Instruction/ maintenance manual of the product VCS HUB8 Niles
Go to page of 4
INST ALLA TION & OPERA TION GUIDE B LENDING H IGH F IDELITY AND A RCHITECTURE ® Niles Audio Corporation www .nilesaudio.com 12 33 1 S.W . 1 30 Street M iami, Florida 33 186 T el: (305) 238-4373 Fax: (305) 238-0 185 © 2003 Niles Audio Corporation.
INTRODUCTION The VCS HUB8 is a speaker distribution hub that mounts in a structured-wiring cabinet or on a wall. It connects between the speaker -level output of an amplifier or receiver and the Niles volume controls that adjust the sound level of your speakers.
CAUTION! Every speaker pair in the system must be con- nected to an impedance-magnifying volume control and set to the same magnification. When you install the VCS HUB8 and connect the volume controls to it, doublecheck the switches on the volume controls to verify that they are set correctly for the impedance load of your speakers.
the screws to the mounting surface. T AKE CARE NOT TO OVERTIGHTEN THE SCREWS, WHICH COULD DAMAGE THE HOUSING. 3. Locate the connector plugs (and remove them if they are plugged in). 4. Strip 1 /4" of insulation from the end of each wire. Tightly twist the end of each wire until no frayed ends remain.
An important point after buying a device Niles VCS HUB8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles VCS HUB8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles VCS HUB8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles VCS HUB8 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles VCS HUB8 will certainly help you make a decision on the purchase.
If you already are a holder of Niles VCS HUB8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles VCS HUB8.
However, one of the most important roles played by the user manual is to help in solving problems with Niles VCS HUB8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles VCS HUB8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
