Instruction/ maintenance manual of the product 45413 Netopia
Go to page of 34
Version 2. 2 2002 MegaPath Networks Inc. All Rights Reserved. DSL Equipment Installation Guide Netopia 45413 Router.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 2 2002 MegaP ath Networ ks Inc. All rights r eserved. Table of Contents Follow Steps 1 through 5 to complete the DSL E.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 3 2002 MegaP ath Networ ks Inc. All rights r eserved. Welcome to MegaPath DSL service. You wi ll find everything you need to install your DSL service in this kit. It is important to carefully and exactly follow the step-by-step instructions for your operating system.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 4 2002 MegaP ath Networ ks Inc. All rights r eserved. Netopia Router Step 2: Verify the Contents of Your DSL Equipment.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 5 2002 MegaP ath Networ ks Inc. All rights r eserved. Step 3: Install a Telephone Filter on Every Telephone Line IMPOR.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 6 2002 MegaP ath Networ ks Inc. All rights r eserved. c. DSL Router and Analog Dev ice on the Same Jack 1.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 7 2002 MegaP ath Networ ks Inc. All rights r eserved. Step 4: Install the Netopia 45413 DSL Router Insert the connector from the power adapter to the power port, and plug the other end into an electrical outlet.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 8 2002 MegaP ath Networ ks Inc. All rights r eserved. PC Environment Step 5: Configuring Your Computer Windows ® 95 and Windows ® 98 Dynamic Configu ration (Recommended) Before you use your ne w DSL connection, you must have TCP/IP set up on your computer.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 9 2002 MegaP ath Networ ks Inc. All rights r eserved. 3. Select the IP Address tab. Click Obtain an IP Address automatically . 4. Click on the Gateway tab. If the box under Installed Gateways contains an y IP addresses, highlight the IP addresses and click Remo ve .
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 10 2002 MegaP ath Networ ks Inc. All rights r eserved. 5. Click on the DNS Configuration tab. Click Disable DNS . Click OK . 6. When prompted, reboot the computer. Click OK .
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 11 2002 MegaP ath Networ ks Inc. All rights r eserved. Windows 95 and Windows 98 Static Configuration (Option al) 1. Find the Network Neighbor hood icon on your deskto p.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 12 2002 MegaP ath Networ ks Inc. All rights r eserved. 3. Select the IP Address tab. Click Specify an IP A ddress . Move your cursor to the IP address dialog box. Enter 192.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 13 2002 MegaP ath Networ ks Inc. All rights r eserved. 5. If you already have an Internet connection , this window will be populated with the information required by your current Internet provider.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 14 2002 MegaP ath Networ ks Inc. All rights r eserved. If you do not already have an Internet Service pro vider , move your cursor to each dialog box and e nter the information as shown.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 15 2002 MegaP ath Networ ks Inc. All rights r eserved. Windows 2000 Dy namic Configuration (Recommended) 1. Right click on My Network Places and select Properties . Once highlighted, left click once on yo ur mouse.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 16 2002 MegaP ath Networ ks Inc. All rights r eserved. 4. Highlight Internet Protocol (TCP/IP) and click on the Properties button. If y ou do not see TCP/IP in the list, go to the section in this guide titled Installing TCP/IP.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 17 2002 MegaP ath Networ ks Inc. All rights r eserved. Windows 2000 Static Configuration (Op tional) 1. Right click on My Network Places and select Properties . Once highlighted, left click once on yo ur mouse.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 18 2002 MegaP ath Networ ks Inc. All rights r eserved. 4. Highlight Internet Protocol (TCP/IP) and click on the Properties button. If y ou do not see TCP/IP in the list, go to the section in this guide titled Installing TCP/IP.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 19 2002 MegaP ath Networ ks Inc. All rights r eserved. Windows NT Dynamic Configuration (Re commended) 1. Right click on My Network Places and select Properties . Once highlighted, left click once on your mouse.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 20 2002 MegaP ath Networ ks Inc. All rights r eserved. 3. In the next window, you will see TCP/IP Properties . High light this, and left click on the Properties button at the bottom of the Network Protocols window.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 21 2002 MegaP ath Networ ks Inc. All rights r eserved. 5. Click OK in this window as well. Under most circumstances, Windows NT will not require a reboot. If it does, please do so.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 22 2002 MegaP ath Networ ks Inc. All rights r eserved. Installing TCP/IP for Windows Note: Complete this section only if you do not s ee TCP/IP listed in your Network Components when you begin configuring y our computer.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 23 2002 MegaP ath Networ ks Inc. All rights r eserved. 3. Click Ad d . 4. Select Protocol and click Add . 5. Select Microsoft® on the left half of the screen, and select TCP/IP on the right half of the screen.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 24 2002 MegaP ath Networ ks Inc. All rights r eserved. 6. From the Start menu, open Settings/Control Panel.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 25 2002 MegaP ath Networ ks Inc. All rights r eserved. 8. Choose Client on the Network Control pa nel window . 9. Select Microsoft ® on the left half of the screen, and select Client for Microsoft Net works on the right half of the screen.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 26 2002 MegaP ath Networ ks Inc. All rights r eserved. MAC Environment Macintosh DHCP Configuration (Recommended ) 1. Single click the Apple Menu and move down to Control Panels.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 27 2002 MegaP ath Networ ks Inc. All rights r eserved. 3. Select Using DHCP Server from the Configure pull down menu. 4. Single click in the DHCP Client ID and enter any name you choose for your Macintosh.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 28 2002 MegaP ath Networ ks Inc. All rights r eserved. 5. Single left click on File , then select Quit . 6. A warning box will appear asking you to save your settings. Select Save , then restart yo ur Macintosh.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 29 2002 MegaP ath Networ ks Inc. All rights r eserved. Macintosh Static Configuration 1. Single click the Apple Menu and move down to Control Panels. Highlight TCP/IP and single click once on your mouse.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 30 2002 MegaP ath Networ ks Inc. All rights r eserved. 3. Select Manually from the Confi gure pull down menu. 4. Single click in the IP Address text box and enter 192.168.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 31 2002 MegaP ath Networ ks Inc. All rights r eserved. 5. Single click in the Subnet mask text box and enter your subnet mask. T he Subnet Mask is always 255.255.255.0. 6.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 32 2002 MegaP ath Networ ks Inc. All rights r eserved. 7. Single click in the Name se rver addr text box and enter the IP addresses for the domain name servers locate d where you live.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 33 2002 MegaP ath Networ ks Inc. All rights r eserved. 9. Single click on File , then select Quit . 10. A warning box will appear asking you to save your settings. Select Save , then restart your Macintosh.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000 /Mac Page 34 2002 MegaP ath Networ ks Inc. All rights r eserved. Troubleshooting The Power, Ethernet , and DSL lights (labeled on the face of the router) shou ld all turn solid green within two minutes after the unit is turned on.
An important point after buying a device Netopia 45413 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Netopia 45413 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Netopia 45413 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Netopia 45413 you will learn all the available features of the product, as well as information on its operation. The information that you get Netopia 45413 will certainly help you make a decision on the purchase.
If you already are a holder of Netopia 45413, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Netopia 45413.
However, one of the most important roles played by the user manual is to help in solving problems with Netopia 45413. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Netopia 45413 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center