Instruction/ maintenance manual of the product 5334 Aspire Digital
Go to page of 248
Aspire 5334/5734Z Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the up dates ma de on Aspire 5334 Series service guides. Date Chapter Up date s.
III Copyright Copyright © 2010 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a.
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it s upports, please read the fo llowing general info rma tion. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGUR A TION decided for Acer's "glo bal" product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Optical Media Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Removing the Mainboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Removing the RTC Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Removing the Thermal Module .
IX T able of Contents Undetermined Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Post Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X T able of Contents.
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many features: NOTE: Items denoted with a n (*) are only available for selected mod els.
2 Chapter 1 Audio • One built-in mono speaker • Built-in microphone • MS-Sound compatible Storage subsystem Aspire 5334/5734 Z • Hard disk drive: 160/250/320/5 00/640 GB or larger Aspire 5734Z.
Chapter 1 3 Power subsystem ACPI 3.0 CPU power management standard: sup ports S tandby and Hibernation power-savin g modes Adapter: • 3-pin 65 W AC adapter: • 108 (W) x 46 (D) x 29.5 (H) mm (4.25 x 1.81 x 1.16 inches) • 225 g (0.49 lbs.) with 180 cm DC cable Battery: • 48.
4 Chapter 1 Security • McAfee® Inte rn et Security Suite Trial • MyWinLocker® (except China, Hong Kong) Multimedia • Cyberlink® PowerDVD™ • NTI Media Maker™ Gaming • Oberon GameZone (.
Chapter 1 5 System Block Diagram.
6 Chapter 1 Your Acer Notebook tour Front View No. Icon Item Description 1 Acer Crystal Ey e webcam Web camera for video communication (for selected models). 2 Display screen Also called Liquid-Crystal Display (LCD), displays computer output. 3 S peaker Delivers audio output.
Chapter 1 7 Closed Front View Aspire 5734Z model only Left View 7 Click buttons (left and right) The left and right buttons function like the left and right mouse bu tt ons. 8 Palmrest Comfortable support area for your ha nds when you use the computer .
8 Chapter 1 2 Ethernet (RJ-4 5) port Connects to an Ethernet 10/100-based network. 3 External display (VGA) port Connects to a display device (e.g. external moni tor , LCD projector). 4 USB 2.0 ports Connect to USB 2.0 devices (e.g. USB mouse, USB camera).
Chapter 1 9 Right View Bottom View No. Item Description 1 Optical drive Internal optica l drive; accepts CDs or DVDs. 2 Optical disk access indicator Lights up when the optical drive is acti ve. 3 Optical drive eject button Ejects the optical disk from the drive.
10 Chapter 1 Indicators The computer has several easy-to-read status indicators . The front panel indicators are visible even when the computer cover is closed. 2 Battery release latch Releases the battery for removal. 3 Memory compartment Houses the computer's main memory .
Chapter 1 11 TouchPad Basics The following items show you how to use the T ouchPa d: • Move your finger across the T ouchPad (1) to move th e cursor . • Press the left (2) and right (3) buttons located beneath the T ouchPad to perform selection and execution functions.
12 Chapter 1 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, functi on and special keys. Lock Keys and embedded numeric keypad The keyboard h as two lock keys which you can toggle on and off.
Chapter 1 13 Windows Keys The keyboard has two keys that perform Wi ndow s-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu.
14 Chapter 1 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s controls like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
Chapter 1 15 Hardware Specifications and Configurations Processor Processor Specifications CPU Fan T rue V alue T able • Throttling 50%: On=99 °C, Off=96°C • OS Shutdown: 105°C • H/W Shutdown.
16 Chapter 1 BIOS System Memory Item Specification BIOS vendor Insyde BIOS BIOS V ersion V0.06-T02 BIOS ROM type Flash Features • Flash ROM 1MB • Supports ISIPP • Supports Acer UI • Supports multi-boot • Suspend to RAM (S3)/Disk (S4) • V arious hot-keys for system control • Supports SMBUS 2.
Chapter 1 17 Memory Combinations NOTE: Above table lists s ome system memory configur ations. Y ou may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 could be reversed. LAN Interface Wireless Module 802.
18 Chapter 1 Hard Disk Drive Interface Item Specification V endo r & Model Name Seagate ST9500325AS ST9250315AS Seagate ST9320320AS ST9160310AS To s h i b a MK3255GSX MK2555GSX MK1655GSX Western D.
Chapter 1 19 Super-Multi Driv e Module Audio Interface Item Specification V endor & model name HLDS G T20N Sony AD75 80S Performance S pecification With CD Diskette With DVD Diskette With CD Diskette With DVD Diskette T ransfer rate (MB/sec) Sustained: 3,600 KB/s (24x) max.
20 Chapter 1 Power and Keyboard Controller Battery LCD 17” Item Specification Controller ENE KB926 T otal number of keyp ads 99-/100-/103-key keyboard Windows logo key Y es Hotkeys See “Hot Keys” on page 14.
Chapter 1 21 LCD Display Supported Resolution USB Port AC Adapter Resolution 18 bits Resolution 18 bit s 640x480p/60Hz 4:3 Y es 720x576p/50Hz 4:3 Y es 720x480p/60Hz 4:3 Y es 720x576p/50Hz 16:9 Y es 72.
22 Chapter 1 System Power Manag ement Item Specification Mech. Off (G3) Al devices in th e system are turned off completely . Soft Of f (G2/S5) OS initiated shutdown. A ll devices in the system are turned off completely . Working (G0/S0) Individual devices such as the CPU and hard disc may be power managed in this state.
Chapter 2 23 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is al ready properly configured and optimi zed, and you do not need to run this utility .
24 Chapter 2 HM52-MV Intel BIOS Information The Information screen displays a summary of your computer ha rdware information. NOTE: The screen above is for your reference only . Actual values may differ according to model. The table below describes the parameters in this screen.
Chapter 2 25 Main The Main screen allows th e user to set the system time and date as well as enable and disable bo ot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen.
26 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mputer from unauthori zed use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Chapter 2 27 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a pa ssword in the “Enter New Pa ssword” fiel d.
28 Chapter 2 Changing a Password 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current passw or d in the Enter Curr en t Pa ssw or d field and press Enter .
Chapter 2 29 Boot This menu allows the user to deci de the order of boot devices to l oad the operating syste m. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module bay . Select Boot Devices to select specific devices to support boot.
30 Chapter 2 Exit The Exit screen allows you to save or discard any changes you made an d qui t th e BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setu p and save your changes to CMOS.
Chapter 2 31 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following con ditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Flash utility to updat e th e system BIOS flash ROM.
32 Chapter 2 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Menu. 2. Select Boot Menu to modify the boot priority order , for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Chapter 2 33 4. In flash BI OS, the me ssage Please do no t remo ve AC Power Source displays. NOTE: If the AC power is n ot connected, the following message displays. Plug in the AC po wer to continue. 5. Flash is complete when the message Fl ash programming complete displays.
34 Chapter 2 WinFlash Utility Perform the following steps to use the WinFlash Utility: 1. Double-click the WinFlash executable. 2. Click OK to begin the update.
Chapter 2 35 Remove HDD/BIOS Password Utilities This section provide s you with de tails about removing HDD/BIOS password: Remove HDD Password: If you key in the wrong HDD password three times, an error is gen erated. T o reset the HDD p assword, perform the following step s: 1.
36 Chapter 2 Removing BIOS Passw or ds: T o clear the User or Supervisor passwords, open the RAM door and use a metal in strument to short the J1 jumper . Cleaning BIOS Passwords T o clean the User or Supervisor passwords, perform the following steps: 1.
Chapter 2 37 Using Boot Sequence Selector The Boot Sequen ce Selector allows the b oot order to be changed without accessing the BIOS. T o use Boot Sequence Selector , perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen.
38 Chapter 2 Using DMITools The DMI (Desktop Management Interface) T ool copies BIOS information to EEPR OM to be used in the DMI pool for hardware managemen t. When the BIOS displays V erifying DMI pool data it is checki ng that the t able correlates with the hardw are before sending to the operating system (Windows, etc.
Chapter 2 39 Using the LAN MAC EEPROM Utility Y ou can use the MAC.BA T utility to write t he MAC.CFG file to the EEPROM under DOS mode. 1. Use a text editor (for example: Notepad) to open the MAC.CFG file. Y ou can see the MAC.CFG contents as below: 2.
