Instruction/ maintenance manual of the product ND-70895 (E) NEC
Go to page of 106
SEPTEMBER, 2000 NEC America, Inc. ND-70895 (E) ISSUE 1 STOCK # 200876 OAI Syst em Manual ®.
LIABILITY DISCLAIMER NEC America, I nc. reserves t he right to change th e specificati ons, functions, or features, at any time, wit hout no tice. NEC America, Inc. ha s prepared this document for use by its employees and customers. The informati on contained herein i s the propert y of NEC America, Inc.
ISSUE 1 ISSUE 2 ISS UE 3 ISS U E 4 D A TE SEPTEMBER, 2000 D A TE D A TE D A TE ISSUE 5 ISSUE 6 ISS UE 7 ISS U E 8 DA T E DA TE DA T E DA T E NEAX240 0 IMX OAI System Manual Issue Re vision Sheet 1/2 ND-70895 (E) ISSUE 1 PA G E N o .
ISSUE 1 ISSUE 2 ISS UE 3 ISS U E 4 D A TE SEPTEMBER, 2000 D A TE D A TE D A TE ISSUE 5 ISSUE 6 ISS UE 7 ISS U E 8 DA T E DA TE DA T E DA T E NEAX240 0 IMX OAI System Manual Issue Re vision Sheet 2/2 N.
ND-70895 (E ) ISSUE 1 SEPTE MBER, 2000 NEAX2400 IMX O AI Syst em Man ual T ABLE OF CONTENTS Pag e ND-70895 (E) T ABLE OF CONTENTS Pag e i Revision 1.0 CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T ABLE OF CONTENTS ND-70895 (E) Pa g e i i Revision 1.0 T ABLE OF CONTENTS (CONTINUED) Pag e AADT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ND-70895 (E) T ABLE OF CONTENTS P age iii Re vis ion 1.0 T ABLE OF CONTENTS (CONTINUED) Pag e CHAPTER 6 MAIN TENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 1. General . .
LIST OF FIGURES Figure Title Pa g e ND-70895 (E ) LIST O F FI GURES Pag e i v Re vis ion 1.0 Figure 2-1 Software Structure in the OAI Sys tem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Figure 2-2 Concept of MSF .
LIST OF T ABLES T able Title Pa g e ND-70895 (E ) LIST OF T ABLES Pag e v Revision 1.0 Table 1-1 Configur ation of This Manu al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table 1-2 Related Ref erence Manu al .
LIST OF T ABLES ND-70895 (E ) Pa g e v i Revision 1.0 This page is for yo ur notes..
ND-70895 (E) CHAPTER 1 Page 1 Revision 1. 0 CHAPTER 1 INTR ODUCTION 1. General This manual descr ibes the o utlin e, instal lation pr ocedur e/insta llation tests, and vario us phase s of mainte nance work of an OAI (Open Appl ication Interf ace) syste m which realiz es the NEAX2400 IMX and a compu ter syste m.
CHAPTER 1 ND-70895 (E) Page 2 Revision 1. 0 INTR ODUCTION How to Fo llow the Manual 2.2 Rela te d Reference Manual The in stallat ion tasks for th e NEAX2400 IMX OAI Sys tem consis t of th ose relat ed to the NEAX24 00 IMX system a nd tho se relat ed to t he OAI f unctions .
ND-70895 (E) CHAPTER 2 Page 3 Revision 1. 0 CHAPTER 2 SYSTE M OUTLINE 1. General This chapte r describes the con cep t, functi ons , and confi gur ati on of the NEAX2 400 IMX OAI System. Before pe rforming i nstall ation and/or maintenanc e of t he NEAX2400 IMX OAI System, read this cha pter care fully.
CHAPTER 2 ND-70895 (E) Page 4 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine 2. System Outline 2.1 O AI (Open Applica tion Interface) System 1. The O AI system is the in terf ace th at joins a va riety.
