Instruction/ maintenance manual of the product DN483 Newcon Optik
Go to page of 10
13. ACCEPTANCE CERTIFICATE Image Intensifier Tube Min imu m Mea su red Resolution, lines/mm 30 Photocathode sensitiv ity, integral, µ A/ lm 400 Light ampl ification 20,000 Image Intensifier Tube Seri.
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully .
10. TROUBLESHOOTING ] The scope does not work . Check that the batteries are installe d properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with ne w ones. The image does not appear in focus. Bring the inspected object to th e ce nter of the im age.
CAREFULLY READ THE INSTRUC TIONS BEF ORE USE! MISUSE WILL VOID THE WARRANTY. 1. BRIEF DESCRIPTION DN482/483 Night Vision Scope is a modern, universal night vision device designed for a wide range of a.
• Remove the rubbe r eyepiece guard from the scope. • Set the eyepiece in the medium position. • Screw the adapter ring with the camera in an internal groove of an eyepiece. • Switch on the device and focus the assembled system with the help of the objectives of the device and camera.
VIDEO 3. TECHNICAL CHARACTE RISTICS General Magnificati on, x 3.7 6.1 Field of view, degree 10 8 Objective lens Focus lengt h, mm 100 165 F-number 1.5 2.
7. ADJUSTMENT OF THE SCOPE ON THE RIFLE Type and dimensions of the reticle The type and dimensions are represented on the drawing. The brightness of the reticle may be adjusted by the knob (8). The dimensions are quoted in meters for the 100 m distance.
recommended to use Alkaline batteries, which ensure the most stable performance. b. Testing of operation in a daytime During the bright time of the day: Turn on the on/off switch (9). The lens cap (6) must be on. Direct the device at an object placed within 10-20 m from the viewer.
(Newcon Optik supplies all parts of the alignment). Installation of the device is performed as follows : • Check the elevation of the fastening screws (2), pulling the rail (3) to the body of the device (1) above the upper surface of the rail. The elevation must not exceed the depth of the dead threaded holes in the body of the device.
Front and rear feet (2, 3) with thwart screws (6) are the standard feet for Standard prisms (4), manufactured by the companies that produce mounts (for example, Ernst Apel GmbH Germany). The mount of Standard prism type (4 ) and s crews (5) are optional.
An important point after buying a device Newcon Optik DN483 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik DN483 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik DN483 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik DN483 you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik DN483 will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik DN483, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik DN483.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik DN483. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik DN483 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