40 Chapter 2 Creating a USB Flash Crisis Disk 1. Plug in the USB flash disk. 2. Select the Fast Format option and click Sta rt . Then click Next . 3. Click Format and th en Exit to complete the operation.
Chapter 2 41 4. Copy the P A WF5x64.fd file to the USB flash disk root directory . NOTE: Do not place any other *.fd files to the USB flash disk root directory . Using the crisis disk 1. Plug in the USB Flash Disk without AC plug. 2. Press Fn +esc keys and hold them down, then plug in AC power .
42 Chapter 2.
Chapter 3 43 Machine Disassembly and Replacement IMPORT ANT : The outside housing and color may vary from the mass produced model. This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting .
44 Chapter 3 Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.
Chapter 3 45 External Module Disassembly Process IMPORT ANT : The outside housing and color may vary from the mass produced model. External Modules Disassembly Flowchart The flowchart below gives you a graphic represen tati on of the external module disassembly sequence and instructs you on the components that need to be removed du ring servicing.
46 Chapter 3 Removing the Battery Pack 1. T urn computer over . Slide the battery lock in the direction shown. 2. Slide and hold the battery rel ease latch to the release po sition (1), then lift out the battery pack from the main unit (2). NOTE: The battery has been highlighted with a yello w oval as shown in the above image.
Chapter 3 47 Removing the SD Dummy Card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot..
48 Chapter 3 Removing the Lower Covers 1. See “Removing the Battery Pack” on page 46. 2. Remove the three (3) screws securing the Memory and HDD Covers. 3. Remove the HDD cover as shown. 4. Carefully open the Memory Cover . Ste p Size Quantity Screw T ype Lower Covers M2.
Chapter 3 49 Removing the Optical Drive Module 1. See “Removing the Lower Covers” on page 48. 2. Remove the screw securing the ODD module. 3. Insert a suitable tool into the access slot in the battery bay as shown. G ently lever the ODD module out of the chassis.
50 Chapter 3 5. Remove the ODD bezel by rotating the top edge downward and pulling it clear of the module. 6. Remove the two (2) screws se curing the ODD bracket a nd remove the ODD bracket fro m the optical disk drive module.
Chapter 3 51 Removing the DIMM Modules 1. See “Removing the Lower Covers” on page 48. 2. Push out the release latches on both sides of the DIMM socket to release th e DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the seco nd DIMM module if present.
52 Chapter 3 Removing the WLAN Module 1. See “Removing the Lower Covers” on page 48. 2. Remove the adhesive tape securing the Antenna cables in place. 3. Disconnect the antenna cables from the WL AN Board. NOTE: Cable placement is Black to the MAIN terminal (upper) and White to the AUX terminal (lower).
Chapter 3 53 4. Move the antenna away and remove the two (2) screws to release the WLAN Board . 5. Detach the WLAN Board from the WLAN socket. NOTE: When reattaching the antennas, ensure th e cables are tucked into the chassis to prevent dama ge.
54 Chapter 3 6. Remove two (2) screws from the WLAN bracket. 7. Lift the WLAN bracket clear of the chassis. Ste p Size Quantity Screw T ype WLAN Module M2*3 2.
Chapter 3 55 Removing the Hard Disk Drive Module 1. See “Removing the Lower Covers” on page 48. 2. Using the pull-tab, slide the HDD Module in the di rection of the arrow to disconnect the interface. 3. Lift the HDD Module clear of the HDD bay . NOTE: T o prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
56 Chapter 3 4. Remove the four (4) screws (two each side ) securing the hard disk to the carrier . 5. Remove the HDD from the carrier . Ste p Size Quantity Screw T ype HDD Carrier M3*3 4.
Chapter 3 57 Removing the Switch Cover CAUTION: Using metal tools to remove the Switch Cover may cause damage to the outer casing. The use of plastic tools or fingers is recommended to remove the Switch Cover . 1. See “Removing the Battery Pack” on page 46.
58 Chapter 3 Removing the Keyboard 1. See “Removing the Switch Cover” on page 57. 2. Pry up the centre of the Keyboard and rotate it upward awa y from the Upper Cover . 3. T urn the keyboard over o n to the T ouchPad area to expose the FFC con nector .
Chapter 3 59 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Module M2.5*8 2 86.NAF0 2.003 LCD Module M2.5*8 4 86.NAF0 2.003 Upper Cover M2.5*8 1 1 86.NAF02.003 Upper Cover M2.5*8 9 86.NAF02.003 Power Board M2*3 2 86.
60 Chapter 3 Removing the LCD Module 1. See “Removing the Keyboard ” on page 58. 2. T urn the computer over . Remo ve the two (2) se curing screws from the bottom of the chassis. 3. Remove the Antenna Cables from the cable channe l as sh o wn. Ensure that the cabl es are free from all cable clips.
Chapter 3 61 4. S tand the computer on the LCD Panel and pull the Antenna cab les completely through the chassis. 5. Disconnect the L VDS cable from the Mainboard.
62 Chapter 3 7. Remove the white Antenna cable from the cable channe l. Ensure that the cable is completely free of the retaining clips all the way to the hinge well. 8. Remove the microphone cable. a. Disconnect the microphone cable on the upper cover.
Chapter 3 63 10. Press the left side Hinge Cover inward, as shown, and lift to remove the cover from the chassis. 11 . Repeat the process for the right side Hin ge Cover . 12. Remove the four (4) securing screws (two each side) from the LCD module. 13.
64 Chapter 3 14. Lift the LCD Module clear of the Upper Cover ..
Chapter 3 65 Removing the Upper Cover 1. See “Removing the LCD Module” on page 60. 2. T urn the computer over . Remo ve the eleven (1 1) screws on the bottom panel. 3. T urn the computer over . Remo ve the three (3) screw caps at the rear of the Upper Cover as shown.
66 Chapter 3 4. Disconnect the following three (3) cables from the Mainboard . 5. Disconnect the speaker cable as sh ow n ..
Chapter 3 67 NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFCs whenever available to prevent damage . 6. Release the locking latch on the power board and disconnect the FFC cable as shown. 7. Release the locking latch on the touch pad FFC and disconnect as shown.
68 Chapter 3 8. Remove the nine (9) screws on the top panel. 9. S t arting at the front right side of the cover , pry apar t the Upper a nd Lower Covers as sho wn. Work along the front edge of the casing to the left as shown, then lift the Upper Cover clear of the Lowe r Cove r .
Chapter 3 69 Removing the Power Board 1. See “Removing the Upper Cove r” on page 65. 2. Locate the Power Board on the Upper Co ve r as shown. 3. Remove the two (2) screws securing the Power Board to the Upper Co ver . 4. Lift the Power Board clear of the Upper Cover as shown .
70 Chapter 3 Removing the Left Speaker Module 1. See “Removing the Upper Cove r” on page 65. 2. Locate the Left S pe aker Module on the Upper Co ver as shown. 3. Remove the S peaker cable from the cable channel. Ensu re th at the cable is free from all cable clips.
Chapter 3 71 5. Lift the S peaker clear of the Upper Cover , left side first as shown..
72 Chapter 3 Removing the TouchPad Bracket IMPORT ANT : The T ouchPad Board cann ot be removed individua lly . T o replace the T ouchPad Board, replace the entire Upper Cover . 1. See “Removing the Upper Cove r” on page 65. 2. Lift the FFC to detach the adhesive securing the cable to the Upper Cover .
Chapter 3 73 4. Remove the two (2) screws from T ouchPad bracket. 5. Lift the rear edge of the T ouchPad bracket first to clear the se curing clips and remove it as shown.
74 Chapter 3 Removing the Mainboard 1. See “Removing the Upper Cove r” on page 65. 2. Remove the single securing screw from the Mainboard. 3. Lift the mainboard from the chassis, right edge fi rst, and place it on a clean, dust-free surface. Ste p Size Quantity Screw T ype Mainboard M2.
Chapter 3 75 Removing the RTC Battery IMPORT ANT : Follow local regulations fo r disposal of all batteries. The RTC Battery is soldered to the Mainboard. T o replace the battery , solder the new battery to the connections shown. NOTE: The battery has been highlighted with a yello w oval as shown in the above image.
76 Chapter 3 Removing the Thermal Module 1. See “Removing the Lower Covers” on page 48. 2. T urn the Mainboard over to access the Thermal Module. 3. Remove the four (4) securing screws (in reverse numeri cal orde r from screw 4 to screw 1) from the Thermal Module.
