Instruction/ maintenance manual of the product PDWXS 46-55 P NEC
Go to page of 10
– 1 – W all mount User’ s Manual Manuel de l’utilisateur du montage mural Manual de usuario para el montaje en par ed Bedienungsanleitung zur W andbefestigung Manuale Utente della staf fa a mu.
– 2 – Caution DO NOT mount the monitor yourself . Ask your dealer for assistance. For • proper ins tallati on it is strongl y recommend ed to use a trained , qualified technician. When installing the monitor vertically, do so in such a way that the control • button on the rear panel is at the bottom.
– 3 – Installation Procedure/Procédure d’installation/Procedimiento de instalación/ Installationsv erf ahren/Procedura d’installazione/ 設置手順 / 安装步骤 1. F asten the two included screws (M5) to the sides of the w all brack et (top).
– 4 – 2. Attach the wall brac kets (top)/(bottom) to the wall as sho wn on the installation drawing (separate sheet). NO TE: The w all br ac k et’ s ( top) wa ll mo unt h oles are 1 9 × 11 e lo.
– 5 – 3. Place a protectiv e sheet on a table or other flat surface, then place the monitor on top with the back of the monitor facing up . Remov e the two optional stand holders attached to the bottom of the monitor and the two handles attached to the sides of the monitor .
– 6 – 4. Mount the monitor brac kets (top)/(bottom) to the top and bottom of the back of the monitor using the included scre ws (M6). (Fig. 4) NO TE: Mount with the monitor brackets in the direction sho wn on the figure.
– 7 – 5. Lift the monitor, inser t the long projections on the monitor brac ket (bottom) into the two holes in the w all brack et (bottom), hook the projections on the monitor brac ket (top) onto the two screws (M5) included with the w all brack et (top) and fasten temporarily .
– 8 – 6. Connect one end of the chain attached to the wall brac ket (top) to the monitor brac ket (top) using the included screw (M5). (Fig. 6) Connectez l’une des e xtrémités de la chaîne attachée au suppor t mural (haut) au support de moniteur (haut) en utilisant les vis incluses (M5).
– 9 – 7. Remov e the two screws (M5) attached to the top wall br acket in step 1 (Fig. 7-1), then slowly tilt the monitor f orward to provide space f or the wires. (Fig. 7-2) Caution: Do not subject the monitor to shocks or pull it f orward. Do not remov e any other screws.
– 10 – 8. Tilt the monitor back so that it is parallel with the wall, then use the two screws (M5) removed from the monitor brack et (top) and wall brac ket (top) in step 7 to fasten at the specified positions on the left and r ight sides. (Fig. 8) (Be sure to tighten the left and r ight fixing screws with equal f orce.
An important point after buying a device NEC PDWXS 46-55 P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC PDWXS 46-55 P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC PDWXS 46-55 P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC PDWXS 46-55 P you will learn all the available features of the product, as well as information on its operation. The information that you get NEC PDWXS 46-55 P will certainly help you make a decision on the purchase.
If you already are a holder of NEC PDWXS 46-55 P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC PDWXS 46-55 P.
However, one of the most important roles played by the user manual is to help in solving problems with NEC PDWXS 46-55 P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC PDWXS 46-55 P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center