Instruction/ maintenance manual of the product FS108 V2 NETGEAR
Go to page of 4
Installation Guide Fast Ethernet Switch 10/100 Mbps FS105 v2/FS108 v2 T echnical Supp ort PLEASE REFER T O THE SUPPOR T INFORMA TION CARD THA T SHIPPED WITH YOUR PR ODUCT . By r egistering your product at www .NETGEAR.com/register , we can provide you with faster expert technical support and timely notices of product and software upgrades.
Introduction The NETGEAR ® 5/8-P ort Fast E thernet Switch M odel FS105 v2/FS108 v2 provides you with a low-cost, reliable, high-performance switch to connect up to five or eight differ ent Ethernet- enabled devices (such as computers, file servers, print ser vers, printers, routers and hubs).
Unpack the Bo x and V erify the Contents When you open the box, verify that you r eceived everything. The package includes: • 5/8-P ort F ast Ethernet S witch FS105 v2/FS108 v2 • AC pow er adapter.
Install the Switch and Connect the Other De vices 1. Place the switch on a flat surface or hook onto the screws. 2. F or each device, insert one end of an Ethernet cable into the port in the device and insert the other end into one of the Ethernet ports on the switch.
An important point after buying a device NETGEAR FS108 V2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR FS108 V2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR FS108 V2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR FS108 V2 you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR FS108 V2 will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR FS108 V2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR FS108 V2.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR FS108 V2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR FS108 V2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