Chapter 3 77 4. Using both hands, lift the Thermal Module clear of the Mainboard..
78 Chapter 3 Removing the CPU Fan 1. See “Removing the Therma l Module ” on page 76. 2. Disconnect the Fan cable from the Mainboard as shown . 3. Remove the three (3) securing screws from the Fan Module. 4. Lift the CPU Fan clear of the Mainboard as shown.
Chapter 3 79 Removing the CPU IMPORT ANT : The pins on the underside of the CPU are very delicate . If they are damag ed, th e CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed. 1. See “Removing the Therma l Module ” on page 76.
80 Chapter 3 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Bezel M2.5*6 4 86.NAF 02.00 2 LCD Panel M2 .5* 6 2 86.NAF02.002 Inverter Board M2.5*6 1 86 .NAF02.002 LCD Brackets M2*3 6 86.NAF02.
Chapter 3 81 Removing the LCD Bezel 1. See “Removing the LCD Module” on page 60. 2. Remove the two (2) upper and two (2) lower bezel screw caps and screws. 3. S tarting from the bottom edge of t he bezel, pry the bezel upwards an d aw ay from the panel.
82 Chapter 3 Removing the Camera Module 1. See “Removing the LCD Bezel” on page 81. 2. Locate the Camera Module at the top of the LCD Module and disconnect the camera cabl e.
Chapter 3 83 Removing the Inverter Board 1. See “Removing the LCD Bezel” on page 81. 2. Disconnect two (2) cables o n the inverter board. 3. Remove one (1) screw from the inverter board. 4. Lift the LCD Panel clear of the module. Ste p Size Quantity Screw T ype Inverter Board M2.
84 Chapter 3 Removing the LCD Panel 1. See “Removing the Camera Module” on page 82. 2. Remove the two (2) securing screws from the LCD Panel. 3. Pull up on th e cable to free i t from the adhesive . 4. Lift the LCD Panel clear of the module. Ste p Size Quantity Screw T ype LCD Panel M2.
Chapter 3 85 Removing the LCD Brackets and FPC Cable 1. See “Removing the Inverter Board” on page 83. 2. Remove the six (6) securing screws (three on each side) from the LCD Panel brackets. 3. Remove the LCD brackets by pulling away from the LCD Panel.
86 Chapter 3 4. Peel back the mylar on the L VDS connector . 5. Disconnect the L VDS cable from the LCD panel. 6. Remove the L VDS cable from the LCD panel.
Chapter 3 87 Removing the Antennas 1. See “Removing the Inverter Board” on page 83. 2. Remove the adhesi ve strips holding the left antenna cabl e in place. Ensure the cabl e is free fro m obstructions. 3. Remove the cable from the cable channel. Ensure that the cab le is free from all cable clips and adhesive strips.
88 Chapter 3 5. Lift the left Antenna clear of the cover . 6. Remove the adhesive strips holding the right antenna cable in pla ce. Ensure the cable is free from obstructions. 7. Remove the cable from the cable channel. Ensure that the cab le is free from all cable clips and adhesive strips.
Chapter 3 89 8. Remove the adhesive tape securing t he right Antenna to the LCD Module. 9. Lift the right Antenna clear of the cover ..
90 Chapter 3 LCD Module Reassembly Procedure Replacing the Antennas 1. Replace the right Antenna as shown. Ensure that th e locating pins on the Antenna are corre ctly seated. 2. Replace the adhesive strip to secure the Antenna in place. 3. Run the cable down th e side of the LCD Module using all available cli ps and adhesive.
Chapter 3 91 5. Replace the left Antenna as shown. Ensure that the locatin g pins on the Antenna are correctly seated. 6. Replace the adhesive strip to secure the Antenna in place. 7. Run the cable down th e side of the LCD Module using all available cli ps and adhesive.
92 Chapter 3 9. The Antennas and cables appear as sho wn when correc tly installed..
Chapter 3 93 Replacing the LCD Panel 1. Connect the LCD cable to the panel connector as shown. 2. Press down on the mylar to secure the cable in place. 3. Align the LCD brackets with the screw holes on the panel. Replace the si x (6) screws (three o n each side) in the brackets as shown.
94 Chapter 3 Replacing the Camera Module 5. Secure the LCD mod ule with the two (2) securing screws. 1. Place the camer a in the LCD Modu le. 2. Conne ct the cable to the camera module.
Chapter 3 95 Replacing the Inverter Board 1. Place the inverter board in the LCD cover . 2. Replace one (1) screw on the inverter board. 3. Replace two (2) cables on the inverter board.
96 Chapter 3 Replacing the LCD Bezel 1. Replace the bezel and press down until th ere are no gaps between the bezel and the LCD Module. IMPORT ANT : Ensure that the LCD cables pass through th e hinge wells and are not trapped by the bezel.
Chapter 3 97 2. Replace the four (4) screws and screw caps provided..
98 Chapter 3 Main Module Reassembly Procedure Replacing the CPU IMPORT ANT : The CPU has a Pin1 locator that must be positi oned corresponding to the marker on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator .
Chapter 3 99 Replacing the CPU Fan Replacing the Thermal Module IMPORT ANT : Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module.
100 Chapter 3 Replacing the Mainboard 3. Align the screw holes on the Therma l Mo dule and Mainboard then replace the modul e. Keep the module as level as possible to spre ad the thermal grease evenly . 4. Replace the four (4) securing screws (in numerical order from screw 1 to screw 4) to secur e the Thermal Module in p lace.
Chapter 3 101 Replacing the TouchPad Bracket 1. Replace the T ouchPad bracket top edge fi rst to engage the securing clips. 2. Press the bracket down to engage the securing clips. 3. Replace the two (2) screws to secure the T ouchPad Bracket to the Upper Cover.
102 Chapter 3 5. Replace the FF C and press down a s indicated to secure it to the Upper Cover ..
Chapter 3 103 Replacing the Left Speaker Module Replacing the Power Board 1. Place the module right side first on the Upper Cover as shown. Ensure that the right side of the module is sea ted correctly in the securing clip. 2. Replace the single screw to secure the module in place.
104 Chapter 3 2. Replace the two (2) screws to secure the board to the Upper Cover ..
Chapter 3 105 Replacing the Upper Cover 1. Place the Upper Cover on the Lower Cover as shown. 2. Press down around the edges to secure it in place..
106 Chapter 3 3. Replace the nine (9) screws in the Upper Cover as shown. 4. Connect the following cables to the Mainboard. 5. Connect and lock the touchpad FFC.
Chapter 3 107 6. Connect and lock the power board FF C ca ble as shown. 7. Connect the speaker cable as shown..
108 Chapter 3 8. Replace the three (3 ) screw caps as shown. 9. T urn the computer over and replace the eleven (1 1) screws as shown..
Chapter 3 109 Replacing the LCD Module 1. Align the screw holes on the LCD Module and Upper Cover and replace the LCD Module. 2. The lef t and right screw covers are shaped differently . Ensure that the correct cover is used. 3. Replace the left screw cover as shown.
11 0 Chapter 3 5. Replace the four (4) screws securing the LCD Module to the Upper Cover. 6. Ensure that the Hinge Covers are replaced correctly . Identify the rear edge of the covers by the two (2) securing clip s. 7. Align the left Hinge C over as shown and p ress down to replace the cover .
Chapter 3 111 9. Replace the micro pho ne cable. a. Place the microphone assembly in the upper cover . b. Fold over the foil tab to secure. c. Connect the microphone cable to the mainboa rd. 10. Run the white Antenna cable along the cable channel as shown using all available retaining clips.
11 2 Chapter 3 11 . Run the LCD cable alo ng the cable channel using all available cable clips. 12. Conn ect the LCD cable to the Mainboard as shown. 13. S tand the computer on the L CD Panel and pass the Antenna cab les through the chassis. 14. The Upper Cover appears as shown when the Ant enna and LCD cables are correctly installed.
Chapter 3 11 3 15. T urn the computer over . Run the Antenna cables alon g the cab le channel as show n, using all availa ble cable clips. 16. Replace the two (2) screws securing the LCD Module to the Lower Cover .
11 4 Chapter 3 Replacing the Keyboard 1. Connect the Keyboard FFC to the Mainboard and cl os e the locking latch to secure the cable in pl ace. 2. T urn the Keyboard over and insert it fron t edge first into the chassis. NOTE: Ensure that the six (6) locating tabs are correctly seated.