ND-70895 (E) CHAPTER 2 Page 5 Revision 1. 0 SYSTEM OUTLINE System Outli ne Figu re 2- 1 Sof twa re St ruct ure in th e OAI System Inpu t Proc essing Block Digit Coun t Key Rece iving Other I Off-Hook/.
CHAPTER 2 ND-70895 (E) Page 6 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine 2.2.1 Facilities Each of t he unit function s of the NEAX2400 IMX, such as switch con trol fun ction, termina l contro l function, etc., that can be controlled by the application of the computer is referred to as “facility”.
ND-70895 (E) CHAPTER 2 Page 7 Revision 1. 0 SYSTEM OUTLINE System Outli ne (b) Ter m i nal Multi p le Infor mation Transf er Faci lity (T MF ) This facilit y execute s batc h transfe r of d ial nu mber inf ormati on entere d from a t ermina l, card informat ion provide d from the card reader, et c.
CHAPTER 2 ND-70895 (E) Page 8 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine (d) Authorizat ion Code Fa cil ity (A CF) Upon accep ting a connect ion reque st and/ or a servic e request from a t ermina .
ND-70895 (E) CHAPTER 2 Page 9 Revision 1. 0 SYSTEM OUTLINE System Outli ne 2. Performe r F acilitie s (a) T er minal C ontro l F acility (TCF) This f acil ity cont rols the LCD, LED, etc . on a termina l concern ed as p er a cont rol or der pr o vided by the AP .
CHAPTER 2 ND-70895 (E) Page 1 0 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine (c) D ial Numb er Transfer Facility (NTF) When a te rm inal con c erned is o n the term in al mode , this faci lity tr an sfers th e diale d number infor mation fr om tha t specific te rm inal to th e AP .
ND-70895 (E) CHAPTER 2 Page 11 Revision 1. 0 SYSTEM OUTLINE System Outli ne (e) Res tricti on Contro l F acili ty (RCF) This fa cility change s the restrict ion class of a termin al concerned in acc ordance with a direc tiv e gi ven by th e AP .
CHAPTER 2 ND-70895 (E) Page 1 2 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine (g) Applicatio n Languag e Transfer Facil ity (A TF) With a di rectio n recei ve d from the AP o r a spec if ic key de pres se d on a te rm i nal, t his fa ci lity s en d s out the A PL i nform ation input from an OA I term inal to the AP.
ND-70895 (E) CHAPTER 2 Page 13 Revision 1. 0 SYSTEM OUTLINE System Outli ne 2.2.2 Join of Facilities and Applic ation 1. When a f aci lity of the NEAX2400 IMX is c ontrol led by the Appl icat ion Prog ram ( AP) on th e U AP computer , the AP and that f acilit y must be conn ected fi rst.
CHAPTER 2 ND-70895 (E) Page 1 4 Revision 1. 0 SYSTEM OUTLINE System Conf igu ratio n 3. System Configuration The OAI System can be implemented in the Built-in Type configuration, with which the IP is bu ilt in the CPU of t he NEAX2400 IMX. The c onfigu ration of the NEAX 2400 IM X OAI Sy st em is a s follow s.
ND-70895 (E) CHAPTER 2 Page 15 Revision 1. 0 SYSTEM OUTLINE System Conf igu ratio n 1. The conf igur ation of the NEAX2400 IMX O AI Syst em is as foll o ws.
CHAPTER 2 ND-70895 (E) Page 1 6 Revision 1. 0 SYSTEM OUTLINE System Conf igu ratio n Figure 2-15 IP Dual System Config u ration Dual System Conf igur at ion of NEAX2400 IMX IMG SYMBOL SYMBOL N AME CIR.
ND-70895 (E) CHAPTER 2 Page 17 Revision 1. 0 SYSTEM OUTLINE Interface with Exter na l Computer 4. Interface with Exter nal Computer 4.1 Conditions f or Interface with External Computer The ci rcuit ca.
CHAPTER 2 ND-70895 (E) Page 1 8 Revision 1. 0 This page is for yo ur notes..
