Instruction/ maintenance manual of the product IR-KIT Niles
Go to page of 20
PLASMA PROOF IR REPEA TER KIT IR-KIT For Receiving and Routing Infrared Commands from Any Remote Control to Concealed Audio/Video Equipment INST ALLA TION & USER GUIDE.
IR-KIT PLASMA PROOF IR REPEA TER KIT T ABLE OF C ONTENTS Features ............................................................................................................................1 Product Overview ..........................................
1 FEA TURES IR-CB2 n Provides two IR Receiver inputs and five IR Emitter outputs n Selectable high/low emitter outputs for use with IR-E1HO high output emitter or single and dual emitters n LED power .
PRODU CT O VERVIEW 2 1 3 7 4 2 6 5 IR-CB2 IR-SMR IR Blocking Cover Infrared T ransparent Housing 1 0 fe et o f 2 - conductor 24- gauge connecting wire 3.
1. 12V DC Jack – Provides 12V olt DC power to IR-CB2 via a regulated power supply . 2. IR Emitter Outputs – 3.5mm jacks provide output for either single or dual low-level flashers.
4 P A CKA GE C ONTENTS n IR-CB2 x 1 n Snap and Lock Connectors x 2 n In-line power supply x 1 n Self-adhesive rubber feet x 4 n IR-SMR Receiver x 1 n Adhesive-backed strip for mounting x 1 n IR-E1 Emi.
5 INS T ALLA TION 1. Select an appropriate location for the IR-CB2. 2. Run all the necessary wiring to the IR-CB2. Label the wires for future reference. 3. Plug the supplied 12V DC power supply into the un-switched AC outlet. 4. Plug the 12V DC power supply connector into the IR-CB2 socket marked POWER.
JobSite IR-E1 Emitters IR-SMR Receiver Home Theater Plasma Display 12V DC Power Supply (Not Supplied) plugged into the S witched Outlet Home Theater Receiver Satellite Receiver Cable TV Receiver DVD P.
7 P o w er Status Y ou can send a Power Status signal to IR-SMR receiver by connecting a 12V DC power supply from the switched AC power outlet of the preamp/receiver to the status input jack of your IR-CB2. Any 12V DC power supply with a minimum of 100mA current capacity can be used.
8 OPERA TION T est your IR Repeater system by following three principal guidelines: 1. All components can be operated: T est all of your remote controls for all of your equipment. 2. Operation is consistent: A good test is to repeatedly step from Pause to Play with your VCR, CD, DVD, or T ape player remote control.
9 TROUBLESHOO TING Bad Connections or Wiring If the connections or wiring are wrong, loose, shorted or open, the system will not operate properly . The symptoms could include: Power LED flickers or is off, IR T est LED is continuously flickering or on without any remote control use, intermittent operation or no operation.
10 Optical or Electr omagnetic Interference Direct sunlight, reflections, neon signs and other sources of infrared light or television sets, light dimming controls and other sources of electromagnetic fields can induce noise and interference into your IR repeater system.
11 SPECIFIC A TIONS IR-CB2 IR system: W orks with practically all brands of IR remote controls Connections: 2 receiver inputs, 5 emitter outputs Wiring requirements: Category 5 or better Home runs req.
12 SPECIFIC A TIONS (CONTINUED) IR-E1 IR system: W orks with practically all brands of IR remote controls IR transmitting: 4' (line of sight) Emitters mount directly to the IR window of a component Wiring requirements: 10' of 2-conductor 24-gauge wire with a 3.
13 LIMITED W ARRANTY JobSite Systems (“JOBSITE”), a Niles Audio Corporation company , warrants its passive products (those not requiring AC or battery power) to the original purchaser to be free of manufacturing defects in material and workmanship for a period of ten years from date of purchase.
14 If the above conditions are met, the purchaser’ s sole remedy shall be to return the product to JOBSITE, in which case JOBSITE will repair or replace, at its sole option, the defective product without charge for parts or labor .
15 NO TES:.
16 NO TES:.
17.
JOBSITE SYSTEMS 12331 S.W . 130 STREET , MIAMI, FLORIDA 33186 P 866.4JB.SITE (866.452.7483) – F 305.238.0185 WWW .JOBSITESYSTEMS.COM © 2005 JobSite Systems. All rights reserved. JobSite, Pure Custom and Niles are registered trademarks of Niles Audio Corporation and the JobSite Logo is a trademark of Niles Audio Corporation.
An important point after buying a device Niles IR-KIT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles IR-KIT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles IR-KIT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles IR-KIT you will learn all the available features of the product, as well as information on its operation. The information that you get Niles IR-KIT will certainly help you make a decision on the purchase.
If you already are a holder of Niles IR-KIT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles IR-KIT.
However, one of the most important roles played by the user manual is to help in solving problems with Niles IR-KIT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles IR-KIT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