Chapter 3 11 5 Replacing the Switch Cover Replacing the Hard Disk Drive Module 1. Place the Switch Cover left side first on to the Upper Co ver . 2. Press down as indicated to snap the Switch Cover into place.
11 6 Chapter 3 2. Replace the four (4) screws (two each side) to secure the carrier . 3. Insert the HDD, as indica ted and lower it into place. 4. Slide the HDD in the direction of the arrow to connect the interface .
Chapter 3 11 7 Replacing the WLAN Module 1. Place the WLAN bracke t in th e mo du l e . 1. Replace two (2) screws to secure the WLAN bracket. 1. Insert the WLAN Module into the WLAN socket. 2. Replace the two (2) screws to secure the module. 3. Connect the two (2) An tenna cables to the modu le.
11 8 Chapter 3.
Chapter 3 11 9 Replacing the DIMM Modules Replacing the ODD Module 1. Insert the DIMM Module in place. 2. Press down to lock the DIMM mod ule in place. 3. Repeat steps for the second DIMM module if present. 1. Press the bezel into the tr ay , bottom edge first, to secure it to the ODD Module.
120 Chapter 3 Replacing the Lower Covers Replacing the SD Dummy Card 1. Replace the Memory Cover as shown. 2. Replace the HDD Cover as shown. IMPORT ANT : Press down around the perimeter of the covers to ensure that the all the secu ring tabs are correctly located in the casing.
Chapter 3 121 Replacing the Battery 1. Slide and hol d the battery rele ase latch to the release po sition (1) , insert t he battery pack an d press down (2).
122 Chapter 3.
Chapter 4 123 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
124 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llow ing actions one at a time to correct the problem.
Chapter 4 125 No Display Issue If the Displa y doesn’t work, perform the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem.
126 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
Chapter 4 127 LCD Failure If the LCD fails, perform the following actions one at a ti me to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the pro blem.
128 Chapter 4 TouchPad Failure If the To u c h P a d doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the probl em.
Chapter 4 129 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager .
130 Chapter 4 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac ti ons one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.
Chapter 4 131 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits a.
132 Chapter 4 a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-cl ick on the device and click Enable . b. Double-click DVD/C D-RO M dri ves . If the device displays a down arrow , right-click on the device and click Enable .
Chapter 4 133 b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable.
134 Chapter 4 Wireless Function Failure If the WLAN fails, perform th e following actions one at a time to correct th e probl em. Do not replace a non- defective FRUs: Thermal Unit Failure If the Thermal Unit fails, perform the follo wing actions one at a time to correct the problem.
Chapter 4 135 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t th e problem. 1. T ry an alternative mouse. 2. If the mouse uses a wireless connection, i nsert new batteries and confirm there is a good co nnection.
136 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothin g to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
Chapter 4 137 Post Codes Sec: NO_EVICTION_MODE_DEBUG EQU 1 (Comm onPlatformsecIa32SecCore.inc) Memory: DEBUG_BIOS equ 1 (ChipsetAlvisoMemoryInitAsm IA32IMEMORY .INC) Code Description 0xC2 MTRR setup 0xC3 Enable cache 0xC4 Establish cache tags 0xC5 Enter NEM, Place the BSP in No Fill mode, set CR0.
138 Chapter 4 0x28 Enable all clocks on popu lated rows 0x29 Perform JEDEC memory init ialization for all memory rows 0x30 Perform steps required after memory init 0x31 Program DRAM throttling an d th.
Chapter 4 139 BDS & Specific action: Each PEIM entry point used in 80_PORT Code Description 0x00 Report the legacy boot is happening 0x12 W ake up the Aps 0x13 Initialize SMM Private Data and relo.
140 Chapter 4 0x07 PEI_PCI_CFG 0x08 PEI_CPU_PEIM 0x09 PEI_PLA TFORM_ST AGE1 0x0A PEI_V ARIABLE 0x0B PEI_SB_INIT 0x0C PEI_CAPSULE 0x0D PEI_PLA TFORM_ST AGE2 0x0E PEI_SB_SMBUS_ARP_DISABLED 0x0F PEI_HOST.
Chapter 4 141 Each Driver entry point used in 80_PORT Code Description 0x30 RESERVED 0x31 DXE_CRC32_SECTION_EXTRACT 0x32 SCRIPT_SA VE 0x33 ACPI_S3_SA VE 0x34 SMART_TIMER 0x35 JPEG_DECODER 0x36 PCX_DEC.
142 Chapter 4 0x5A CON_PLA TFORM 0x5B SA VE_MEMORY_CONFIG 0x5C ACPI_SUPPORT 0x5D CON_SPLITTER_UGA_ VGA / CON_SPLITTER 0x5E VGA_CLASS 0x5F DA T A_HUB 0x60 DISK_IO 0x61 MEMORY_TEST 0x62 CRISIS_RECOVERY .
Chapter 4 143 0x85 BIOS_SNP16 0x86 BUS_PCI_UNDI 0x87 SETUP_MOUSE 0x88 OEM_SETTING 0x89 MONITOR_KEY 0x8A PLA TFORM_BDS 0x8B F AU L T_TOLERANT_WRITE 0x8C UPDA TE_DISP A TCHER 0x8D CHINESE 0x8E TPM_S3_Re.
144 Chapter 4 Each SmmDriver entry poi nt used in 80_PORT * If the BIOS detect s error 2C, 2E, or 30 (base 512K RAM error), it di splays an additional word-bitmap (xxxx) indicating the address line or bi ts that failed. For example, 2C 0002 means address line 1 (bit one set) has failed.
Chapter 5 145 Jumper and Connector Locations Top View Item Description JL VDS1 LCD Connector JP14 Power/B Connector JSPK1 S peaker(Left) Connector JMIC2 Microphone Con nector JKB1 Internal Keyboard Connector for 15.6” JTP1 T ouch Pad Connector U1 1 South Bridge SW4 T ouch pad (Left) Button for 15.
146 Chapter 5 Bottom View ITEM DESCRIPTION PJP1 AC-IN Connector JRJ45 R J45 Connec tor JC RT 1 CRT Co nn ec t or JP12 Fan Connector JUSB1 USB Connector JUSB2 USB Connector JMIC1 MIC-In Jack JHP1 Head-.
Chapter 5 147 Power Board ITEM DESCRIPTION ITEM DESCRIPTION U1 Lid Switch LED1 ON/OFF LED SW1 TP Lock Button LED5 Wireless LED SW2 O N/OFF Button LED3 Media LED SW3 W ireless Button LED4 Num LED LED7 .
148 Chapter 5 Clearing Password Check and BIOS Recovery This section provides you with the st and ard operating procedures of clearing password and BIOS reco very for eMachine HM52-MV . The machi ne provid es one Hardware Open Gap on main board for clearing password check, and one Hotke y for enabling BIOS Reco very .
Chapter 5 149 Clear CMOS Jumper Item Description J1 Cl ear CMOS Jumper J1.
150 Chapter 5 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
Chapter 6 151 FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field R eplaceable Unit) listing in global configurat ions of JE50_MV . Refer to this chapter whenever ordering for parts to repair or fo r RMA (Return Merchan dise Author ization).
152 Chapter 6 JE50_MV Exploded Diagrams Main Assembly No. Description Acer P/N 1 Middle Cover 60.NAF02.003 2 Mainboard MB.NAK02 .001 3 Hinge Caps 42.NAF02.001 4 Up Cap (R) 42.NAF 02.002 Up Cap (L) 42.NAF02.003 5 Upper Cover 60.NAF02.001 6 Thermal Module 60.
Chapter 6 153 Rear Assembly No. Description Ac er P/N 1 DIMM Door 42.NAF02.005 2 HDD Door 42.NAF02.004 3 HDD Door Mylar N/A 4 Lower Cover 60.NAF02.002 5W L A N M y l a r N / A 1 2 3 4 5.
154 Chapter 6 LCD Assembly No. Description Ac er P/N 1 LCD Bezel 60.NAF02.005 2 Antenna (Main) 50.NAF02.002 Antenna (Aux) 50.NAF0 2.003 3 LCD Brackets 33.NAF02.005 4 LCD Cable 50.NAF02.004 5 LCD Cover 60.NAF0 2.004 6 Hinge N/A 7 LCD S ponge N/A 8 Camera 0.