ND-70895 (E) CHAPTER 3 Page 19 Revision 1. 0 CHAPTER 3 INST ALLA TION PRO CEDURE 1. General This chapte r explains the ins tal l ation procedu re for OAI System of NEAX2 400 IMX.
CHAPTER 3 ND-70895 (E) Page 2 0 Revision 1. 0 INST ALLA TION PROCEDURE Cable C onnections with Ex ternal C omputer 2. Cable Connections with Ext ernal Comput er This section e xplains c able conne ctions betwee n the NEAX240 0 IMX OAI Sys tem and the ext ernal computer .
ND-70895 (E) CHAPTER 3 Page 21 Revision 1. 0 INST ALLA TION PROCEDURE OAI S oftware Instal lation 3. O AI Sof tware Install ati on This sect ion ex plains th e inst allatio n procedur e for ad ding th e OAI softwar e to the PBX in off-l ine operat ion.
CHAPTER 3 ND-70895 (E) Page 2 2 Revision 1. 0 INST ALLA TION PROCEDURE OAI Softwar e Installati on STEP 6: Assig n the system da ta wri tten in LDM. ASYDL SYS1 INDEX512: FPC of the s elf-node When OAI system is used throug h the Fusio n Network, this d ata settin g is n ecessary at each nod e in the network .
ND-70895 (E) CHAPTER 3 Page 23 Revision 1. 0 INST ALLA TION PROCEDURE Upgradi ng OAI Syste m from NE AX 240 0 ICS to NEAX2 400 IMX 4. Upgrading O AI System fr om NEAX2400 ICS to NEAX2400 IMX The proce dure for u pgrading OAI System NEAX240 0 ICS to NEAX24 00 IMX is shown b elow.
CHAPTER 3 ND-70895 (E) Page 2 4 Revision 1. 0 This page is for yo ur notes..
ND-70895 (E) CHAPTER 4 Page 25 Revision 1. 0 CHAPTER 4 COMMANDS 1. General This chapt er exp lains the commands that a re used in t he NEAX2400 IMX OAI Sys tem. The co ntents of t his Chapter a re outlined bel ow. • Conf igur at ion of Commands for O AI Syst em This secti on e xpla ins the constru ctio n of each command.
CHAPTER 4 ND-70895 (E) Page 2 6 Revision 1. 0 COMMANDS Configuratio n of Comman ds f or OAI System 2. Configuration of Commands for OAI System 2.1 Confi guration of C o mmands The conf igur ation of the comman ds in use in the NEAX2400 IMX OAI System is sh own in Figure 4-1 .
ND-70895 (E) CHAPTER 4 Page 27 Revision 1. 0 COMMANDS Commands 3. Commands This section e xplains t he commands in used in th e OAI Syst em. 3.1 List of Commands T able 4-1 sho ws a l ist of co mmands i n us e i n t he O AI system.
CHAPTER 4 ND-70895 (E) Page 2 8 Revision 1. 0 COMMANDS Commands 3.2 Outli ne o f Comman ds for O AI Sy stem The i nterr elation among the commands t o be used in t he OA I System is illu strated in Figure 4 -2 .
ND-70895 (E) CHAPTER 4 Page 29 Revision 1. 0 COMMANDS AADT AADT: Assignment of Announcement/Dictation T runks 1. Function s This command is used to ass ig n/del ete Announce men t T runks or Dictat i on T runks.
CHAPTER 4 ND-70895 (E) Page 3 0 Revision 1. 0 COMMANDS AADT Announcement /Dictat ion T r unk Data Assign ment T able Disconnec t T imer 0 = I mpossibl e 1 = Possible TR UNK TYPE (TYPE) ANT/DCT MESSA GE NO .
ND-70895 (E) CHAPTER 4 Page 31 Revision 1. 0 COMMANDS A CNO ACNO: Assignment of Con ver sion Number Data 5. Function s This co mmand is used to assign/d elete the con vers ion n umber requi red for s electin g a rout e on a each r oute basis. 6. Precaut ion (a) The data should b e assigned t o ring-d own trunks.
