Instruction/ maintenance manual of the product D39GL64N0 Neff
Go to page of 16
[en] Instructions for installation and use Extractor hood.
2 Ú T able of contents [ e n ] I n s t r u c t i o n s f o r i n s t a l l a t i o n a n d u s e INSTRUCTION MANUAL ............................................................ 2 Important safety information ..........................................
3 Danger of suf focation! Packaging material is dangerous to children. Never allow children to play with packaging material. Danger of death! Risk of poisoning from flue gases that are drawn back in.
4 Risk of burns! The accessible parts become very hot when in operation. Never touch hot parts. Keep children at a safe distance. Risk of injur y! ■ Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down.
5 En vironmental pro tection Unpack the appliance and dispose of the packaging in an environmentally-responsible manner. En vironmental protection Operating modes This appliance can be used in exhaust-air mode or circulating- air mode.
6 Operation These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking.
7 Control panel model 2 Control panel Setting the fan Switching on the appliance ■ Press the # button. The fan starts at setting ƒ . ■ Press the + or - button to change the fan strength. Switching off Press the # button. Intensive se tting You can use the intensive setting if there is a large build-up of odours and fumes/vapours.
8 Cleaning and maintenance : Risk of burns! The appliance will become hot during operation, especially near the bulbs. Allow the appliance to cool down before cleaning. : Risk of electric shock! Penetrating moisture may result in an electric shock. Clean the appliance using a damp cloth only.
9 Remo ving metal mesh grease filter 1. Open the lock and fold down the metal grease filter. While doing this, place the other hand under the metal grease filter. 2. Take the metal grease filter out of the holder. For edge extraction filters, pull the metal grease filter downwards.
10 Af ter -sales ser vice Our after-sales service is there for you if your appliance needs to be repaired. We will always find the right solution in order to avoid unnecessary visits from a service technician. When calling us, please give the product number (E no.
11 INSTALLATION INSTRUCTIONS Installation instructions ■ This appliance is installed on the wall. ■ Follow the enclosed installation instructions for additional special accessories (e.g. for circulating-air mode). ■ The surfaces of the appliance are sensitive.
12 Room air-dependent heat-producing appliances (e.g. gas, oil, wood or coal- operated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open air through an exhaust gas system (e.
13 General information Exhaust air mode : Risk of death! Risk of poisoning from flue gases that are drawn back in. The exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft which is used to ventilate installation rooms that contain heating appliances.
14 Installation 1. Screw on the fixing bracket for the flue duct. ¨ 2. Screw on brackets for the extractor hood hand-tight, max. 3 Nm . © 3. Screw in threaded pin, leaving it protruding out of the wall by 5 - 9 mm. . ª Attaching and aligning the appliance 1.
15 Removing the safety caps If the safety caps must be removed, use a flat screwdriver. Connecting the pipes Note: If using an aluminium pipe, smooth the connection area beforehand. Exhaust-air pipe Ø 150 mm (recommended size) Attach the exhaust-air pipe directly to the air-pipe connector and seal.
931007 *9000852731* 9000852731 Constructa Neff Vertriebs-GmbH Carl-Wery-Straße 34 D-81739 München.
An important point after buying a device Neff D39GL64N0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Neff D39GL64N0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Neff D39GL64N0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Neff D39GL64N0 you will learn all the available features of the product, as well as information on its operation. The information that you get Neff D39GL64N0 will certainly help you make a decision on the purchase.
If you already are a holder of Neff D39GL64N0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Neff D39GL64N0.
However, one of the most important roles played by the user manual is to help in solving problems with Neff D39GL64N0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Neff D39GL64N0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
