Instruction/ maintenance manual of the product Infrared Sensor Expansion Hub IRH610 Niles
Go to page of 8
INST ALLA TION & OPERA TION GUIDE B LENDING H IGH F IDELITY AND A RCHITECTURE ® IRH 6 1 0 IRH 6 10 INFRARED SENSOR EXP ANSION HUB DS00351ACN_IRH610.
Introduction The IRH610 is an infrared sensor expansion hub that mounts in a structured- wiring cabinet or on a wall. It connects between the output of an infrared sensor and a Niles main system unit. Niles IR repeating systems are made up of three building blocks: • IR Main System Unit—Models MSU140, MSU250, MSU480 and MSU440Z.
Features and Benefits The IRH610 offers a number of improvements over other infrared expansion hubs: • Rustproof, weather-resistant housing of high- impact, injection-molded plastic.
Mounting Location The IRH610 is specifically designed to conveniently fit into a structured wiring cabinet with snap-in “Christmas T ree” plugs or it can also be wall mounted in an unobtrusive location. Installation 1. Run all necessary wiring to the IRH610.
I NFRARED S ENSOR E XP ANSION H UB 4 OUTPUT TO MSU POWER STA TUS +12V DC IRH6 10 IR EXPANSION HUB INPUT 1 INPUT 4 INPUT 5 INPUT 6 INPUT 2 INPUT 3 1 2VDC Power supply (not supplied) plugged into an out.
I NFRARED S ENSOR E XP ANSION H UB 5 7. Plug the connectors into the IRH610 as shown. (Figure 2) The single connector plug at the upper right is the output to the main system unit. The other connector plugs are the inputs, each leading from a specific infrared sensor .
6 I NFRARED S ENSOR E XP ANSION H UB Specifications Mounting In a structured-wiring cabinet, using convenient snap-in “Christmas tree” plugs (supplied) On a wall or other flat sur face, secured wi.
Niles Audio Corporation www .nilesaudio.com 1 23 3 1 S. W . 1 30 Street Miami, Florida 3 3 1 86 T el: (305) 238-43 73 Fax: (305) 238-0 1 85 © 2004 Niles Audio Corporation. All rights reserved. Niles, the Niles logo, and Blending T echnology and Architecture are regis- tered trademarks of Niles Audio Corporation.
An important point after buying a device Niles Infrared Sensor Expansion Hub IRH610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Infrared Sensor Expansion Hub IRH610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Infrared Sensor Expansion Hub IRH610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Infrared Sensor Expansion Hub IRH610 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Infrared Sensor Expansion Hub IRH610 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Infrared Sensor Expansion Hub IRH610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Infrared Sensor Expansion Hub IRH610.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Infrared Sensor Expansion Hub IRH610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Infrared Sensor Expansion Hub IRH610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