CHAPTER 4 ND-70895 (E) Page 3 2 Revision 1. 0 COMMANDS AC N O Con versio n Number Dat a Assignment T able Note: Max. 6 digits when using in a hotel system EXTERNAL ROUTE NUMBER (RT) TENANT NUMBER OF MONIT ORED NUMBER (TN) MONIT ORED NUMBER (MNO) MAX.
ND-70895 (E) CHAPTER 4 Page 33 Revision 1. 0 COMMANDS AKYD AKYD: Assignment of Ke y Data f or D term 9. Function s This command is used to as sign/del ete/dis play the fu nction ke y data, multi -line dat a or interc om data corres ponding to each k ey on such mul ti-func tion tele phone t erminal as D term Series E.
CHAPTER 4 ND-70895 (E) Page 3 4 Revision 1. 0 COMMANDS AMNO AMNO: Assignment o f Mo nitored Number 12. Fun ctio ns This command is used to ass ig n/del ete Monit ored Numbers . 13. Prec aution Monitored Number (MON) is a numbe r of maximum 5 digits consisting of 0 ~ 9, “*” and “#”.
ND-70895 (E) CHAPTER 4 Page 35 Revision 1. 0 COMMANDS AMNO Monitored Number Assign ment T able Note 1: Max. 6 digits when using in a hotel system Note 2: Data to be ent ered fo r a hotel s ystem Going by UCD whe n monito red statu s is not requested from AP :0/1 = Not Going By UCD/Going By UCD.
CHAPTER 4 ND-70895 (E) Page 3 6 Revision 1. 0 COMMANDS AOA C AOAC: Assignment of O AI Acce ss Code 16. Fun ctio ns This command i s used t o assi gn/del ete t he F acil ity Ki nd and th e Operat ion Code on a b asis o f each s ervic e acces s co de of the OAI Syst em.
ND-70895 (E) CHAPTER 4 Page 37 Revision 1. 0 COMMANDS AOA C O AI Acc ess Code Data Ass ignment T able Note: The number o f digi ts fo r O AI Acces s Codes is to be se t by A OKC command.
CHAPTER 4 ND-70895 (E) Page 3 8 Revision 1. 0 COMMANDS AO K C AOKC: Assignment of O AI Ke y Code 20. Fun ctio ns This comman d is used to assi gn/delet e the F acility Ki nd and the Operat ion Code on a basis of each functi on key on th e D term . 21.
ND-70895 (E) CHAPTER 4 Page 39 Revision 1. 0 COMMANDS AO K C Note 1: The r elationsh ip betwee n this p ar ameter and the AKYD co mmand p aramet er FKY = 34 ~ 47 is shown belo w . Note 2: Enter th is par ameter onl y when F-KIND = 3. Note 3: This parameter can be ente red o n ly when F-KIND = 1, 2.
CHAPTER 4 ND-70895 (E) Page 4 0 Revision 1. 0 COMMANDS AO K C O AI K ey Code Data Assign ment T a ble Note 1: This par ameter is to be enter ed only when F-KIND = 3. Note 2: This par ameter is to be enter ed only when F-KIND = 1, 2. Note 3: The KEY -CODE for whic h F-KIND = 3 can be a ssigne d is onl y one per s ystem.
ND-70895 (E) CHAPTER 4 Page 41 Revision 1. 0 COMMANDS AO K C T able of Operatio n Codes OPERA TION CODE REMARKS 128 (0 080): MS F 191 (0 0BF): MSF OA I (T erminal Mode Set Facility) 192 (0 0C0): TMF 2.
CHAPTER 4 ND-70895 (E) Page 4 2 Revision 1. 0 COMMANDS ASP A ASPA: Assignment of Specific Access Code 24. Fun ctio ns This comma nd is used t o assign/d elete /displa y each da ta which res pecti v ely de termin es what kind o f servic e should be ex ecut ed and/or whi ch route sh ould be used, et c.