Chapter 6 155 JE50_MV FRU List Category Acer Description Acer PN ADAPTER ADAPTER DEL T A 65W 19V 1.7X5.5X1 1 YELLOW ADP-65JH DB A, L V5 LED LF AP .06501.026 ADAPTER LITE-ON 65W 19V 1.7X5.5X1 1 YELLOW P A-1650-22AC L V5 LED LF AP .06503.024 ADAPTER HIPRO 65W 19V 1.
156 Chapter 6 CABLE TP FFC 50.NAF02. 001 POWER CORD US 3 PIN 27.T A VV5.001 POWER CORD EU 3 PIN 27.T A VV5.002 POWER CORD AUS 3 PIN 27.T A VV5.003 POWER CORD UK 3 PIN 27.T A VV5.004 POWER CORD CHINA 3 PIN 27.T A VV5.005 POWER CORD SWISS 3 PIN 27.T A VV5.
Chapter 6 157 UP CAP-R 42.NAF02.00 2 UP CAP-L 42.NAF02.00 3 HDD DOOR 42.NAF02.004 RAM DOOR 42.NAF02.0 05 TP BRACKET 33.NAF02.001 HDD CARRIER 33.NAF02.002 MINI CARD BRACKET 33.NAF02.003 CPU/PROCESSOR CPU INTEL CELERON 900 PGA 2.2G 1M 800 35W KC.N0001.900 CPU INTEL CELERON T3100 PGA 1.
158 Chapter 6 HDD/HARD DISK DRIVE HDD TOSHIBA 2.5" 5400RPM 160GB MK1665GSX, CAPRICORN BS, 320G/P SA T A 8MB LF F/W:GJ002J KH.16004.008 HDD TOSHIBA 2.5" 5400RPM 250GB MK2565GSX, CAPRICORN BS, 320G/P SA T A 8MB LF F/W:GJ002J KH.25004.005 HDD HGST 2.
Chapter 6 159 Keyboard ACER EM7T_A 10B HM52/J E50/BA51 Internal 17 S tandard 104KS Black Hungarian T exture KB.I170A.270 Keyboard ACER EM7T_A 10B HM52/J E50/BA51 Internal 17 S tandard 104KS Black Norwegian T exture KB.I170A.275 Keyboard ACER EM7T_A 10B HM52/J E50/BA51 Internal 17 S tandard 104KS Black Portugue se T extu re KB.
160 Chapter 6 ODD BEZEL-SM 42.NAF02.006 LCD ASSY LCD MODULE 15.6"W WXGA GLARE w/ ANTENNA*2, CCD 6M.PVS02.002 LCD COVER IMR 60.PVT02.002 LCD BEZEL FOR W /CMOS 60.
Chapter 6 161 LCD CABLE FOR W/CMOS 50.NAF02.004 LCD BRACKET R&L 33.NAF02.005 INVER TER 19.NAF02. 001 CAMERA 0.3M 57.NAE02.0 0 1 LCD P ANEL CCFL LCD LPL 15.6"W WXGA Glare LP156WH1- TLA3 LF 220nit 8ms 400:1 LK.1560 8.006 LCD CMO 15.6" WXGA Glare N156B3-L02 LF 220nit 8ms LK.
162 Chapter 6 MEMOR Y MEMORY HYNIX SO-DIMM DDRIII 1066 1GB HMT1 12S6BFR6C-G7 N0 LF 64*16 0.055UM KN.1GB0G .025 MEMORY ELPIDA SO-DIMM DDRIII 1066 1GB EBJ1 1UE6BBS0-AE-F LF 64*16 0.065UM KN.1GB09.01 1 MEMORY ELPIDA SO-DIMM DDRIII 1333 1GB EBJ10UE8BDS0-DJ-F LF 128*8 0.
Chapter 6 163 Screw List Screw Acer Description Acer PN SCREW SCREW M2.48D 4.0L K 5 .5D 0.8T ZKNL 86.NAF02.001 SCREW SCREW M2.48D 6.0L K 5 .5D 0.8T ZKNL 86.NAF02.002 SCREW SCREW M2.45D 8.0L K 5 .5D 0.8T ZKNL 86.NAF02.003 SCREW SCREW M1.98D 3.0L K 4 .6D 0.
Appendix A 164 Model Definition and Configuration AS5334 Model RO Country Acer Part No Description AS5334- 31 1G16Mn EMEA Algeria LX.PVS0C.00 6 AS5334-31 1G16Mn L INPUS MADZ1 UMACkk_3 1*1G/160/6L2.2/5R/ CB_bgn_1.3C_HG_FRH1 AS5334- 31 1G16Mn EMEA Middle East LX.
165 Appendix A AS5334- 312G25Mn kk EMEA Middle East LX.PVS0C.02 2 AS5334-312G25Mnkk LINPUS MAME3 UMACkk_3 2*1G/250/6L2.2/5R/ CB_bgn_1.3C_HG_FRH1 AS5334- 312G25Mn kk EMEA Middle East LX.PVS0C.02 3 AS5334-312G25Mnkk LINPUS MAME9 UMACkk_3 2*1G/250/6L2.2/5R/ CB_bgn_1.
Appendix A 166 AS5334- 314G64Mn EMEA South Africa LX.PVS02. 051 AS5334-314G64Mn EM W7HP64EMA TZA2 MC UMACkk_3 2*2G/640/6L2.2/5R/ CB_bgn_1.3C_HG_ES61 AS5334- 332G16Mn EMEA South Africa LX.PVS01.01 1 AS5334-332G16Mn EM W7HB64EMA TZA2 MC UMACkk_3 1*2G/160/6L2.
167 Appendix A AS5334- 332G64Mn EMEA South Africa LX.PVS02. 059 AS5334-332G64Mn EM W7HP64EMA TZA2 MC UMACkk_3 1*2G/640/6L2.2/5R/ CB_bgn_1.3C_HG_ES61 AS5334- 334G25Mn EMEA South Africa LX.PVS02. 047 AS5334-334G25Mn EM W7HP64EMA TZA2 MC UMACkk_3 2*2G/250/6L2.
Appendix A 168 AS5334- 902G16Mn kk P A ACLA-S panish LX.PVS0C.02 7 AS5334-902G16Mnkk LINPUS MAEA4 UMACkk_3 1*2G/160/6L2.2/5R/ CB_bgn_1.3C_HG_XS31 AS5334- 902G16Mn kk P A Chile LX.PVS0C.02 8 AS5334-902G16Mnkk LINPUS MACL3 UMACkk_3 1*2G/160/6L2.2/5R/ CB_bgn_1.
169 Appendix A AS5334- 902G25Mn EMEA Czech LX.PVS02.027 AS533 4-902G25Mn W7HP64A TCZ2 MC UMACkk_3 1*2G/250/6L2.2/5R/ CB_bgn_1.3C_HG_SK1 1 AS5334- 902G25Mn EMEA Denmark LX.PVS02.007 AS 5334-902G25Mn W7HP64A TDK2 MC UMACkk_3 1*2G/250/6L2.2/5R/ CB_bgn_1.
Appendix A 170 AS5334- 902G25Mn EMEA Middle East LX.PVS02. 026 AS5334-902G25Mn EM W7HP64EMA TME3 MC UMACkk_3 1*2G/250/6L2.2/5R/ CB_bgn_1.3C_HG_ES81 AS5334- 902G25Mn EMEA Middle East LX.PVS02. 033 AS5334-902G25Mn EM W7HP64EMA TME2 MC UMACkk_3 1*2G/250/6L2.
171 Appendix A AS5334- 902G25Mn EMEA South Africa LX.PVS02. 042 AS5334-902G25Mn EM W7HP64EMA TZA2 MC UMACkk_3 1*2G/250/6L2.2/5R/ CB_bgn_1.3C_HG_ES61 AS5334- 902G25Mn EMEA Sp ain LX.PVS02.008 AS5334-902G25Mn W7HP64A TES1 MC UMACkk_3 1*2G/250/6L2.2/5R/ CB_bgn_1.
Appendix A 172 AS5334- 31 1G16Mn Middle East LX.PVS08.006 AS5334_U MACkk_3 CMT 3100 N15.6 WXGA G UMA N AS5334- 31 1G16Mn Middle East LX.PVS0C.002 AS5334_U MACkk_3 CMT 3100 N15.6 WXGA G UMA N AS5334- 31 1G16Mn Middle East LX.PVS0C.005 AS5334_U MACkk_3 CMT 3100 N15.
