Instruction/ maintenance manual of the product SS-6 Niles Audio
Go to page of 8
Niles Audio Corporation www.nilesaudio.com 12 33 1 S. W . 1 30 Street M iami, Florida 3 3 1 86 T el: (305) 238-43 73 Fax: (305) 238-0 1 85 ® ©2004 Niles Audio Corporation. All rights reserved. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation.
Introduction The SS-4/SS-6 allows you to connect multiple pairs of speakers to your stereo receiver or amplifier and play any pair, any combination of pairs, or all pairs simultaneously.
Installation Considerations SS-4/SS-6 Power Handling The SS-4/SS-6 is designed for use with a receiver or amplifier having a maximum power output of 100 watts per channel at 8 ohms. Damage caused by the use of a higher-power receiv- er or amplifier will void the warranty.
Avoiding Interference Speaker wires can act as an “antenna” for electrical noise. Locating speaker wires too close to a light dimmer or switch may cause a “buzzing” or “popping” sound to be heard through the speakers.
8 S PEAKER S ELECTION S YSTEM SS-4 SPEAKER SELECTION SYSTEM 123 4 PROTECTION AMPLIFIER SPEAKER 4 SPEAKER 3 SPEAKER 2 SPEAKER 1 Niles Audio Corporation Miami, Florida USA Recessed areas for custom room labels. Attractive low-profile design. Simple push-button operation.
Operation There are two ways to use the SS-4/SS-6. You may play one pair of speakers at a time, or play multiple pairs simultaneously. If you intend to play more than one pair of speakers at the same time, you will need to become familiar with the opera- tion of the SS-4/ SS-6’s Protection button.
4. Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maximum) listening level. Be careful not to overdrive or “clip” your amplifier. If the sound becomes muddy or distorted, you have reached the limit of your ampli- fier's volume capability and should quickly reduce the volume to avoid damaging your speakers.
3. Locate the on/off buttons on the SS-4/SS-6 which correspond to the speaker pairs you wish to play. Set them to the ON position. 4. Turn on the amplifier or receiver and select a source, such as the tuner or CD player. 5. Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maximum) listening level.
An important point after buying a device Niles Audio SS-6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Audio SS-6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Audio SS-6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Audio SS-6 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Audio SS-6 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Audio SS-6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Audio SS-6.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Audio SS-6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Audio SS-6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