ND-70895 (E) CHAPTER 4 Page 43 Revision 1. 0 COMMANDS ASYD ASYD: Assignment of System Data 27. Fun ctio ns This command is used to ass ig n Syste m Data 1, 2, and 3. 28. Prec aution For the de tails of th e syste m data, re fer to the d escript ion of ASYD co mmand in the Off ice Da ta Specif ica tion for the NEAX2400 IMX.
CHAPTER 4 ND-70895 (E) Page 4 4 Revision 1. 0 COMMANDS ASYD System Data Assign T able (1) The Offic e Data Sheet s of this ASYD co mmand are pr ovided onl y for the da ta to be assigned in the OAI System. Use these Offic e Data Sheet s tog ether with those for ASYD comman d of the NEAX2400 IMX.
ND-70895 (E) CHAPTER 4 Page 45 Revision 1. 0 COMMANDS ASYD Syst em D ata As sign T ab le (1) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 25 5 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 1 31 04 0b 0 Equipp ed capacity of t he Common Memory (CM): 1 ~ 4 Mbyte Assign “6” Hex.
CHAPTER 4 ND-70895 (E) Page 4 6 Revision 1. 0 COMMANDS ASYD 1 70 b 0 Calle d Number Dis play when fo rwardi ng to Attendant Console 0/1 : Out/In service b 1 Flashi ng disp lay of Line Locko ut on A tten dan t Console BLF 0/1 : In s ervice/Out b 2 Route No.
ND-70895 (E) CHAPTER 4 Page 47 Revision 1. 0 COMMANDS ASYD Note 1: When the bit is s et to “0” the bottom line displ ay of the Message W ai ting Enhance Display Servi ce becomes in valid.
CHAPTER 4 ND-70895 (E) Page 4 8 Revision 1. 0 COMMANDS ASYD Syst em D at a Ass ign T able (1 ) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 255 DA T A (D A T A) 00– FF (Hex) BIT CORRE-.
ND-70895 (E) CHAPTER 4 Page 49 Revision 1. 0 COMMANDS ASYD System Data As sign T able (1) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 255 DA T A (D A T A) 00– F F (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 1 207 b 0 No.
CHAPTER 4 ND-70895 (E) Page 5 0 Revision 1. 0 COMMANDS ASYD Note: This ti mer data i s e xclus ively fo r the funct ion fo r batc h tr ansfer (TMF) of O AI dial number f r om a single- line t elephone s et. Ther e for e, this t imer dat a is in valid for TMF f r om a D term .
ND-70895 (E) CHAPTER 4 Page 51 Revision 1. 0 COMMANDS ASYD System Data Assign Table ( 1) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 25 5 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPON.
CHAPTER 4 ND-70895 (E) Page 5 2 Revision 1. 0 COMMANDS ASYD System Data Assign T able (3) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 25 5 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPO.
ND-70895 (E) CHAPTER 4 Page 53 Revision 1. 0 COMMANDS DFLN DFL N: Disp la y of Loca ti on F ree Number ing 29. Fun ctio ns This comman d is used to check the assigne d data of Locat ion Free Numbering Servic e. When t his comm and is ac ti vated, the assig n ed data a r e disp layed on a basis of each desi gnated st ation nu m ber.
CHAPTER 4 ND-70895 (E) Page 5 4 Revision 1. 0 COMMANDS ASYD N ASYDN: Assignment of System Data in NDM 33. Fu nction This command is used to ass ig n syst em data 1 and 2. 34. Prec aution s 1. This section only expla ins abo ut ASYDN command for OAI system.
ND-70895 (E) CHAPTER 4 Page 55 Revision 1. 0 COMMANDS ASYDN Note 1: When the al l Fusion nodes in the net work ar e used for “MUL TI PLE IPs”, t his data may be assi gned using ASYDN. Note 2: A vailabl e since the Se ries 7400 (Relea se 8) s oftwar e.