173 Appendix A AS5334- 312G32Mn South Africa LX.PVS0 2.056 AS5334_U MACkk_3 CMT 3100 N15.6 WXGA G UMA N AS5334- 312G50Mn South Africa LX.PVS0 1.007 AS5334_U MACkk_3 CMT 3100 N15.6 WXGA G UMA N AS5334- 312G50Mn South Africa LX.PVS0 2.057 AS5334_U MACkk_3 CMT 3100 N15.
Appendix A 174 AS5334- 332G25Mn South Africa LX.PVS0 1.012 AS5334_U MACkk_3 CMT 3300 N15.6 WXGA G UMA N AS5334- 332G25Mn South Africa LX.PVS0 2.062 AS5334_U MACkk_3 CMT 3300 N15.6 WXGA G UMA N AS5334- 332G32Mn South Africa LX.PVS0 1.013 AS5334_U MACkk_3 CMT 3300 N15.
175 Appendix A AS5334- 902G16Mn South Africa LX.PVS0 1.001 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G16Mn UK LX.PVT02.00 1 AS5334_U MAkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G16Mn kk ACLA- Portuguese LX.PVS0C.025 AS533 4_U MACkk_3 CM9 00 N15.
Appendix A 176 AS5334- 902G25Mn Belgium LX.PVS02.018 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Chile LX.PVS08.005 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Cyprus LX.PVS02.012 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Czech LX.
177 Appendix A AS5334- 902G25Mn Italy LX.PVS02.009 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Luxembour g LX.PVS02.024 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Middle East LX.PVS02.025 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Middle East LX.
Appendix A 178 AS5334- 902G25Mn South Africa LX.PVS0 2.042 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn S pain LX.PVS02.008 AS5334_U MACkk_3 CM9 00 N15.6 WXGA G UMA N AS5334- 902G25Mn Switzerland LX.PVS02.017 AS5334_U MACkk_3 CM9 00 N15.
179 Appendix A AS5334- 31 1G16Mn Middle East LX.PVS0C.005 SO1GBI II10 N N160GB5.4K S N AS5334- 31 1G16Mn kk Middle East LX.PVS0C.019 SO1GBI II10 N N160GB5.4K S N AS5334- 31 1G16Mn kk Middle East LX.PVS0C.020 SO1GBI II10 N N160GB5.4K S N AS5334- 31 1G25Mn Middle East LX.
Appendix A 180 AS5334- 314G32Mn South Africa LX.PVS02.053 SO2GBI II10 SO2GBI II10 N320GB5.4K S McAfee AS5334- 314G32Mn UK LX.PVT02.003 SO2GBI II10 SO2GBI II10 N320GB5.4K S McAfee AS5334- 314G50Mn South Africa LX.PVS02.052 SO2GBI II10 SO2GBI II10 N500GB5.
181 Appendix A AS5334- 902G16Mn ACLA- Sp a n i s h LX.PVS0C.008 SO2GBI II10 N N160GB5.4K S N AS5334- 902G16Mn ACLA- Sp a n i s h LX.PVS0C.009 SO2GBI II10 N N160GB5.4K S N AS5334- 902G16Mn Chile LX.PVS0C.010 SO2GBI II10 N N160GB5.4K S N AS5334- 902G16Mn South Africa LX.
Appendix A 182 AS5334- 902G25Mn Cyprus LX.PVS02.012 SO2GBI II10 N N250GB5.4K S McAfee AS5334- 902G25Mn Czech LX.PVS02.027 SO2GBI II10 N N250GB5.4K S McAfee AS5334- 902G25Mn Denmark LX.PVS02.007 SO2GBI II10 N N250GB5.4K S McAfee AS5334- 902G25Mn Eastern Europe LX.
183 Appendix A AS5334- 902G25Mn Middle East LX.PVS02.043 SO2GBI II10 N N250GB5.4K S McAfee AS5334- 902G25Mn Middle East LX.PVS02.044 SO2GBI II10 N N250GB5.4K S McAfee AS5334- 902G25Mn Poland LX.PVS02.021 SO2GBI II10 N N250GB5.4K S McAfee AS5334- 902G25Mn Portugal LX.
Appendix A 184 AS5339 AS5734Z Model RO Country Acer Part No Description AS5339- 302G16Mn WW WW S2.PVT02.001 AS5339-302G16Mn W7HP64AWW1 MC UMAkk_3 2*1G/160/6L2.2/ CB_bgn_HG_ES62_T est BOM AS5339- 902G16Mn WW WW S2.PVS02.001 AS5339-9 02G16Mn W7HP64AWW1 MC UMACkk_3 1*2G/160/6L2.
185 Appendix A AS5734Z- 442G25Mn EMEA Middle East LX.PXN0C.01 7 AS5734Z-442G25Mn L INPUS MAME9 UMACkk_3 1*2G/250/6L2.2 /5R/ CB_bgn_1.3C_HG_ FRH1 AS5734Z- 442G25Mn EMEA Middle East LX.PXN0C.01 8 AS5734Z-442G25Mn L INPUS MAME3 UMACkk_3 1*2G/250/6L2.2 /5R/ CB_bgn_1.
Appendix A 186 AS5734Z- 443G25Mi EMEA Russia LX.PXN0C.01 5 AS5734Z-443G25Mi L INPUS MARU1 UMACkk_3 2G+1G/250/6L2.2/5R / CB_bg_1.3C_HG_RU81 AS5734Z- 443G32Mi EMEA Russia LX.PXN02.04 5 AS5734Z-443G32Mi W7HP64RUA TRU1 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bg_1.
187 Appendix A AS5734Z- 443G32Mn EMEA Germany LX.PXN02.02 9 AS5734Z-443G32Mn W 7HP64A TDE1 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_1.3C_HG_DE1 1 AS5734Z- 443G32Mn EMEA Greece LX.PXN02.00 4 AS5734Z-443G32Mn W 7HP64A TGR1 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_1.
Appendix A 188 AS5734Z- 443G32Mn EMEA Middle East LX.PXN02.04 3 AS5734Z-443G32Mn EM W7HP64EMA TME2 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_1.3C_HG_ ES61 AS5734Z- 443G32Mn EMEA Middle East LX.PXN02.04 4 AS5734Z-443G32Mn EM W7HP64EMA TME4 MC UMACkk_3 2G+1G/320/6L2.
189 Appendix A AS5734Z- 443G32Mn kk EMEA Eastern Europe LX.PXN0C.02 5 AS5734Z-443G32Mnkk L INPUS MAEU7 UMACkk_3 2G+1G/320/6L2.2/ 5R/CB_bgn_1.3C_HG_ SL21 AS5734Z- 443G32Mn kk EMEA South Africa LX.PXN01.01 3 AS5734Z-443G32Mnkk EM W7HB64EMA TZA2 MC UMACkk_3 2G+1G/320/6L2.
Appendix A 190 AS5734Z- 444G32Mn kk P A ACLA-S panish LX.PXN02.09 6 AS5734Z-444G32Mnkk EM W7HP64EMA TEA4 MC UMACkk_3 2*2G/320/6L2.2/5 R/ CB_bgn_1.3C_HG_ EN31 AS5734Z- 444G32Mn kk P A Chile LX.PXN02.09 7 AS5734Z-444G32Mnkk EM W7HP64EMA TCL3 MC UMACkk_3 2*2G/320/6L2.
191 Appendix A AS5734Z- 452G25Mn P A ACLA-Sp anish LX.PXN08.00 2 AS5734Z-452G25Mn EM W7ST32EMA TEA1 MC UMACkk_3 1*2G/250/6L2.2/5 R/ CB_bgn_1.3C_HG_ ES51 AS5734Z- 452G25Mn P A ACLA-Sp anish LX.PXN08.00 3 AS5734Z-452G25Mn EM W7ST32EMA TEA4 MC UMACkk_3 1*2G/250/6L2.
Appendix A 192 AS5734Z- 452G32Mn kk EMEA Middle East LX.PXN01.01 1 AS5734Z-452G32 M nkk EM W7HB64EMA TME2 MC UMACkk_3 1*2G/320/6L2.2/5 R/ CB_bgn_1.3C_HG_ AR21 AS5734Z- 452G32Mn kk AAP Singapore LX.PXN02.1 10 AS5734Z-452G32Mnkk W7HP64A TSG1 MC UMACkk_3 1*2G/ 320/6L2.
