Instruction/ maintenance manual of the product XAV2602 NETGEAR
Go to page of 16
Powerline AV+ 200 Nano Dual-Port XAV2602 Installation Guide.
© 2011 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc.
3 Package Contents Products sold in some locations include a Resource CD . Powerline AV+ 200 Ethernet cable UK France Germany/Europe Australia Switzerland Your adapter might look like one of these: (N.
4 Hardware Features Filtered AC socket Power LED Ethernet LED Powerline LED Security button Factory Reset button Ethernet Port 1 for higher- priority traffic Ethernet Port 2 for lower-priority data tr.
5 LEDs The LEDs indicate the status of your Powerline adapter. • When you plug in the adapter, the Power LED lights up and turns green. • The adapter is not active when no Ethernet link has occurred for more than 10 minutes. The adapter enters power saving mode, and the Power LED turns amber .
6 Compatible NETGEAR Powerline Devices To create a Powerline network you need at least two compatible Powerline devices. Your Powerline adapter can share a Powerline network with these compatible NETGEAR devices: XAV101, XAV1004, XAV2001, XAV2101, XAV1101, XAV1301, XAV1601, XAV2501, XAV5001, XAV5501, XAV5601, XAV5004, and XAVN2001.
7 Install Your Powerline Adapter The ports use Quality of Service (QoS) to prioritize traffic. Port 1 on the left is the high- priority video port. You can plug a power strip into the filtered outlet, but do not plug your Powerline adapter into a power strip.
8 You can set up a new Powerline network with your XAV2602 and a compatible Powerline device, or you can add your XAV2602 to an existing Powerline network. Set up a new Powerline network: 1. Obtain at least one more Powerline device that is compatible with the XAV2602.
9 The Powerline LED turns on for each Powerline adapter when they detect each other. The devices automatically form a Powerline network. Add the adapter to a secure Powerline network: Your Powerline network is already secured if you used the Security button or the Powerline Utility to set up security.
10 Add the adapter to a Powerline network that has not been secured: 1. Check to make sure that the Powerline devices you already use are compatible. 2. Plug the XA V2602 adapter into another electrical outlet. The XAV2602 will start to communicate with other Powerline devices (indicated by the linking Powerline LED).
11 Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate. After the Powerline network is up and running, you can use the Security buttons on the adapters to add encryption to your Powerline network.
12 Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com . Registration is required before you can use the telephone support service.
13 Safety Information • AC input:100-125V~, 0.2A max in North America and 200-250V~, 0.2A max in other regions, for the XAV2602. • Operating temperature: 0C to 40C • The socket-outlet shall be installed near the equipment and be easily accessible.
14 • If the input AC voltage is less than 125Vac, the device plugged into the filtered AC socket of the Powerline adapter might not perform as well as expected. • DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip.
Compliance This symbol was placed in accordance with the European Union Directive 2002/ 96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA June 2011.
An important point after buying a device NETGEAR XAV2602 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR XAV2602 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR XAV2602 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR XAV2602 you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR XAV2602 will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR XAV2602, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR XAV2602.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR XAV2602. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR XAV2602 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