CHAPTER 4 ND-70895 (E) Page 5 6 Revision 1. 0 COMMANDS ASYD L ASYDL: Assignment of System Data into Local DM (LDM) 36. Fu nction This command is used to assig n and change sys tem data for O AI acti vate d via FCCS. 37. Prec aution s ASYDL command is c omprised wit h System Dat a-1, INDEX 512-1 535.
ND-70895 (E) CHAPTER 4 Page 57 Revision 1. 0 COMMANDS ASYD L SYSTEM DA T A TYPE (SYS) SYST EM DA T A INDEX (INDEX) 512-1535 DA T A (D A T A) 00 – FF (Hex) BIT CORRESPONDING DA T A SYSTEM D A T A CONTENT S DA T A 0/1 BIT 1 512 b 0 Fusion Point Code (FPC) of self node in he xadeci mal.
CHAPTER 4 ND-70895 (E) Page 5 8 Revision 1. 0 COMMANDS ASYD L 1 523 Default Gatew ay Address of External LAN Gate w ay Address (IP add ress of Router) of Netwo rk connecti ng PBX. Note: This data is valid when the PBX is connected to the e xternal PC LA N.
ND-70895 (E) CHAPTER 5 Page 59 Revision 1. 0 CHAPTER 5 OFFICE D A T A DESIGN 1. General This chapt er explai ns the proced ure for sett ing the offic e data requi red in the NEAX2400 IMX OAI Syst em. As for th e of fice da ta sett ing p rocedu re of the N EAX24 00 IM X Syst em its elf, re fer to the S ystem Data Design Manual.
CHAPTER 5 ND-70895 (E) Page 6 0 Revision 1. 0 OFFICE D A T A DESIGN Proced ure for Setting Basic Offic e Data for O AI Sys tem 2. Procedure f or Setting Basic Offi ce Data f or O AI System The proce dure f or setti ng the off ice data for OAI syst em is expl ained in the fol lowing.
ND-70895 (E) CHAPTER 5 Page 61 Revision 1. 0 OFFICE D A T A DESIGN Proce dure f or Setti ng Basic Offi ce Data f or O AI System 2.2 Data for O AI T ermin al In the ca se of D term 1.
CHAPTER 5 ND-70895 (E) Page 6 2 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3. Procedure f or Setting Office Dat a f or O AI Services This sec tion e xplains t he outli ne, using c ondition s, and of fice dat a setti ng procedu re of the main OAI s ervice functi ons.
ND-70895 (E) CHAPTER 5 Page 63 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.1.2 Using Conditions 1. Normal and abnormal operat ing sequ ences perta ining to the basi c connecti on of the SCF are as descri bed bel ow .
CHAPTER 5 ND-70895 (E) Page 6 4 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices [Abnormal Seque nce ] (a) Upon re cei vin g SCF start reques t from the AP , the NEAX2400 IMX judge s the status ( idle, b usy , makebusy , e tc.
ND-70895 (E) CHAPTER 5 Page 65 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.1.3 Data Programming Assignment 1.
CHAPTER 5 ND-70895 (E) Page 6 6 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.2 Call ID Notific ation (SMFN for ISDN) 3.
ND-70895 (E) CHAPTER 5 Page 67 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 4. Wh en an incom ing cal l termin ates from ISDN net work, ISD N caller ’ s numbe r infor mation (subscr iber’ s number and sub-addr ess) is prov ided fr om the cent ral of fice i n the follo wi ng format.
CHAPTER 5 ND-70895 (E) Page 6 8 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.3 MWL Contr ol (SSF) S TEP-1 3.
ND-70895 (E) CHAPTER 5 Page 69 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.3.2 Using Conditions 1. Normal and abnormal operatin g sequences pertain ing to th e basic connectio n of the SSFR are as descri bed bel ow .
CHAPTER 5 ND-70895 (E) Page 7 0 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 2. This servi ce cannot be used si multaneousl y with other MW control se rvices (VMM/MCI: Message Center Interf ace/Mes sa ge W aiting from Station, A TTCON and MA T).