193 Appendix A AS5734Z- 453G32Mn P A Chile LX.PXN02.06 3 AS5734Z-453G32Mn EM W7HP64EMA TCL3 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_1.3C_HG_ ES51 AS5734Z- 453G32Mn EMEA Germany LX.PXP02.002 AS5 734Z-453G32Mn W7HP64A TDE1 MC UMAkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_HG_DE1 1 AS5734Z- 453G32Mn EMEA UK LX.
Appendix A 194 AS5734Z- 453G32Mn kk EMEA Holland LX.PXN02.12 4 AS5734Z-453G32Mnkk W7HP64ASNL1 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_1.3C_HG_ NL1 1 AS5734Z- 453G32Mn kk EMEA Israel LX.PXN02.12 5 AS5734Z-453G32Mnkk W 7HP64ASIL1 MC UMACkk_3 2G+1G/320/6L2.
195 Appendix A AS5734Z- 453G32Mn kk EMEA Middle East LX.PXN02.14 3 AS5734Z-453G32Mnkk EM W7HP64EMASME2 MC UMACkk_3 2G+1G/320/6L2.2/5R/ CB_bgn_1.3C_HG_ ES61 AS5734Z- 453G32Mn kk EMEA Middle East LX.PXN0C.02 8 AS5734Z-453G32Mnkk L INPUS MAME2 UMACkk_3 2G+1G/320/6L2.
Appendix A 196 AS5734Z- 454G25Mn PA A C L A - Portuguese LX.PXN02.06 4 AS5734Z-454G25Mn EM W7HP64EMA TXC3 MC UMACkk_3 2*2G/250/6L2.2/5 R/ CB_bgn_1.3C_HG_ EN61 AS5734Z- 454G25Mn P A ACLA-Sp anish LX.PXN02.06 5 AS5734Z-454G25Mn EM W7HP64EMA TEA3 MC UMACkk_3 2*2G/250/6L2.
197 Appendix A AS5734Z- 454G32Mn kk P A Canada LX.PXN02.09 0 AS5734Z-454G32Mnkk W7HP64A TCA2 MC UMACkk_3 2*2G/ 320/6L2.2/5R/C B_bgn_1.3C_HG_FR8 1 AS5734Z- 454G32Mn kk EMEA Italy LX.PXN02.09 9 AS5734Z-454G32Mnkk W 7HP64A TIT1 MC UMACkk_3 2*2G/320/6L2.2/5R/ CB_bgn_1.
Appendix A 198 AS5734Z- 442G16Mn WW S2.PXN02.001 AS 5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 442G16Mn kk Middle East LX.PXN0C.027 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 442G25Mn Eastern Europe LX.PXN0C.020 AS5734Z _UMACk k_3 PMDT 4400 N15.
199 Appendix A AS5734Z- 442G32Mn kk Singapor e LX.PXN02.109 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 443G25Mi Russia LX.PXN01.001 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 443G25Mi Russia LX.PXN0C.015 AS5734Z _UMACk k_3 PMDT 4400 N15.
Appendix A 200 AS5734Z- 443G32Mn Eastern Europe LX.PXN02.019 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 443G32Mn France LX.PXN0 2.002 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 443G32Mn Germany L X.PXN02.029 AS5734Z _UMACk k_3 PMDT 4400 N15.
201 Appendix A AS5734Z- 443G32Mn Middle East LX.PXN02.043 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 443G32Mn Middle East LX.PXN02.044 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 443G32Mn Middle East LX.PXN0C.019 AS5734Z _UMACk k_3 PMDT 4400 N15.
Appendix A 202 AS5734Z- 443G50Mn kk Italy LX.PXN02.107 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 444G25Mn ACLA- Portugue se LX.PXN02.083 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 444G25Mn ACLA- Sp a n i s h LX.PXN02.084 AS5734Z _UMACk k_3 PMDT 4400 N15.
203 Appendix A AS5734Z- 444G50Mn Luxembo urg LX.PXN02.071 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 444G50Mn Middle East LX.PXN01.008 AS5734Z _UMACk k_3 PMDT 4400 N15.6WX GAG UMA N AS5734Z- 444G50Mn kk Eastern Europe LX.PXN0C.023 AS5734Z _UMACk k_3 PMDT 4400 N15.
Appendix A 204 AS5734Z- 452G25Mn Chile LX.PXN0 8.004 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 452G25Mn UK LX.PXN02.058 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 452G25Mn kk ACLA- Sp a n i s h LX.PXP08.002 AS5734Z _UMAkk _3 PMDT 4500 N15.
205 Appendix A AS5734Z- 453G25Mn kk USA LX.PXP02.001 AS5734Z _UMAkk _3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 453G32Mi kk Russia LX.PXN02.145 AS 5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 453G32Mn ACLA- Portugue se LX.PXN02.059 AS5734Z _UMACk k_3 PMDT 4500 N15.
Appendix A 206 AS5734Z- 453G32Mn kk Denmark L X.PXN02.091 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 453G32Mn kk France LX.PXN02.120 AS5 734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 453G32Mn kk Germany LX.PXN02.1 13 AS5734Z _UMACk k_3 PMDT 4500 N15.
207 Appendix A AS5734Z- 453G32Mn kk Middle East LX.PXN02.143 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 453G32Mn kk Middle East LX.PXN0C.028 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 453G32Mn kk Singapor e LX.PXN0C.032 AS5734Z _UMACk k_3 PMDT 4500 N15.
Appendix A 208 AS5734Z- 454G25Mn ACLA- Sp a n i s h LX.PXN02.067 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 454G25Mn Chile LX.PXN0 2.068 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 454G25Mn kk USA LX.PXN02.105 AS5734Z _UMACk k_3 PMDT 4500 N15.
209 Appendix A AS5734Z- 454G50Mn South Africa LX.PXN02.051 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 454G50Mn UK LX.PXN02.050 AS5734Z _UMACk k_3 PMDT 4500 N15.6WX GAG UMA N AS5734Z- 454G50Mn kk Canada LX.PXN02.092 AS5734 Z _UMACk k_3 PMDT 4500 N15.
Appendix A 210 AS5734Z- 442G32Mn Middle East LX.PXN01.00 9 SO2GBIII1 0 N N320G B5.4KS McAfee AS5734Z- 442G32Mn Middle East LX.PXN08.00 5 SO2GBIII1 0 N N320G B5.4KS McAfee AS5734Z- 442G32Mn Middle East LX.PXN0C.003 SO2GBIII1 0 N N320G B5.4KS N AS5734Z- 442G32Mn Middle East LX.
21 1 Appendix A AS5734Z- 443G32Mn Eastern Europe LX.PXN02.018 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 443G32Mn Eastern Europe LX.PXN02.019 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 443G32Mn France LX.PXN02.002 SO2GBIII1 0 SO1GBIII1 0 N320G B5.
Appendix A 212 AS5734Z- 443G32Mn South Africa LX.PXN02.035 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 443G32Mn South Africa LX.PXN02.038 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 443G32Mn South Africa LX.PXN02.042 SO2GBIII1 0 SO1GBIII1 0 N320G B5.
213 Appendix A AS5734Z- 444G32Mn kk ACLA- Sp a n i s h LX.PXN02.095 SO2GBIII1 0 SO2GBIII1 0 N320G B5.4KS McAfee AS5734Z- 444G32Mn kk ACLA- Sp a n i s h LX.PXN02.096 SO2GBIII1 0 SO2GBIII1 0 N320G B5.4KS McAfee AS5734Z- 444G32Mn kk Chile LX.PXN02.097 SO2GBIII1 0 SO2GBIII1 0 N320G B5.
Appendix A 214 AS5734Z- 452G25Mn ACLA- Sp a n i s h LX.PXN0C.021 SO2GBIII1 0 N N250G B5.4KS N AS5734Z- 452G25Mn Canada LX.PXN02.088 SO2GBIII1 0 N N250G B5.4KS McAfee AS5734Z- 452G25Mn Chile LX.PXN08.004 SO2GBIII1 0 N N250G B5.4KS McAfee AS5734Z- 452G25Mn UK LX.
215 Appendix A AS5734Z- 453G32Mi kk Russia LX.PXN02.145 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 453G32Mn ACLA- Portuguese LX.PXN02.059 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 453G32Mn ACLA- Sp a n i s h LX.PXN02.060 SO2GBIII1 0 SO1GBIII1 0 N320G B5.
Appendix A 216 AS5734Z- 453G32Mn kk Holland LX.PXN02.124 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 453G32Mn kk Israel LX.PXN02.125 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 453G32Mn kk Israel LX.PXN02.139 SO2GBIII1 0 SO1GBIII1 0 N320G B5.
