Instruction/ maintenance manual of the product 7650 Nexstar
Go to page of 13
Copyright © 2010 Vantec Thermal Technologies. All Rights Reserved. All Registered T rademarks Belong T o Their Respected Companies. M o d e l : N S T - D300S3 User’s Manual S A T A t o SuperSpeed USB 3.
1 ■ Table of Contents Introduction System Requir ements Specications/F eatures Installation Removal Creating a P ar tition F or W indows XP/Vista/7 U sers F or M ac Users W arranty 1. 2. 3. 4. 5. 6. 7. ............................................
2 1.Introduction The Vantec NexStar® SuperSpeed USB 3.0 Hard Drive Dock is a complete and easy way to add or swap hard drives with your computer. Integrated with the latest USB 3.0 technology, performance is increased by 10 fold oering maximum speeds of up to 5 Gbps.
3 3.Specifications/Features Features : Install and Acces s Hard Dr ives in Se conds Simple t o Use Des ign; No S crews Need ed Eject Bu tton for Easy Remo val of Har d Drive Compatib le with 2 .5” or 3. 5” SATA I/ II Hard D rive Maximum Transfer Rates Up to 5 Gbps w/USB 3.
4 4.Installation Connect the power adapter to the NexStar® Hard Drive Dock. Connect the USB 3.0 Cable to the NexStar® Hard Drive Dock and attach the other end to your computer.
5 3. Insert 2.5” or 3.5” SATA HDD into the slot..
6 3-1. When the eject button is upright, the NexStar® Hard Drive Dock is ready for use..
7 4.Removal First, safely remove the USB HDD device from your computer operating system. Once safe removal has been completed, proceed to turn o the power to the Hard Drive Dock and eject the HDD.
8 3. Remove the HDD from the Hard Drive Dock..
9 6.Creating a Partition For Windo ws® XP/V ista/7 Users: Right click on “My Computer” and choose “Manage”. Under “Storage” on the LEFT pane, select “Disk Management”.
10 Follow the directions of the wizard. The recommended type is “primary” and the recommended le system is “NTFS.” Please note that Windows® XP/Vista/7 limits FAT32 partitions to only 32GB. Windows Disk Management will format and partition the disk according to your settings.
11 W ARNING: Doing the following setup will erase an y existing data on the drive. From the Volume Scheme menu, choose the desired number of partitions (Mac OS 10.x gives you the option of dividing the drive into at most 16 partitions). You may adjust the size of each partition using the slide bar between the partitions in the Volume Scheme area.
12 7. W arrant y The NexStar® SuperSpeed USB 3.0 Hard Drive D ock comes with a 1 year limited warranty (90 day par ts). If your unit becomes defective within that time frame, please go to http://ww w .vantecusa.com for information on how to receive warranty exchange or repair .
An important point after buying a device Nexstar 7650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nexstar 7650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nexstar 7650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nexstar 7650 you will learn all the available features of the product, as well as information on its operation. The information that you get Nexstar 7650 will certainly help you make a decision on the purchase.
If you already are a holder of Nexstar 7650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nexstar 7650.
However, one of the most important roles played by the user manual is to help in solving problems with Nexstar 7650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nexstar 7650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