ND-70895 (E) CHAPTER 5 Page 71 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.3.3 Data Programming Assignment 1. ASYD (System Data) SYS1 IN DE X 7 7 b2: 0 (MW La m p Refr es h Cont rol is in serv ic e ) IN DE X 1 7 9 b6: 0 (OAI se rvice s are p rovided ) 2.
CHAPTER 5 ND-70895 (E) Page 7 2 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.4 TCP/ IP Address (Assignment f rom M AT) 3.
ND-70895 (E) CHAPTER 5 Page 73 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.4.3 Data Programming TCP/IP Address Assi gnment 1. Assignment ASYD L (Sys te m Data (L DM)) Assign TCP/ IP address SYS1 INDEX 515 ~ 518 2.
CHAPTER 5 ND-70895 (E) Page 7 4 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.5 Name Disp lay 3.5.1 Functional Outline This servi ce is for di splaying inf ormation (use r’ s name, st ation number , etc.
ND-70895 (E) CHAPTER 5 Page 75 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.5.3 Data Programming (Se t up from User’ s Application ) 1.
CHAPTER 5 ND-70895 (E) Page 7 6 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.6 Inter Node Name Display 3.6.1 Functional Outline Name Displa y Service is a v ailab le betw een the netw or k. Nam e Displa y Servic e means fo r the facility of displa ying le tters (a lphabe t and etc.
ND-70895 (E) CHAPTER 5 Page 77 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 11. The objecte d termi nal of Name Displ ay Service is only D term which has LCD. 12. “Of fi ce Code” + “Sta tion Number” i s normally d isplayed.
CHAPTER 5 ND-70895 (E) Page 7 8 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.6.3 Data Programming (Se t up from User’ s Application ) Assignment Those be lo w a re e xplanat ion of the Ass ignment accordi ng to Name I nformat ion which is set up from User’ s Application.
ND-70895 (E) CHAPTER 5 Page 79 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.7 O AI Fusion Main adv antages of O AI Fusion fal l do wn into th e follo wi ng. O AI Fusi on syste ms can be divided into the follo wing two types: • O AI T erm in a l Anywhere • Mul ti ple IP s 3.
CHAPTER 5 ND-70895 (E) Page 8 0 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices (d) The node that accommoda te s t he IP mus t be initi alized wh en all the oth er nodes are in on-li ne mode.
ND-70895 (E) CHAPTER 5 Page 81 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.7.2 Multiple IPs 3.7.2.1 Functional Outline In this conf igura tion (Mul tiple IP s), IP can be accommodated t o multip le nodes in a Fusion Ne twork.
CHAPTER 5 ND-70895 (E) Page 8 2 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices (e) O AI terminals to be controlled from different IPs ca n not be accommo da ted in a node.
ND-70895 (E) CHAPTER 5 Page 83 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 1. T h e following a re the q uick re fe rence ta b le of op t ional softwa re and s ys tem data p rogr a mmi ng f or each O AI system conf igurat ion.
CHAPTER 5 ND-70895 (E) Page 8 4 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 2. Some not ices for PBX commands data pr ogramming ar e describ ed belo w . (See Figur e 5-1 “ Networ k Conf i gur at ion of O AI sys tems ” for n etwo rk conf igura tion o f O AI s ystems.
ND-70895 (E) CHAPTER 5 Page 85 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.7.3 Example of Us e of Facility on Fusion Network As a e xample of us e of f aciliti es thro ugh Fusi on Netw ork, the e xplanati ons will g i v e in the follo wi ng about Fre e Locatio n F acili ty (FLF ).
CHAPTER 5 ND-70895 (E) Page 8 6 Revision 1. 0 This page is for yo ur notes..
ND-70895 (E) CHAPTER 6 Page 87 Revision 1. 0 CHAPTER 6 MAINTENANCE This chapt er explains main tenance, fault diagnosis out of syste m message s, fault repair proce dure of the NEAX2400 IMX OAI Syste m .
