Instruction/ maintenance manual of the product DVR-2100 Astar
Go to page of 24
D VR-2100 D VD RECORDER DVD + ReW ritable Manufactured under license from Dolby Laboratories."Dolby", "Pro Logic"and the double-D symbol are trademarks of Dolby Laboratories.Confidential Unpublished Works. 1992-1997 Dolby Laboratories,Inc.
46 Technical Specifications Audio Specifications T echnical Specifications Output Input Audio level:1.0~2.0 Vrms (10k ohm load) Frequency response: 4Hz~44KHz (2dB) S /N ratio 90dB Audio distortion+noise -65dB(1KHz) Audio Level 2.
45 Te chnical Specifications T echnical Specifications Supported disc formats DVD,DVD+R/RW , DVD-R/R W, SVCD, VCD, CD-DA, MP3, JPEG Supported recordable disc formats DVD+R DVD+RW Recording format DVD .
44 Before contacting service personnel, please check possible causes according to the following instructions. Symptom Possible Cause Remedy No Power 1.Power supply not connected; 2.Bad contact between the power plug and the receptacle; 3. The power of the receptacle is of f.
43 1 Date (mm/dd/yy) 01/01/00 Time (HH: MM: SS) 14:06:11 System Setup Time System Clock Settings 1.Enter the System Setup mode. 2.In the system setup control bar menu, use the or button to move the cursor to the CLOCK item and press the SELECT button.
42 Note Be sure to connect the antenna properly before the channel scan operation . Ma ke s ure ther e are TV signals at the TV Signal In put. For t he connec tion chart, please see the Basic Information: System Connection for Recording External Signals for reference.
40 Basic Information T erms DVD disk DVD disk is a highly compact device for storing. The high quality audio and video information is shored in it after being compiled in MPEG-II format. There are 4 types of DVD disks such as bosseyed single-layer DVD-5 with capacity of 4.
41 7 Chapter It refers to the subtitle of the title of each division of the DVD image or music. Normally one title contains several chapters. And each chapter has its own mark number so that it can be searched easily.
39 System Setup Recording Setting 1 Automatic Chapter Marker Default Quality ON SP System Setup Recor ding 1 Automatic Chapter Marker Default Quality ON ON OFF 1 Automatic Chapter Marker Default Quali.
38 System Setup 3. Select the Rating Level list box, and press the Factory button to drop down a menu as shown in the right chart. 4. Use the or button to select an authorization level (Off, 8: Adult.
37 1 1 System Setup PLAYBACK System Setup PLAYBACK Settings 1. Enter the System Setup control menu. 2. Use the or button to select the PLAYBACK item. 3. Press the SELECT button to enter the Play Setting mode. The following chart is the Play Setting main menu.
36 System Setup Screen Saver The Screen Saver function means that when the unit is idle (or without monitored output) for some time, some interesting picture screen saver picture s wil l app ear a utom atic ally. 1. In the G eneral S ettings menu, us e the or button to move the cursor and select the Screen Saver item.
1 1 To satisfy customers with different characteristics and suit related devices of dif ferent qualities, the unit provides various functions. Y ou can setup the system of the unit and regulate its operations to meet your taste and suit well with other related devices of yours.
RECORDER FRONT DIGITAL Vidicon The thick side is downward OPEN/CLOSE SOURCE STOP PLAY DV INPUT VIDEO L---- AUDIO ----R RECORD DVR-2100 STANDBY/ON DVD + ReWritable USB 13 System connection for recording external signals (front panel signal When connecting with external signals, be sure to switch off the power source of the unit and other devices.
TV monitor Front A V Rear A V Rear S DV DVD Play Press8 1 2 3 4 5 6 Monitoring Mode Introduction In Monitoring Mode, the system only displays external signals (CVBS,S-VIDEO,DV ,TV ,Y/Cb/Cr) selected by the user on the TV screen directly without conducting other operations.
1 2 3 4 5 6 7 8 9 Recording Mode Introduction There are various external signal inputs in the unit, including S-Video, composite video, TV tuning , DV input and stereo audio input. Y ou can select any group of audio and video signals from these inputs for recording.
Recording(DVD+R) MODE New Title SOURCE DV QUALITY SP RECTO DVD+VIDEO TRICK Record TITLE 04/04 CHAPTER 02 TIME 0:06:02/1:57:18 Recording Mode Manual Recording Start Recording 1.
17 2. Use the corresponding function keys of the remote controller, such as RECORD , PAUSE/STEP and STOP to select from Record , Pause and Stop functions in the recording process. When a Stop operation is done, the system will write some information into the disc.
Timer Recording 18 This function enables the unit to start recording according to the preset requirement once the scheduled time is reached. After the recording is done, the unit is in standby status. T o start timer recording, set up a recording schedule at first and configure the system according to the requirement.
19 a. If you select Weekly , press the SELECT button to confirm. Move the cursor to the right control unit in the row, and press the SELECT button to pop up a week lis t, as shown in the chart. Select a proper value according to your need. b. If you select Daily press the SELECT button, the date input editor box will appear on the right.
1 2 3 4 5 6 7 8 20 Introduction For finalized discs, every title is made of only one chapter. There is no such function as selected chapter play or random programmed play of disc segments for such discs. The index icon of each title is determined by the system.
21 3.Press the SELECT button to make title selection option editable. 4.Enter the number of the title to be edited with number butto ns, and then pre ss the SELECT button, the sys tem will play the title. At this time, various operations can be done for this title.
1 1 1 2 13 13 3 2 2 3 3 4 5 6 7 8 9 9 9 11 11 1 2 3 9 11 12 10 25 The following charts are control bar menus for DVD, VCD, CD and MP3 respectively. Please note that the menu may vary somewhat between different discs. The meanings for the icons are as follows.
A B C D E F G H I J K 0 1 2 L M N O P Q R S T U V 3 4 5 W X Y Z ( ) _ : ? . 6 7 8 9 Space Caps BkSp Delete Clear Exit OK MY DVD Disc Operation 23 Rename Disc In the Disc Operation control bar menu, us.
An important point after buying a device Astar DVR-2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Astar DVR-2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Astar DVR-2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Astar DVR-2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Astar DVR-2100 will certainly help you make a decision on the purchase.
If you already are a holder of Astar DVR-2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Astar DVR-2100.
However, one of the most important roles played by the user manual is to help in solving problems with Astar DVR-2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Astar DVR-2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
