Instruction/ maintenance manual of the product ANT24D18 NETGEAR
Go to page of 11
Installation Guide 18 dBi P atch P anel Directional Antenna ANT24D18.
Introduction Thank you for purchasing the NET GEAR ANT24D18 antenna. This Installation Guide provides installing instructions and guidelines for using the NET GEAR 18 dBi P atch Panel Dir ectional Antenna. P ackage Contents The package should contain the following items: •N ETGEAR I ndoor/Outdoor 18 dBi 2.
Configuration and Placement P ole Mount Configuration This illustration shows the pole mount configuration option. W all Mount Configuration With Adjustable Brackets This illustration shows the wall mount configuration with adjustable brackets.
-M ore range: U se the 18 dBi one side with short antenna cable. F or instance W G302, 1.5m cable ACC-10314-01, lightning arrestor , 2m cable, and ANT24D18 on one side and W G302 (with own antennas) on the other side. -S uper range: U se the 18 dBi both side with short/medium antenna cable.
Installing the 18 dBi P atch P anel Directional Antenna There are two parts to the wireless antenna installation pr ocess: •M ount the antenna on a pole, or on a wall with adjustable brackets, or on a wall with fixed brackets. • Connect the appropriate electrical hardwar e depending on if the installation is indoors or outdoors.
Now , Connect the Antenna The instructions below cov er outdoor and indoor installations. Connecting the Antenna for an Outdoor Installation 1. T urn off y our wireless unit. 2. Connect the provided 2-meter cable to the antenna and to the arr estor as shown here.
4. Locate the primary detachable antenna of the wireless device. Remov e the antenna and connect the other end of the NETGEAR cable A CC-10314-01, 02, 03 or 04 to this port. N ote: On access points with two antennas, if you are only r eplacing one antenna, be sure to replace the primary antenna and do not remove the secondary antenna.
Specifications This chapter provides the 18 dBi P atch P anel Directional Antenna specifications. 2 N type Male rev erse 250 V rms min. 0 - 3 GHz 1.5 max. HPF 195 Harbour Industries 2.2 dB max. @ 2.4 - 2.5 GHz 2 Meter Antenna Cable 25 mm (1 in) FRPBC Black, 5 mm (0.
200 W 50 ± 5 Ohms 0 - 3 GHz 1.5 max. 1.3 dB max. 600 V min. (V oltage on upgrade ratio @100V/s) Lightning Arrestor 1000 MOhms 5000 A, 8/20µs 20 A at voltage release = 1s, testing period = 5s, testing duration = 3 min, per test Description Fr equency Range VSWR I nsertion Loss I mpulse Br eakdown V oltage M ax.
Statement of Conditions In the interest of improving internal design, operational function, and/or reliability , NETGEAR reserves the right to make changes to the products described in this document without notice.
T echnical Support PLEASE REFER TO THE SUPPOR T INFORMA TION CARD THA T SHIPP ED WITH Y OUR PR ODUCT. By r egistering your product at www .NET GEAR.com/register , we can provide y ou with faster expert technical support and timely notices of product and software upgrades.
An important point after buying a device NETGEAR ANT24D18 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR ANT24D18 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR ANT24D18 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR ANT24D18 you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR ANT24D18 will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR ANT24D18, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR ANT24D18.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR ANT24D18. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR ANT24D18 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
