Instruction/ maintenance manual of the product FPMA-D100 Newstar
Go to page of 6
Before starting Assembly Please spend a short time reading this manual then follow the simple step by step guide to assembly . Some panels are viewed differently from the exploded drawing below , this is for extra clarity . Do not discard any of the packaging until you have checked all the parts and the pack of fittings.
NewStar user's Manual L CD Monitor Arm FPMA-D100 www .NewStar .nl P h o n e :+3 1( 0 )2 35 4 78 88 8.
Clamping system is well assembled in standard packing. However , user could disassemble this unit and re-assemble for thicker desk fitting by adjusting cranking bar & clamp position. At least two screws should be used for clamping system. Remove pad cover and adhere to bottom of larger L bracket.
Clamp to the desk with at least 2 screws. For desks 15mm - 102mm thick, over 30mm is suggested. A. Standard Befestigungs System Before assembling the arm to the wall, make sure to remove the desktop clamp first. Hardware(screws) is not included. Before assembling the track to the arm, make sure to remove the desktop clamp first.
The vertical adjustment range is from -10 ~90 . Do not overwork, to avoid the damage of gas-spring system. Guarantee:10000 turns. Don't repeat the operation continuously more than 10 times . 0 0 The panel rotation range is from -135 ~135 . Guarantee:6000 turns.
1. Do not rotate the arm over the edge of desk to avoid the arm falls.(Fig.1) 2. Do not place the arm in a shaking environment . 3. Do not remove any part except handle, rubber cap and bolt as illustrated.(Fig.2) 4. Do not put your fingers in the space of knobs to avoid getting hurt.
An important point after buying a device Newstar FPMA-D100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newstar FPMA-D100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newstar FPMA-D100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newstar FPMA-D100 you will learn all the available features of the product, as well as information on its operation. The information that you get Newstar FPMA-D100 will certainly help you make a decision on the purchase.
If you already are a holder of Newstar FPMA-D100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newstar FPMA-D100.
However, one of the most important roles played by the user manual is to help in solving problems with Newstar FPMA-D100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newstar FPMA-D100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
