Instruction/ maintenance manual of the product Dterm Analog Cordless Telephone NEC
Go to page of 10
User’s Guide D term Analog Cordless ®.
1 Controls and Functions 1 memory – Enters or recalls numb ers in mem- ory. 2 talk – Answers or places calls. 3 tone – Switches to tone dialing in pulse dial mo de. 4 redial – Redials the last number. 5 pause – Adds a timed pause in a memory dialing sequ ence.
2 Connecting the Base Unit 1. Connect the telephone li ne cord to the “TEL LINE” jack on the base un it and to a telephone outlet. 2. Connect the AC adapter to the DC IN 9V jack and to a standard 120 V AC wall outlet. 3. Set the base unit on a desk or tabletop and place the handset on the base unit.
3 Receiver, Ringer Tone and Volume Control The telephone has two ringer tones and each tone has two volume levels. While the telephone is id le, continue to press volume until you hear the ringer tone and volume level you want. The telephone has four rece iver volume levels: Low , Medium , High , Maximum .
4 Storing Mixed Tone/Pulse Numbers If the telephone is set up for pul se dialing, mixed mode numbers can be stored to easily access long distance services. 1. Remove the handset from the base unit. 2. Press memory . (The talk/battery low LED flashes and a beep is heard.
5 Replacing a Stored Number When you enter the me mory location number, any number pr eviously stored for the memory location is replaced. Erasing a Stored Number 1. Remove the handset from the base unit. 2. Press memory twice. 3. Enter the memory location nu mber (0~9) you want to eras e.
6 Headset Installation Your telephone may be used with an optional headset. To use this feature, si mply plug the headset into the headset jack on the handse t.
7 Beltclip Installation 1. Insert the beltclip into the holes on each side of the handset. 2. Press down firmly until it clicks into the holes. If you have wall mounted the base, you cannot place the handset with the keypad facing inside. Pull both sides of the beltclip out of the holes to remove.
8 Optional Available Parts Part Description Stock Number Headset with Foam Covered Ea r and Microphone 730616 Replacement AC Adapter for Base Unit 760625 Replacement String-Type Beltclip 730624 Replac.
750229-0 © 2001 NEC America, Inc. The material contained herein is subject to change without prior notice at the sole discretion of NEC America, Inc. D term ® is a registered trademark of NEC Corporation. AutoTalk, AutoStandby, Random Code, UltraClear Plus, and AutoSecure are trademarks of Uniden America Corporation.
An important point after buying a device NEC Dterm Analog Cordless Telephone (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC Dterm Analog Cordless Telephone yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC Dterm Analog Cordless Telephone - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC Dterm Analog Cordless Telephone you will learn all the available features of the product, as well as information on its operation. The information that you get NEC Dterm Analog Cordless Telephone will certainly help you make a decision on the purchase.
If you already are a holder of NEC Dterm Analog Cordless Telephone, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC Dterm Analog Cordless Telephone.
However, one of the most important roles played by the user manual is to help in solving problems with NEC Dterm Analog Cordless Telephone. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC Dterm Analog Cordless Telephone along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