CHAPTER 6 ND-70895 (E) Page 8 8 Revision 1. 0 MAINTENANCE Maintenan ce 2. Maintenance 2.1 Routine Maintenance By the routine ma intenance on t he NEAX2400 I MX O AI S ystem, t he follo win g are pe rformed. 1. Syste m messages pert ainin g to O AI faul ts A check is made to see if an y syste m message pert aining to O AI fa ults is printed out .
ND-70895 (E) CHAPTER 6 Page 89 Revision 1. 0 MAINTENANCE System M essages 3. System Messages 3.1 O utli ne If any of the NEAX2400 IMX OAI functions becomes faulty , the corre sponding system message sh own in T able 6-2 is displ ayed. Th is sect ion e xpl ains the mea nin g of e ach sy stem mes sage a nd messa ge detail d ata.
CHAPTER 6 ND-70895 (E) Page 9 0 Revision 1. 0 MAINTENANCE System Messa ges 3.2 Messag e Detail Dat a This para graph de scribes t he detail ed infor mation on the fau lts indic ated by system message s (messag e detai l data). 3.2.1 Messag e Detail Dat a of System Mes sage “4-R ” System Message 4-R: TCP/IP Li nk Fai lure 1.
ND-70895 (E) CHAPTER 6 Page 91 Revision 1. 0 MAINTENANCE System M essages 3.2.2 Messag e Detail Dat a of Syst em Message “26 - V” System Messa ge 26-V : LAN Interface Erro r Report ( O AI /M IS) 1. Prin t- out F ormat 2. Prin t- out infor m ati on (typical ) -TCP/IP pa rt- ~ IP add ress o f the err or -dete cted O AI/MIS termi nal ~ Port N o.
CHAPTER 6 ND-70895 (E) Page 9 2 Revision 1. 0 MAINTENANCE F aul t Diagnosis 4. Fault Di agnosis 4.1 General If a f ault occurs t o the NEAX2400 IMX O AI Sys tem, the c orresponding syst em message is d isplayed. This sectio n e xplains t he pro cedure s of f aul t diagnosi s by sy stem messag es and of fau lt repairs .
ND-70895 (E) CHAPTER 6 Page 93 Revision 1. 0 MAINTENANCE F aul t Diagnosis 4.2 Diagnosis fr om System Messa ges The fl o w of w orks fr om dia gnosis o f syste m message u p to discovery of the cause of the fau lt is s how n in Figure 6- 3 .
CHAPTER 6 ND-70895 (E) Page 9 4 Revision 1. 0 MAINTENANCE F aul t Diagnosis 4.2.1 TCP/IP Link Failure For det ails of Sy stem Mass age “ 4-R ” and “ 26-V ” , see Section 3.2.1 an d 3.2.2 in this Ch apter . According to each f ault situation, perf orm the repairing p rocedure referring to Ta b l e 6 - 4 and Ta b l e 6 - 5 .
ND-70895 (E) CHAPTER 6 Page 95 Revision 1. 0 MAINTENANCE F aul t Diagnosis Host is still abn o rm al st at u s? Host is o ut of o rder . Repair the Hos t computer . PZ-PC19 (LANI) card i s out of orde r . F or the repla cement proc edure, See “ Sys tem Operation an d Maintenance Ma nual ” .
CHAPTER 6 ND-70895 (E) Page 9 6 Revision 1. 0 This page is for yo ur notes..
An important point after buying a device NEC ND-70895 (E) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC ND-70895 (E) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC ND-70895 (E) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC ND-70895 (E) you will learn all the available features of the product, as well as information on its operation. The information that you get NEC ND-70895 (E) will certainly help you make a decision on the purchase.
If you already are a holder of NEC ND-70895 (E), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC ND-70895 (E).
However, one of the most important roles played by the user manual is to help in solving problems with NEC ND-70895 (E). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC ND-70895 (E) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
