Instruction/ maintenance manual of the product 3347-02 Netopia
Go to page of 2
Broadband W ithout Boundaries® 1. Decide on a location for the Gateway . Put the Gateway near a power source, a DSL wall outlet, and in a location where air can circulate freely around it. 2. Power the Gateway . Connect the power supply to the power jack on the back panel of the Gateway .
This section gives some simple suggestions for troubleshooting problems with your Gateway’ s initial configuration. Before troubleshooting, make sure you have • plugged in all the necessary cables; and • set your PC’ s TCP/IP controls to obtain an IP address automatically .
An important point after buying a device Netopia 3347-02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Netopia 3347-02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Netopia 3347-02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Netopia 3347-02 you will learn all the available features of the product, as well as information on its operation. The information that you get Netopia 3347-02 will certainly help you make a decision on the purchase.
If you already are a holder of Netopia 3347-02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Netopia 3347-02.
However, one of the most important roles played by the user manual is to help in solving problems with Netopia 3347-02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Netopia 3347-02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center