Instruction/ maintenance manual of the product ANT24BNA NETGEAR
Go to page of 9
Installation Guide 500mW Bi-directional Booster ANT24BNA Power Injector ANT24BDC.
Introduction This section introduces the NET GEAR ANT24BNA 500 mW Bi-directional Booster and the NETGEAR ANT24BDC 6 VDC, 1.5A P ower I njector and related components.
– U se a NETGEAR antenna cable of no mor e than 3 m between the P ower I njector and the access point. – F or optimal performance, the combined length of both NETGEAR antenna cables should not exceed 13 m. If the length ex ceeds 13 m, the overall performance will decrease.
T wo Antenna P orts, T wo Boosters and T w o Antennas One Antenna P ort, One Booster and One Antenna T wo Antenna P orts, One Booster and T w o Antennas Antenna e.
Specif ications Installing the Booster with the Optional P o wer Injector N ote: As noted in the illustration below , be sure to disconnect the DC power adapter from the ANT24BNA Booster for 802.11b, and connect it to the NET GEAR ANT24BDC P ower I njector .
Description 30 A-P eak for 115 V AC 50 A-P eak for 230 V AC Full Load, 25 ° C, Cold S tart AC Input V oltage AC Input F requency AC Input C urrent AC Inrush C urrent 90 to 264 V AC 50 to 60 Hz 0.4 Arms for 115 V AC 0.2 Arms for 230 V AC NETGEAR PWR-10015-01 DC Adapter Specif ications +6 V Output V oltage ±5% T otal Regulation 0 A / 2.
Specif ications Description PTC F use 2.5 A / 30 V F requency Range PTC F use Insertion Loss Short Circuit P rotection 2400 to 2500 MHz 2.5 A / 30 V 1.5 dB maximum @ 2.4 to 2.5 GHz ANT24BDC P ower Injector f or the ANT24BNA Booster with T wo F emale Re v erse SMA Connectors 750 V RMS maximum 0.
Statement of Conditions In the internal function, and/or reliability , NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
T echnical Support PLEASE REFER TO THE SUPPOR T INFORMA TION CARD THA T SHIPPED WITH YOUR PR ODUCT. By r egistering your product at www .NET GEAR.com/register , w e can provide y ou with faster expert technical support and timely notices of product and software upgrades.
An important point after buying a device NETGEAR ANT24BNA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR ANT24BNA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR ANT24BNA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR ANT24BNA you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR ANT24BNA will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR ANT24BNA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR ANT24BNA.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR ANT24BNA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR ANT24BNA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
