Instruction/ maintenance manual of the product AK-200 NewAir
Go to page of 17
Please read and save these instructions. AK-200BK KEGERATOR OWNER'S MANUAL AK-200 SER IES.
1 CONTENTS The rating data indicated on the energy label is based on the testing condition of installing the un - extended air exhaust duct without adaptor A & B ( The duct and the adaptor A & B are listed in the accessories chart of the Instruction Manual ).
2 SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: Use this appliance only for its intended purpose as described in this operation manual.
3 SAFETY PRECAUTIONS This appliance is not intended for use by young children or infirm persons without supervision. This appliance is NOT A TOY! Y oung children should be supervised to ensure that they do not play with this appliance. When transporting the refrigerator , keep the unit in the upright position.
4 SAFETY PRECAUTIONS Impor tant Safety Precautions of CO 2 (Carbon Dio xide) Gas Co 2 gas can be dangerous! CO cylinders contain high-pressure compressed 2 gas, which can be hazardous if not handled properly . Make sure you read and understand all the procedures for the CO cylinders before installation.
5 SA VE THESE INSTRUCTIONS For Future Use Risk of child entrapment! Before throwing away your old appliance: ● T ake off the doors. ● Leave the shelves or other accessories in place so that children may not easily become trapped inside.
6 you are still unsure whether the kegerator has been properly installed, we recommend that you contact a qualified installer . Note: Allow the kegerator to stand in an upright position for at least 8 hours before plugging in the unit.
Also, See Illustrations E & F on pages 12 & 13, showing the hose connections to CO 2 regulator and the regulator to the beer tap. Installing the Guardr ail Follow the steps below to install the guardrail. 1. Place the guardrail on top of the cabinet.
DANGER! CO can be dangerous! CO cylinders contain high-pressured gas, which can be 2 2 hazardous if handled improperly . They must be handled with care. Tapping the Beer Keg – Installing Keg Tap (Single-Valve Type Barrel) Follow these steps below to tap the beer keg.
Illustration A Black Rubber Washer Installed in Wing Nut Illustration B Then Attach to CO2 Bottle Connector f i g .1 f i g .2 f i g .3 f i g .4 f i g .
Note: It is normal to see condensation form on the faucet. It is caused by the difference of temperature between the cold beer and the inside of the faucet when beer is flowing through the line. Cleaning & Maintenance Flushing the tubes Follow the steps below to clean the keg tap and hoses.
Important Safety Message for Draft Beer Dispensing Safety devices should be installed in the following places: A. On or directly downstream from the CO regulator. B. On the tapping device C. In-line in the pressure system Note: Locations A and B noted above are preferable.
I l l u s t r a t i o n D I l l u s t r a t i o n E 12 SPECIAL SAFETY INFORMA TION.
I l l u s t r a t i o n F QUICK ASSEMBL Y INSTRUCTIONS Installing Casters 1. Remove all items from inside cabinet. 2. Lay kegerator on its side. 3. Install four casters, making sure the two locking casters are up front 4. Stand kegerator up on casters and allow Freon to settle for at least 8 hours before plugging in.
refrigerator . 3. Sit tower down onto opening and turn counter clockwise to lock. Install Guardrail 1. Place guardrail (10) over rubber inserts on refrigerator cabinet and push down to secure. Connecting regulator and coupler (Illustrations on page 9) 1.
15 QUICK ASSEMBL Y INSTR UCTIONS Band 6.
LIMITED MANUF ACTURER'S WARRANTY This appliance is covered by a limited manufacturer's warranty . For one year from the original date of purchase, the manufacturer will repair or replace any.
An important point after buying a device NewAir AK-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NewAir AK-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NewAir AK-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NewAir AK-200 you will learn all the available features of the product, as well as information on its operation. The information that you get NewAir AK-200 will certainly help you make a decision on the purchase.
If you already are a holder of NewAir AK-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NewAir AK-200.
However, one of the most important roles played by the user manual is to help in solving problems with NewAir AK-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NewAir AK-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
