTE KEYLESS ENTRY SYSTEM LOCK DOORS Press the button to lock all doors. UNLOCK DOORS Press the button once to unlock the driver’s door only . Press the button again within 5 seconds to unlock all doors. RELEASING TRUNK LID Press and hold the trunk release button for longer than 0.
Mist (MIST) – Lift the lever up for one sweep of the front wipers. Rear Wipers (REAR) – T wist the end section to operate the first (INT) or second (ON) speed settings for the rear wipers. 䡲 The washer function activates the washer fluid and several sweeps of the wipers: ● For FRONT W ASHER, pull lever toward you.
RPM SHIFT INDICATOR (manual transmission only) The engine RPM shift indicator light (REV) is located in the tachometer . When driving, it indicates ‘shift point’ , or time to up-shift. 䡲 Set or deactivate the engine RPM shift point using the trip computer display .
CRUISE CONTROL (if so equipped) 䡲 T o activate the cruise control, push the ON·OFF switch. The indicator light in the instrument panel will illuminate. 䡲 T o set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it.
AUTO CLIMATE CONTROL AUT O MODE T urn both the fan speed control dial and the air flow control dial to the AUT O positions . Then turn the temperature control dial to the desired temperature. This will allow the fan speed, air flow distribution and temperature to be automatically maintained.
DEFROSTING/DEFOGGING REAR WINDOW AND OUTSIDE HEA TED MIRROR Push the rear window defroster switch on. Push the switch again to manually turn the defroster off. This function automatically turns off in approximately 15 minutes. A/C ON/OFF BUTT ON Press the A/C button to manually turn the A/C on or off.
FM/AM/XM 姞 * RADIO WITH CD CHANGER (if so equipped) LOAD BUTT ON 䡲 LOAD A SINGLE DISC - Press the button for less than 1.5 seconds. Select the loading slot by pressing one of the CD insert select button ( 1 - 6 ) , then insert the CD. 䡲 LOAD UP T O 6 DISCS - Press and hold the button for more than 1.
AUDIO BUTT ON T o adjust the Bass, T reble, Fade, Balance, and Audio Pilot, press the AUDIO button until the desired mode appears in the display . Then press the TUNE/REW/FF button to adjust to the desired level.
FM/AM/XM 姞 RADIO WITH CD CHANGER (if so equipped) 䡲 Press and hold the RPT button for approximately 2 seconds until the clock display starts to flash. 䡲 Press the SEEK/TRACK button to adjust the hours. 䡲 Press the TUNE/REW/FF button to adjust the minutes.
WHEN SHIFTING DOWN Move the shift selector lever to the – (down) side. (Shifts to lower range.) 䡲 In manual shift mode, the transmission automatically shifts down to M1 (first) before the vehicle comes to a stop. When accelerating again, it is necessary to shift to the desired range.
T RACTION CONTROL SYSTEM (TCS) OFF SWITCH (if so equipped) The vehicle should be driven with the T raction Control System (T CS) on for most driving conditions. T CS reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor.
SEAT BELT WARNING LIGHT AND CHIME 䡲 The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition key is turned to the ON or ST ART position and remains illuminated until the driver’s seat belt is fastened.
POWER WINDOWS The power windows operate when the ignition key is in the ON position, and for about 45 seconds after the ignition key is turned to the OFF position. AUTOMATIC ADJUSTING FUNCTION: The front door power windows have an automatic adjusting function.
SOFT T OP OPERATION Before opening or closing your soft top, refer to the Owner’s Manual for detailed W arnings and Cautions regarding soft top operation. Open the top: 1. Make sure the area is clear of ob- structions and that there is at least 6 feet of clearance above the vehicle.
HOMELINK 姞 UNIVERSAL T RANSCEIVER (if so equipped) SYSTEM OPERATING TIPS 䡲 Garage doors, electrical gates, entry doors, etc. will be activated during programming. T o avoid injury, make sure that people and objects are clear of all doors or gates during programming.
7. Quickly within 30 seconds of pressing and releasing the garage door opener program button, firmly press and release the HomeLink 姞 button you’ve just pro- grammed. Press and release the HomeLink 姞 button up to three times to complete the training.
PAIRING PROCEDURE NO TE: The vehicle must be stationary when pairing the phone. 1. Press the button on the steering wheel and wait for the tone. 2. Say “Setup.” 3. Wait for the tone, then say “Pair phone.” 4. Wait for the tone, then say “New phone.
7. Say “Store” when you are finished entering numbers. The system confirms the name, location, and number. 8. Say “Y es” or “No” when the system asks if you would like to store another location for the same name. If you do not respond to the system prompt, the system ends the New Entry session.
BASIC FUNCTIONS ST ART -UP SCREEN 䡲 Read the precautions carefully , highlight the “OK” key using the joystick and press the ENTER button. NA VIGA TION DISPLA Y SCREEN 䡲 Displays navigation features and map. DISABLED WHILE DRIVING 䡲 Not all features can be manually operated while the vehicle is in motion.
SETTING BUTT ON 䡲 Press the SETTING button to change or set navigation preferences. DEST (DESTINA TION) BUTT ON 䡲 Press the DEST button to display the address book and alternative ways of pro- gramming a destination. MAP BUTT ON 䡲 Press the MAP button to display the current location map screen.
CANCEL BUTT ON 䡲 Press the CANCEL button to return to the map screen or cancel the route that has already been set. SWITCHING THE MAP VIEW 䡲 Press the MAP button . The current loca- tion map screen is displayed. 䡲 Press the ENTER button. 䡲 Highlight the “Map View” key and press the ENTER button.
SELECTING A MENU SCREEN 1. T o select a preferred menu key , use the joystick to highlight the corresponding key on the screen and press the ENTER button. 2. Depending on the key you selected, a detailed menu screen, a character input screen or a setting screen, etc.
䡲 Moving the joystick right or left, adjust your home location if necessary . After adjusting the location, press the ENTER button. 䡲 Y our home is displayed at the center of the map. A confirmation message is displayed, and the system sets your home as the destina- tion.
䡲 The selected destination is displayed at the center of the map. Highlight the “OK” key and press the ENTER button after confirming the location of the displayed destination. The sys- tem sets the destination to the selected loca- tion and starts calculating a route.
䡲 The selected destination is displayed at the center of the map. Highlight the “OK” key after confirming the location of the displayed desti- nation, and press the ENTER button. The sys- tem sets the destination to the selected loca- tion and starts calculating a route.
MEMO.
MEMO.
MEMO.
SHIFT _ Nissan, the Nissan Brand Symbol, ⬙ SHIFT_ ⬙ tagline, Z and Nissan model names are Nissan trademarks. © 2007 Nissan North America, Inc. QR8E-0Z33U0 Printing: August 2007 (13).
An important point after buying a device Nissan 350Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nissan 350Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nissan 350Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nissan 350Z you will learn all the available features of the product, as well as information on its operation. The information that you get Nissan 350Z will certainly help you make a decision on the purchase.
If you already are a holder of Nissan 350Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nissan 350Z.
However, one of the most important roles played by the user manual is to help in solving problems with Nissan 350Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nissan 350Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
