Instruction/ maintenance manual of the product NS-211KA Newstar
Go to page of 10
NS-21 1KA User Manual www .newstar .nl Made in T aiwan.
INTRODUCTION ----------------------------------------- FEA TURES ------------------------------------------------ SPECIFICA TIONS---------------------------------------- P ACKAGE CONTENTS-------------.
Introduction Thank you for purchasing the NEWST AR KVM Switch, this product will ensure easy and accurate control over 2 PCs through a single console. The is compatible with 15 pin HDDB style computers and comes with advanced features.
Hardware Installation Please follow the steps below closely and in the order as shown. Otherwise keyboard, mouse, audio, microphone and video errors may occur . Before starting with connecting your computers and console devices to the NS-21 1KA make sure that everything is powered off.
Hardware Installation 4.Now the PC connections will be made with the PS/2 Keyboard, Mouse and 15-pin monitor (VGA) connections to the NEWST AR all-in-one cable converter . Connect a cable with the male side to the rear panel of the NS-21 1KA unit to the connector labeled PC1.
Using the NS-21 1KA The NS-21 1KA switch unit provides two ways to select which computer is the active system. Use either the Select button on the unit, or make use of the keyboard Hot key commands. Y ou may notice that the mouse can not be used for around 2 seconds when the NS-21 1KA switches to another computer .
T roubleshooting Keyboard My keyboard is not detected, or a keyboard error is given during boot-up. 6 Please verify that the keyboard cables are inserted properly . 6 Check to make sure that power cord is plugged in and is working properly . The computers all boot up properly , but the keyboard is not functional.
V ideo The image on my monitor is not clear . 6 Please verify that all video cables are inserted properly . 6 It may be that your resolution or refresh rate is too high. T ry a lower refresh rate, or try lowering the resolution. 6 Y our video cable may be too long.
NS-21 1KA NS-21 1KA FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NS-21 1KA NS-21 1KA Print, type or use block letters. Y our name: Mr./Ms_________________________________________________________ Organization:________________________________Dept.
An important point after buying a device Newstar NS-211KA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newstar NS-211KA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newstar NS-211KA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newstar NS-211KA you will learn all the available features of the product, as well as information on its operation. The information that you get Newstar NS-211KA will certainly help you make a decision on the purchase.
If you already are a holder of Newstar NS-211KA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newstar NS-211KA.
However, one of the most important roles played by the user manual is to help in solving problems with Newstar NS-211KA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newstar NS-211KA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