217 Appendix A AS5734Z- 453G32Mn kk South Africa LX.PXN01.012 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 453G32Mn kk South Africa LX.PXN02.128 SO2GBIII1 0 SO1GBIII1 0 N320G B5.4KS McAfee AS5734Z- 453G32Mn kk South Africa LX.PXN02.129 SO2GBIII1 0 SO1GBIII1 0 N320G B5.
Appendix A 218 AS5734Z- 454G32Mn ACLA- Sp a n i s h LX.PXN02.076 SO2GBIII1 0 SO2GBIII1 0 N320G B5.4KS McAfee AS5734Z- 454G32Mn ACLA- Sp a n i s h LX.PXN02.077 SO2GBIII1 0 SO2GBIII1 0 N320G B5.4KS McAfee AS5734Z- 454G32Mn Chile LX.PXN02.078 SO2GBIII1 0 SO2GBIII1 0 N320G B5.
Appendix B 219 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of it s system functions are tested under Windows ® 7 environment. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests.
220 Appendix B Microsoft ® Windows ® 7 Environment Test V end or Ty p e Description A cover Quanta Wistron Normal wi IMR Normal wi IMR Quanta Wistron Normal wi IMR Normal wi IMR Quanta Wistron Normal wi IMR Normal wi IMR Quanta Wistron Normal wi IMR Normal wi IMR Adapter Chicony Power 65W Adapter Chicony Power 65W 19V 1.
Appendix B 221 LITE-ON 65W Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ellow P A-1650-69AW , L V5, Low profile LED LF LITE-ON 65W Adapter LITE-ON 65W 19V 1. 7x5.5x1 1 Y ellow P A-1650-22AC L V5 LED LF LITE-ON 65W Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ellow P A-1650-69AW , L V5, Low profile LED LF LITE-ON 65W Adapter LITE-ON 65W 19V 1.
222 Appendix B SIMPLO 6CEL L2.2 Battery SIMPLO AS-2009 A Li-Ion 3S2P P ANASONIC 6 cell 4400mAh Main COMMON Panasonic 2.2Ah ( CG ) SIMPLO 6CEL L2.2 Battery SIMPLO AS-2009A Li-Ion 3S2P LGC 6 cell 4400mAh Main COMMON LGC 2.2Ah(S3 ) SIMPLO 6CEL L2.2 Battery SIMPLO AS- 2009A Li-Ion 3S2P SAMSUNG 6 cell 4400mAh Main COMMON SDI 2.
Appendix B 223 CPU INTEL CM585 CPU Intel Celero n 585 PGA 2.16G 1M 667 MV INTEL CM585 CPU Intel Celero n 585 PGA 2.16G 1M 667 MV INTEL CM900 CPU Intel Cele ro n 900 PGA 2.2G 1M 800 35W INTEL CM900 CPU Intel Cele ro n 900 PGA 2.2G 1M 800 35W INTEL CMT1700 CPU Intel CeleronM T1700 PGA 1.
224 Appendix B HGST N5 00GB5.4KS HDD HGST 2.5" 5400rpm 500GB HTS54 505 0B9A300 Panther B SA T A LF F/W:C60F Disk imbalance criteria = 0.014g-cm HGST N5 00GB5.4KS HDD HGST 2.5" 5400rpm 500GB HTS54 505 0B9A300 Panther B SA T A LF F/W:C60F Disk imbalance criteria = 0.
Appendix B 225 TOSHIBA N250GB5.4KS HDD TOSHIBA 2.5" 5400r pm 250GB MK2565GSX, Capri corn BS, 320G/P SA T A 8MB LF F/W:GJ002J TOSHIBA N250GB5.4KS HDD TOSHIBA 2.5" 5400r pm 250GB MK2565GSX, Capri corn BS, 320G/P SA T A 8MB LF F/W:GJ002J TOSHIBA N320GB5.
226 Appendix B WD N320GB5.4KS HDD WD 2.5" 5400rpm 320GB WD3200BEVT- 22A23T0,ML320S,WD SA T A 8MB LF F/W:01.01A01 WD N320GB5.4KS HDD WD 2.5" 5400rpm 320GB WD3200BEVT-22ZCT0 ML160 SA T A LF F/W:1 1.01A1 1 WD N320GB5.4KS HDD WD 2.5" 5400rpm 320GB WD3200BEVT- 22A23T0,ML320S,WD SA T A 8MB LF F/W:01.
Appendix B 227 AUO N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B15 6XW01 V0 1A LF 220n it 8ms 500:1 AUO N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B156XW01-V2 LF 220nit 8ms 500:1 AUO N15.6WXGAG LCD AUO 15.6"W WXGA Glare B156XW01-V0 LF 220nit 8ms AUO N15.
228 Appendix B ELPIDA SO1GBIII10 Memory ELPIDA SO -DIMM DDRIII 1066 1GB EBJ10UE8BDS0- AE-F LF 128*8 0 .065um ELPIDA SO1GBIII10 Memory ELPIDA SO -DIMM DDRIII 1066 1GB EBJ10UE8BDS0- AE-F LF 128*8 0 .065um ELPIDA SO1GBIII10 Memory ELPIDA SO -DIMM DDRIII 1066 1GB EBJ10UE8BDS0- AE-F LF 128*8 0 .
Appendix B 229 SAMSUNG SO1GBIII10 Memory SAMSUNG SO-DIMM DDRIII 1066 1GB M471B2873EH1- CF8 LF 64*16 0.055um SAMSUNG SO1GBIII10 Memory SAMSUNG SO-DIMM DDRIII 1066 1GB M471B2873EH1- CF8 LF 64*16 0.055um SAMSUNG SO1GBIII10 Memory SAMSUNG SO-DIMM DDRIII 1066 1GB M471B2873EH1- CF8 LF 64*16 0.
230 Appendix B PLDS NSM8XS ODD PLDS Super-Multi DRIVE 12.7mm Tray DL 8X DS-8A4SH LF W/O bezel SA T A (HF + Windows 7) PLDS NSM8XS ODD PLDS Supe r-Multi DRIVE 12.7mm T ray DL 8X DS-8A3S LF W/O bezel HA18 SA T A (Windows 7) PLDS NSM8XS ODD PLDS Supe r-Multi DRIVE 12.
Appendix B 231 TOSHIBA NSM8XS ODD TOSHIBA Super-Multi DRIVE 12.7mm T ray DL 8X TS-L633B LF W/O bezel AC02 SA T A (Windows 7 ) TOSHIBA NSM8XS ODD TOSHIBA Super-Multi DRIVE 12.7mm T ray DL 8X TS-L633B LF W/O bezel SA T A TOSHIBA NSM8XS ODD TOSHIBA Super-Multi DRIVE 12.
232 Appendix B Foxconn 3rd WiFi 2x2 BGN Foxconn Wireless LAN Atheros HB93 2x2 BGN (HM) Foxconn 3rd WiFi 2x2 BGN Foxconn Wireless LAN Broadcomm 432 25 2x2 BGN (HM) T77H103.
Appendix C 233 Online Support Information This section describe s online techni cal support services a vailable to help you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office.
234 Appendix C.
235 A AFLASH Utility 31 Antennas Removing 87 Replacing 90 B Battery Replacing 121 Battery Pack Removing 46 BIOS ROM type 16 vendor 16 Version 16 BIOS Utility 23–31 Advanced 26 Boot 29 Exit 30 Naviga.
236 Removing 58 Replacing 114 Keyboard Failure 127 L LCD Bezel Removing 81 Replacing 96 LCD Brackets Removing 85 Replacing 93 LCD Cable Replacing 93 LCD Failure 127 LCD Module Removing 60 Replacing 10.
237 T ouchPad Removing 72 T ouchPad Bracket Removing 72 Replacing 101 T ouchPad Failure 128 T roublesho oting Built-in KB Failure 127 EasyTouch Buttons 134 HDTV Switch 135 Internal Micr ophone 129 Int.
238.
An important point after buying a device Aspire Digital 5334 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aspire Digital 5334 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aspire Digital 5334 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aspire Digital 5334 you will learn all the available features of the product, as well as information on its operation. The information that you get Aspire Digital 5334 will certainly help you make a decision on the purchase.
If you already are a holder of Aspire Digital 5334, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aspire Digital 5334.
However, one of the most important roles played by the user manual is to help in solving problems with Aspire Digital 5334. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aspire Digital 5334 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
